Relx A Frame Sign Holder 61x91.4cm Instruction Manual

1. Product Overview

The Relx A Frame Sign Holder is a robust, double-sided display solution designed for outdoor use. Constructed from high-quality steel, it provides a stable platform for displaying posters or boards measuring 61 cm wide x 91.4 cm high (approximately 24 x 36 inches). Its design allows for easy poster changes and features non-slip feet for enhanced stability.

2. Setup and Assembly

The Relx A Frame Sign Holder requires minimal assembly. The frame is designed to be easily unfolded and secured for use.

2.1 Unfolding the Frame

Carefully unfold the A-frame structure until it forms a stable, inverted 'V' shape. Ensure the support bars are properly extended and locked into place to maintain the frame's rigidity.

Image: The bare A-frame sign holder, showing its structural components before poster insertion.

2.2 Dimensions and Stability

The frame's dimensions are approximately 61 cm (24.3 inches) wide at the base and 91.4 cm (36.2 inches) high for the display area. The overall height when set up is approximately 100.8 cm (39.7 inches). The 6.2 kg (14 lbs) steel construction and non-slip feet contribute to its windproof stability.

Image: Diagram illustrating the key dimensions of the A-frame sign holder, including width, height, and display area.

3. Operating Instructions

This sign holder is designed for easy and quick poster changes.

3.1 Inserting and Changing Posters

1. To insert or change a poster, gently lift the top cover of the frame.
2. Slide your 61 cm x 91.4 cm (24 x 36 inch) poster or board into the designated slot from the top.
3. Ensure the poster is fully seated within the frame.
4. Lower the top cover back into place to secure the poster.

Image: A hand demonstrating the slide-in design for easily changing posters by lifting the top lid.

3.2 Key Features

• Easy to Fold: The frame can be folded for compact storage and transport.
• Double-Sided Display: Allows for visibility from multiple directions.
• Easy Slide and Change: Quick poster replacement mechanism.
• Non-Slip Bottom: Equipped with pads on all four feet to prevent sliding.

Image: Visual representation of the key features: easy folding, double-sided design, simple poster change, and non-slip feet.

4. Maintenance

To ensure the longevity and optimal appearance of your Relx A Frame Sign Holder, follow these simple maintenance guidelines:

• Cleaning: Wipe the steel frame with a damp cloth and mild detergent as needed. Avoid abrasive cleaners that could damage the finish.
• Storage: When not in use, fold the frame and store it in a dry place to prevent rust and prolong its lifespan.
• Weather Resistance: The frame features a rain-tight design to protect your posters from moisture and is built to withstand windy conditions.

Image: Close-up view highlighting the rain-tight design of the frame, ensuring stability and protection in wet weather.

5. Troubleshooting

If you encounter any issues with your sign holder, consider the following:

• Instability: Ensure the frame is fully unfolded and the support bars are securely locked. Check that the non-slip feet are intact and making full contact with the ground.
• Difficulty Changing Posters: Verify that the top cover is fully lifted before attempting to slide posters in or out. Ensure posters are the correct size (61 cm x 91.4 cm) and not warped.

6. Specifications