Lubluelu SL61 Robot Vacuum and Mop Combo Instruction Manual

1. Introduction

The Lubluelu SL61 Robot Vacuum and Mop Combo is an advanced 3-in-1 cleaning device designed to efficiently vacuum and mop various floor types. Featuring precision LDS9.0 LiDAR mapping technology, 4000Pa suction power, and smart app control, it offers a comprehensive solution for maintaining a clean home environment. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your SL61 robot vacuum. Please read all instructions carefully before use to ensure optimal performance and safety.

2. Package Contents

Before beginning setup, please verify that all components are present in the package:

• 1 x SL61 Robot Vacuum
• 1 x 2-in-1 Dustbin and Water Tank
• 1 x Charging Base
• 1 x Power Adapter
• 1 x Mop Cloth
• 1 x Mop Holder
• 1 x User Manual
• 2 x Side Brush
• 1 x Cleaning Tool

Image: Lubluelu SL61 Robot Vacuum and its accessories, including the main unit, charging base, power cord, side brushes, mopping pads, and cleaning tools.

3. Setup Guide

3.1 Charging Base Placement

Place the charging base against a wall on a hard floor. Ensure there is at least 0.5 meters (20 inches) of clear space on each side of the base and 1.5 meters (5 feet) in front of it. Do not place the charging base in direct sunlight or a reflective area.

Image: Optimal placement of the charging base, indicating required clear distances from walls and in front of the base for proper robot navigation and docking.

3.2 Robot Preparation

Before first use, remove all protective films and strips from the robot. Install the side brushes by matching the color (Red for L, Black for R) to the corresponding slots on the underside of the robot. Press firmly until you hear a click, indicating secure engagement.

3.3 Water Tank Preparation

Attach the mopping pad to the mopping pad plate. Fill the water tank with clean water. It is necessary to deflect the water tank to the opposite direction of the water injection port to see if the tank is filled with water. Once filled, insert the water tank into the robot vacuum cleaner.

3.4 APP Download and Network Setup

Connect your mobile phone to a 2.4GHz Wi-Fi network and turn on Bluetooth. Scan the QR code in the instruction manual or download the 'Smart Life' APP from your device's app store. Install the app, register, and log in. Follow the in-app instructions to add your SL61 robot vacuum. Ensure you grant the app necessary permissions.

4. Operating Instructions

4.1 Power On/Off

To power on the robot, press and hold the power button for 3 seconds until the robot voice prompts "Power on". To power off, press and hold the power button again.

4.2 Cleaning Modes

The SL61 offers various cleaning modes accessible via the Smart Life app:

• Automatic Cleaning: The robot intelligently cleans the entire area.
• Edge Cleaning: Focuses on cleaning along walls and furniture edges.
• Zone Cleaning: Allows you to define specific areas for cleaning.
• Spot Cleaning: Concentrates on a small, dirty area.
• Double Cleaning: Performs two passes for thorough cleaning.
• Scheduled Cleaning: Set specific times for cleaning sessions.
• Y-shaped Mopping: Mimics manual mopping for deeper floor cleaning.

4.3 Smart Mapping and No-Go Zones

Utilizing LDS9.0 LiDAR mapping technology, the SL61 accurately maps your home environment, allowing for precise route planning and multi-map storage (up to 5 maps). You can customize cleaning plans and set up to 10 electronic No-Go Zones to restrict the robot from certain areas.

Image: The robot vacuum actively mapping its surroundings using LiDAR technology, illustrating its advanced navigation capabilities.

Image: A smartphone screen displaying the robot's mapped area with user-defined electronic no-go zones, preventing access to specific areas.

4.4 Suction Power and Mopping Function

The SL61 provides up to 4000Pa suction power with three adjustable modes, effectively picking up dust, pet hair, and dirt from various surfaces. When carpet is detected, suction automatically increases for deeper cleaning. The precision micro-control water pump supports three levels of water flow adjustment (High/Medium/Low) for effective wet mopping. It is not recommended to use the mopping function on carpets.

Image: The robot vacuum illustrating its three adjustable water levels for mopping, allowing users to control the dampness of the mop pad.

4.5 Continuous Cleaning and Obstacle Avoidance

The robot supports continuous cleaning after breakpoints. If the battery drops to 15% during a cleaning cycle, it will automatically return to the charging base, charge to 80%, and then resume cleaning from where it left off. Equipped with 22 sensors and AI recognition technology, the SL61 effectively avoids obstacles and prevents falls from stairs or edges. It can cross obstacles up to 18mm (0.71 inches) high.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Lubluelu SL61 robot vacuum. Refer to the table below for recommended care and replacement frequencies.

5.1 Dustbin and Water Tank Cleaning

After each cleaning cycle, open the lid, empty the water tank, and the dust bin. Remove the mopping pad plate and take off the mopping pad. It is recommended to clean the dust box every two days. Wipe the inner wall of the dust box with a dry cloth. Take out the HEPA filter and sponge filter. The dust bin can be cleaned with water, but it needs to be dried before using.

5.2 Brush and Wheel Cleaning

Regularly take off the side brush and rolling brush to clean them. It is recommended to clean the side brush and rolling brush once a week. Also, remove any hair or debris from the universal wheel and driving wheels to ensure smooth operation.

5.3 Sensor and Charging Contact Cleaning

Wipe the charging contacts and anti-drop sensors on the robot. Also, wipe the laser radar and infrared bumper sensor. It's recommended to clean the robot body and charging base once a month.

5.4 Recommended Care Frequency and Replacement Frequency

6. Troubleshooting

If you encounter any issues with your Lubluelu SL61 robot vacuum, please refer to the Smart Life app for common solutions or contact customer support. Many issues can be resolved by checking the app's diagnostic messages or performing a simple restart.

7. Specifications

• Brand: Lubluelu
• Model Name: SL61
• Suction Power: 4000Pa
• Navigation: LDS9.0 LiDAR
• Functions: 3-in-1 Vacuum and Mop, Smart Mapping (up to 5 maps), 10 No-Go Zones, App/Alexa Control, Boost-Intellect Technology, Automatic Cleaning, Edge Cleaning, Zone Cleaning, Spot Cleaning, Appointment Cleaning, Y-shaped Mopping.
• Obstacle Clearance: 18mm (0.71 inches)
• Water Flow Adjustment: 3 Levels (High/Medium/Low)
• Battery Life: 120 minutes
• Voltage: 19 Volts
• Dustbin/Water Tank Capacity: 250 Milliliters
• Product Dimensions: 12.8"L x 12.8"W x 3.7"H
• Color: Black
• Filter Type: Cartridge (HEPA and Sponge)
• Compatible Devices: Amazon Echo (Alexa), Google Assistant

8. Warranty and Support

Lubluelu is committed to customer satisfaction and provides full life-cycle technical support for its products. We offer a two-year warranty on the Lubluelu SL61 robot vacuum. If you have any questions or encounter problems during use, please contact our customer service team at any time. Our professional FAE technical support team is available to assist you.

Customer Service Email: service@Lubluelu.com