Polibi Twin XL Daybed

Polibi Twin XL Daybed with Trundles and USB Charging Port

Instruction Manual

1. Introduction

Thank you for choosing the Polibi Twin XL Daybed. This versatile furniture piece is designed to provide comfortable seating and sleeping arrangements, featuring two pull-out trundles for additional guests, integrated storage cubbies, a portable light, and a convenient USB charging port. This manual provides essential information for the safe assembly, operation, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Polibi Twin XL Daybed with Trundles and Storage Cubbies in a bedroom setting

Image 1.1: The Polibi Twin XL Daybed with trundles extended, showcasing its multi-functional design in a bedroom environment.

2. Safety Information

To ensure safe use of this product, please adhere to the following guidelines:

  • Read All Instructions: Before assembly and use, carefully read and understand all instructions provided in this manual.
  • Two-Person Assembly: Assembly of this daybed requires two adults. Do not attempt to assemble alone.
  • Weight Limit: The upper bed has a weight limit of 400 pounds. The trundles are designed for lighter use. Do not exceed these limits.
  • Secure All Fasteners: Ensure all bolts, screws, and connectors are securely tightened before use. Periodically check and re-tighten as necessary.
  • Avoid Jumping: Do not jump on the daybed or trundles. This can cause structural damage and injury.
  • Proper Placement: Place the daybed on a flat, level surface.
  • Electrical Safety: When using the USB charging port and portable light, ensure they are connected to a suitable power source. Do not overload the USB port. Keep liquids away from electrical components.
  • Children Safety: Keep small parts and packaging materials away from children during assembly.

3. Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, contact customer support immediately.

  • Daybed Frame Components (Headboard, Footboard, Side Rails)
  • Trundle Frames (2 units)
  • Bed Slats (for main bed and both trundles)
  • Storage Cubby Panels
  • Portable LED Light with USB connection
  • USB Charging Module
  • Hardware Pack (screws, bolts, nuts, Allen wrench)
  • Assembly Instructions Manual

4. Setup and Assembly

Assembly is required for this product. It is recommended that two adults perform the assembly. Please follow the detailed step-by-step instructions provided in the separate assembly guide included in your package. Ensure you have ample space and all tools (typically an Allen wrench, provided) before starting.

Key Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
  2. Assemble Main Daybed Frame: Connect the headboard, footboard, and side rails using the provided hardware. Do not fully tighten bolts until all major frame components are aligned.
  3. Install Storage Cubbies: Attach the storage cubby panels to the back of the daybed frame as indicated in the assembly guide.
  4. Assemble Trundle Frames: Construct the two trundle frames, ensuring the wheels are correctly installed for smooth operation.
  5. Insert Slats: Place and secure the wooden slats onto the main daybed frame and both trundle frames. Ensure even spacing and secure attachment.
  6. Install USB Charging Module: Integrate the USB charging module into the designated slot within the storage cubby area.
  7. Attach Portable Light: Clip the portable LED light to the edge of the storage cubby or headboard, and connect its USB cable to the charging module.
  8. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws.
Detailed dimensions of the Polibi Twin XL Daybed and its trundles

Image 4.1: Dimensional diagram of the Polibi Twin XL Daybed, including the main bed, trundles, and storage cubbies. Refer to this for space planning.

Side view of the Polibi Twin XL Daybed frame showing assembly points

Image 4.2: Side view of the daybed frame, illustrating the structural connections and assembly points for the main frame and trundles.

5. Operating Instructions

5.1 Extending and Retracting Trundles

The Polibi Daybed features two pull-out trundles for additional sleeping space. To extend a trundle:

  1. Gently pull the trundle frame outwards from under the main daybed.
  2. The trundles are equipped with wheels for easy movement. Ensure the path is clear of obstructions.
  3. To retract, push the trundle back into its position under the main daybed until it is fully nested.
Polibi Twin XL Daybed with both trundles fully extended

Image 5.1: The daybed with both trundles extended, demonstrating the additional sleeping capacity.

Close-up of trundle wheels for smooth operation

Image 5.2: Detail of the trundle wheels, designed for easy and smooth extension and retraction.

5.2 Using the USB Charging Port

The integrated USB charging port allows you to conveniently charge your electronic devices.

  • Connect the daybed's power cord (if applicable, or ensure the USB module is powered) to a standard wall outlet.
  • Plug your device's USB charging cable into the USB port located in the storage cubby.
  • Ensure your device begins charging. If not, check connections and power source.
Close-up of the integrated USB charging port in the storage cubby

Image 5.3: A close-up view of the USB charging port, conveniently located within the storage cubby for easy access.

5.3 Operating the Portable Light

The portable LED light provides adjustable illumination for reading or other tasks.

  • The light is connected via a USB cable to the charging module. Ensure this connection is secure.
  • The light typically features a power button or touch sensor on its head or base to turn it on/off and adjust brightness. Refer to the light's specific instructions if provided.
  • The flexible arm allows you to direct the light as needed.
Close-up of the portable LED light clipped to the daybed

Image 5.4: A close-up of the portable LED light, showing its flexible arm and clip mechanism for attachment to the daybed's frame or cubby.

6. Maintenance

Proper maintenance will extend the life and appearance of your Polibi Daybed.

  • Cleaning: Wipe the daybed frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
  • Fastener Checks: Periodically (every 3-6 months) check all bolts, screws, and connections to ensure they are tight. Re-tighten as necessary to maintain structural integrity and prevent squeaking.
  • Trundle Wheels: Keep trundle wheels free of dust and debris to ensure smooth operation.
  • Electrical Components: Ensure the USB port and light connections are secure and free from damage. Do not attempt to repair electrical components yourself.

7. Troubleshooting

If you encounter issues with your Polibi Daybed, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Daybed is wobbly or squeaks.Loose fasteners; uneven floor.Check and tighten all bolts and screws. Ensure the daybed is on a level surface.
Trundle is difficult to pull out or push in.Obstruction; dirty wheels; misaligned frame.Clear any objects from the trundle's path. Clean trundle wheels. Verify trundle frame is assembled correctly and not warped.
USB charging port not working.No power to the daybed; loose connection; faulty cable/device.Ensure the daybed's power cord (if applicable) is plugged in. Check the USB module connection. Try a different USB cable or device to rule out external issues.
Portable light not turning on.Loose USB connection; light malfunction.Verify the light's USB cable is securely plugged into the charging module. Check if the charging module is powered. If issues persist, the light itself may be faulty.

8. Specifications

  • Brand: Polibi
  • Model: Twin XL Daybed
  • Color: White
  • Material: Solid Wood and MDF
  • Overall Product Dimensions (L x W x H): 81.9" x 129.7" x 35.5" (with trundles extended)
  • Upper Bed Dimensions: 79.9" x 39.9"
  • Middle Trundle Dimensions: 79.1" x 39.3"
  • Down Trundle Dimensions: 76.4" x 40.9"
  • Weight Limit: 400 Pounds (Upper Bed)
  • Included Components: Slat set, USB charging port, Portable LED light
  • Assembly Required: Yes
  • Mattress: Not included. No spring box needed.

9. Warranty and Support

For any questions, missing parts, or issues not covered in this manual, please contact Polibi customer support. Please have your purchase information and product model (Polibi Twin XL Daybed) ready when contacting support.

While specific warranty details are not provided in this manual, most Polibi products come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to your purchase documentation or contact customer service for detailed warranty terms and conditions.

Customer Support: Refer to your purchase platform or Polibi's official website for contact information.

Related Documents - Twin XL Daybed

Preview Assembly Instructions: Polibi Twin/Full Bunk Bed with Desk (WF290950, WF290951)
Comprehensive assembly guide for the Polibi Twin/Full Bunk Bed with Desk, featuring model numbers WF290950 and WF290951. Includes detailed safety warnings, a complete parts list, hardware inventory, and step-by-step visual instructions with textual descriptions.
Preview Assembly Instructions for Queen Size Upholstered Wood Platform Bed with Headboard and 2 Drawers
Step-by-step assembly instructions for a gray queen size upholstered wood platform bed with a headboard and two drawers. Includes safety warnings, part lists, hardware lists, and assembly steps.
Preview Assembly Instructions for WF197908/WF197909 Bunk Bed
Detailed assembly instructions for the WF197908/WF197909 bunk bed, including part lists, hardware details, and step-by-step guidance. Learn how to assemble your bunk bed safely and correctly.
Preview Twin Twin House Bunk Bed Assembly Instructions
Comprehensive assembly instructions for the Twin Twin House Bunk Bed, including safety warnings, parts list, hardware list, and step-by-step assembly diagrams with detailed textual descriptions.
Preview Assembly Instructions: King Size Platform Bed (SKU: WF283526)
Comprehensive assembly instructions for a King Size Solid Wood Platform Bed, including a detailed parts list, hardware specifications, and step-by-step visual guidance. Safety warnings and essential assembly tips are provided for a smooth setup.
Preview Polibi Loft Bed Assembly Instructions (WF301849/301850)
Detailed assembly instructions for the Polibi Loft Bed, model numbers WF301849 and WF301850. Includes safety warnings, parts list, hardware list, and step-by-step guidance for building the metal house bunk bed with slide and staircase.