1. Introduction
Thank you for choosing the Claiks Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read this manual thoroughly before use and retain it for future reference.
1.1 Product Overview
The Claiks Electric Standing Desk is an adjustable height desk designed to promote an ergonomic workspace. It features an electric lift system, a sturdy steel frame, and a spacious desktop.
1.2 Safety Information
WARNING:
- Do not exceed the maximum weight capacity of 176 pounds (80 kg).
- Ensure all screws and bolts are securely tightened before use.
- Keep children and pets away from the desk during operation.
- Do not place hands or other objects near moving parts during height adjustment.
- Disconnect power before cleaning or maintenance.
- Use only the provided power adapter.
For additional safety information, refer to the "Important Information" section of the product listing.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Claiks customer support.
Image: All components of the Claiks Electric Standing Desk laid out, including the two-piece desktop, leg frames, control panel, hooks, and various screws and tools. A note indicates that a Phillips screwdriver is not included.
2.1 Included Components:
- Desktop (Splice Board)
- Leg Frames (Alloy Steel)
- Electric Control Panel
- Power Adapter
- Cable Clips
- Headphone Hooks
- Feet Pads
- Assembly Hardware (screws, bolts, etc.)
- L installation tools
3. Setup and Assembly
The Claiks Electric Standing Desk is designed for easy assembly. It is recommended to assemble the desk with at least one person. A Phillips screwdriver is required but not included.
3.1 Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts against the package contents list.
- Assemble Leg Frames: Attach the crossbars to the lifting columns using the provided screws. Ensure all connections are secure.
- Attach Feet: Secure the feet to the bottom of the leg frames.
- Mount Lifting Columns to Desktop: Place the desktop (splices facing down) onto a soft surface to prevent scratches. Align the pre-drilled holes on the desktop with the mounting points on the lifting columns. Secure the columns to the desktop using the appropriate screws.
- Install Control Panel: Attach the electric control panel to the underside of the desktop in the designated location.
- Connect Cables: Connect the motor cables from the lifting columns to the control panel. Connect the power adapter to the control panel.
- Install Accessories: Attach the headphone hooks and cable clips as desired.
- Final Check: Before plugging in, ensure all screws are tightened and all cables are properly connected and routed to avoid pinching.
Image: A fully assembled Claiks Electric Standing Desk in a home office setting, showcasing its functional design with a monitor, laptop, and accessories.
4. Operating Instructions
The Claiks Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Image: A detailed view of the desk's control panel, highlighting the Up/Down arrows and three numbered memory preset buttons (1, 2, 3).
4.1 Height Adjustment:
- Raise Desk: Press and hold the Up arrow button to raise the desk. Release the button to stop at your desired height.
- Lower Desk: Press and hold the Down arrow button to lower the desk. Release the button to stop at your desired height.
- The desk can be adjusted between 28.3 inches (72 cm) and 46.5 inches (118 cm).
4.2 Memory Presets:
The control panel allows you to save up to three preferred height settings.
- Set a Memory Position:
- Adjust the desk to your desired height using the Up/Down arrows.
- Press and hold one of the numbered preset buttons (1, 2, or 3) until the display flashes or beeps, indicating the height has been saved.
- Recall a Memory Position:
- Press the corresponding numbered preset button (1, 2, or 3). The desk will automatically move to the saved height.
4.3 Quiet Operation:
The desk operates with an ultra-quiet motor, producing approximately 45dB of sound during adjustment, comparable to a quiet library environment.
Image: A graphic illustrating the low noise level of the desk (45dB) compared to other sounds like falling leaves (10dB), normal voice (60dB), and engine sound (90dB).
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Claiks Electric Standing Desk.
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals. Ensure the desk is unplugged before cleaning.
- Check Connections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Cable Management: Keep cables organized using the provided cable clips to prevent damage or entanglement.
6. Troubleshooting
If you encounter issues with your Claiks Electric Standing Desk, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; Overload; Motor error. | Check power connection. Reduce weight on desk. Unplug for 10 minutes, then plug back in. |
| Desk moves unevenly. | Uneven load; Loose connections. | Distribute weight evenly. Check and tighten all assembly screws. |
| Error code on display. | Specific system error. | Refer to the full troubleshooting guide in the included paper manual or contact customer support. |
If the problem persists after attempting these solutions, please contact Claiks customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Claiks |
| Model Number | P1.01.001 |
| Product Dimensions | 40"W x 24"D x 28.3"-46.5"H (101.6cm W x 60.96cm D x 71.9cm-118.1cm H) |
| Color | Rustic Brown Top / Black Frame |
| Material | Alloy Steel (Base), Splice Board (Top) |
| Weight Capacity | 176 Pounds (80 kg) |
| Height Adjustment Range | 28.3" to 46.5" (71.9 cm to 118.1 cm) |
| Lifting Mechanism | Electric |
| Noise Level | Approx. 45dB |
| Assembly Required | Yes |
Image: A diagram showing the key dimensions of the Claiks Electric Standing Desk, including the 40" width, 24" depth, and height range from 28.3" to 46.5". Also shows details of the hook, cable clip, and feet pad.
8. Warranty and Support
8.1 Warranty Information:
The Claiks Electric Standing Desk comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions. This warranty typically covers manufacturing defects under normal use.
8.2 Customer Support:
For any questions, technical assistance, or warranty claims, please contact Claiks customer support through the retailer's platform or visit the official Claiks Store online.
Visit the Claiks Store for more information.
9. Product Disposal
When disposing of the Claiks Electric Standing Desk, please follow local regulations for electronic waste and furniture disposal. Do not dispose of electrical components with general household waste.
