ANCHEER ANA005874

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

ANCHEER 27.5'' Electric Mountain Bike User Manual

Model: ANA005874 | Brand: ANCHEER

1. Setup and Assembly

This section provides step-by-step instructions for assembling your ANCHEER Electric Mountain Bike. Please follow these guidelines carefully to ensure proper setup and safe operation.

1.1 Unboxing and Initial Inspection

Carefully remove all components from the packaging. Inspect all parts for any signs of damage during transit. Ensure all listed components are present before proceeding with assembly.

1.2 Handlebar Assembly

Attach the handlebar to the stem. Ensure the fork bridge of the front fork is facing forward. Securely tighten all screws on the handlebar clamp to prevent movement during riding.

Close-up of the handlebar stem and front fork assembly

Image: Handlebar stem and front fork assembly.

1.3 Front Brake Assembly

Install the front brake caliper onto the fork. Ensure the brake pads are correctly aligned with the rotor and secure the mounting bolts firmly.

1.4 Front Wheel Assembly

Attach the front wheel to the fork. Ensure the quick release skewer is properly secured and the wheel spins freely without any rubbing from the brake pads. Make sure the wheel is centered in the fork.

1.5 Seat Assembly

Insert the seat post into the frame and adjust to a comfortable riding height. Secure the seat post clamp firmly. Ensure the rear reflector is attached to the seat post.

1.6 Kickstand, Headlight, Meter, and Pedals Assembly

Install the kickstand to the designated mounting points on the frame. Attach the front headlight to the fork and the LCD display to the handlebar. Connect the electrical plugs for the meter and front light, noting that the arrows on the surface should be opposite for proper connection. Finally, install the pedals, ensuring the 'L' pedal is threaded onto the left crank arm and the 'R' pedal onto the right crank arm. Tighten them securely.

Close-up of the color screen LCD display on the handlebar

Image: Color screen LCD display showing speed, mileage, PAS level, battery indicator, and backlight.

1.7 Battery Installation

Carefully slide the 48V/10.4Ah removable battery into its designated slot on the frame. Push it firmly until it clicks into place and then lock it securely with the provided key. This ensures the battery is properly connected and prevents accidental removal.

Close-up of the removable 48V 500W 10.4Ah (500Wh) battery on the bike frame

Image: Removable battery securely installed on the bike frame, highlighting its IP54 waterproof rating.

1.8 Assembly Video Guide

For a visual guide on the assembly process, please refer to the official ANCHEER E-Bike Unboxing and Assembly video below:

Video: Official ANCHEER E-Bike Unboxing and Assembly Guide. This video demonstrates each step of the assembly process, from unpacking to final checks, ensuring a smooth setup experience.

2. Operating Your Electric Bike

Understanding the various modes and controls will enhance your riding experience and ensure safe operation.

2.1 Power On/Off

To power on the bike, press and hold the power button on the LCD display until the screen illuminates. To power off, press and hold the same button until the display turns off.

2.2 Riding Modes

  • Pedal Assist Mode (PAS): This mode provides motor assistance as you pedal. Use the '+' and '-' buttons on the display to select from multiple pedal assist levels. Higher levels provide more power and easier pedaling.
  • Throttle Mode: For immediate power without pedaling, engage the thumb throttle. This mode is ideal for quick acceleration or when you need a burst of speed.
  • Normal Bike Mode: You can also ride the bike without any electrical assistance, just like a traditional bicycle.
Diagram showing mileage range for throttle and PAS modes

Image: Illustrates the mileage range achievable in Throttle Mode (26-30 miles) and PAS Mode (50-55 miles) with the 48V 10.4Ah battery.

2.3 Gear Shifting

The ANCHEER Electric Bike is equipped with a 21-speed gear system. Use the gear shifters on the handlebar to change gears according to terrain and desired pedaling effort. Shift smoothly to avoid strain on the drivetrain.

2.4 Braking System

Your bike features mechanical front and rear disc brakes for reliable stopping power. Apply both brake levers smoothly and evenly to slow down or stop. Avoid sudden, harsh braking, especially at high speeds.

Close-up of the bike seat and disc brakes

Image: Detail of the comfortable seat and the mechanical front and rear disc brakes.

2.5 Riding Experience Video

Watch this video to see the ANCHEER Electric Bike in action and learn more about its features:

Video: Upgrade your riding experience with Ancheer electric bike! This video showcases the bike's performance on various terrains and highlights its key features like the powerful motor and comfortable ride.

3. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your electric bike.

3.1 Battery Care

  • Charging: Use only the original charger provided. The 48V/10.4Ah battery supports 3-hour fast charging. Avoid overcharging.
  • Storage: When not in use for extended periods, store the battery in a cool, dry place (10-20°C or 50-68°F) and maintain a charge level between 50-70%. Recharge every 2-3 months.
  • Water Resistance: The battery has an IP54 waterproof rating, protecting it from splashes and light rain. Avoid submerging the battery or bike in water.
Diagram showing the 3-hour fast charge feature with BMS intelligent safety

Image: Illustrates the 3-hour fast charging capability and integrated safety features like BMS Intelligent Safety, Over Charge Protection, Temperature Protection, and Short Circuit Protection.

3.2 Tire Pressure

Check tire pressure before each ride. Maintain the recommended PSI (pounds per square inch) as indicated on the tire sidewall for optimal performance, comfort, and safety.

3.3 Brake Inspection

Regularly inspect brake pads for wear and tear. Ensure brake levers provide firm and responsive braking. If brakes feel spongy or make excessive noise, they may need adjustment or pad replacement.

3.4 Chain and Drivetrain

Keep the chain clean and lubricated to ensure smooth gear changes and prevent premature wear of the drivetrain components. Clean off dirt and grime regularly, especially after riding in wet or dusty conditions.

3.5 General Cleaning

Clean your bike regularly with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components or bearings.

4. Troubleshooting

This section addresses common issues you might encounter with your ANCHEER Electric Bike and provides basic solutions.

  • Bike Not Powering On:
    Ensure the battery is fully charged and properly seated and locked in the frame. Check all electrical connections, especially those leading to the display and motor.
  • Motor Not Engaging:
    Verify that the pedal assist level is set above zero on the LCD display. If using the throttle, ensure it is fully engaged. Check that brake levers are not partially engaged, as they may cut motor power.
  • Brakes Squealing or Rubbing:
    Inspect brake pads for wear, contamination (e.g., oil), or misalignment. Ensure brake calipers are properly aligned with the rotor. The rotor itself should be straight and not bent.
  • LCD Display Issues:
    Check the connection cable to the LCD display. If the display is unresponsive or showing error codes, try turning the bike off and on again. If issues persist, refer to the detailed troubleshooting section in the full manual or contact customer support.
  • Reduced Range:
    Battery range can be affected by terrain, rider weight, temperature, and chosen assist level. Ensure the battery is fully charged. Consider using lower pedal assist levels for extended range.

5. Specifications

Detailed technical specifications for the ANCHEER 27.5'' Electric Mountain Bike.

FeatureSpecification
Bike TypeElectric Bike
Model NameANA005874
BrandANCHEER
Wheel Size27.5 Inches
Motor Wattage500W (Peak 750W)
Battery48V/10.4Ah (500 Watt Hours) Removable
Max Speed22 MPH
RangeUp to 55 Miles (PAS Mode)
Charge Time3 Hours (Fast Charge)
Number of Speeds21
Frame MaterialAluminum
Suspension TypeFront
Brake StyleDisc
Special FeatureLCD-Display
Item Dimensions (LxWxH)69.29 x 24.8 x 39.37 inches
Max Load Capacity265 lbs

6. Warranty Information

The ANCHEER Electric Bike comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to make a claim, please refer to the official ANCHEER website or contact their customer support directly. It is recommended to register your product upon purchase to facilitate any future warranty claims.

7. Customer Support

For any technical assistance, parts replacement, or general inquiries regarding your ANCHEER Electric Bike, please contact ANCHEER customer support. When contacting support, please have your model number (ANA005874) and purchase details ready for faster and more efficient service.

You may find additional resources and FAQs on the official ANCHEER website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.