Introduction
Thank you for choosing the Migipaws Touch Activated Flapping Chirping Lizard Kitten Toy. This interactive toy is designed to engage your cat's natural hunting instincts with realistic flapping, chirping, and wiggling movements. It features a rechargeable battery and is made from safe, durable materials. Please read this manual carefully to ensure proper use and enjoyment for your feline companion.
Setup
Package Contents
- 1 x Migipaws Flapping Chirping Lizard Toy
- 1 x USB Type-C Charging Cable
- 1 x Catnip Pouch
- 1 x Transparent Traceless Sticker Hook
Charging the Toy
The toy features a built-in rechargeable battery. Before first use, or when the toy's movements become sluggish, fully charge the device.
- Locate the Velcro opening on the underside of the lizard toy.
- Gently open the Velcro to access the internal mechanical module.
- Connect the included USB Type-C cable to the charging port on the module and plug the other end into a standard USB power adapter (not included).
- The indicator light on the module will show charging status (e.g., red for charging, green/off for fully charged).
- Once fully charged, disconnect the cable and securely close the Velcro opening.
Image: Hands connecting the USB-C charging cable to the toy's internal module for recharging.
Inserting Catnip
To enhance your cat's interest, you can insert the provided catnip pouch into the toy.
- Open the Velcro opening on the toy, similar to accessing the charging port.
- Place the catnip pouch inside the toy, next to the mechanical module.
- Securely close the Velcro opening.
Image: The Migipaws lizard toy with a visual representation of catnip, emphasizing its safe and durable materials.
Activating the Toy
After charging and inserting catnip (optional), the toy is ready for activation.
- Ensure the mechanical module is switched to the 'ON' position (usually a small switch near the charging port).
- Gently tap or pat the lizard toy. This touch activation will initiate its movements and sounds.
Image: A visual guide illustrating the four steps to set up and activate the lizard toy.
Operating Instructions
Interactive Play Modes
The Migipaws lizard toy is designed for various interactive play scenarios:
- On the Ground: Place the toy on the floor. When touched, it will flap, chirp, and wiggle, encouraging your cat to chase, pounce, and chew.
- Hanging Play: Use the transparent traceless sticker hook to hang the toy from a wall, door, or furniture. This allows for self-play, where your cat can bat at the toy as it dangles and activates.
- Wand Play: You can hold the toy or attach it to a cat wand (not included) to manually interact with your cat, simulating prey movement.
Image: A cat engaging with the lizard toy on the floor, demonstrating its interactive capabilities and showing how it can be hung.
Realistic Movement and Sound
The toy features a built-in smart device that produces realistic chirping sounds and moves its tail up and down to attract cats. These movements are designed to mimic natural prey, stimulating your cat's hunting instincts.
Image: The lizard toy demonstrating its realistic movements and sounds, with an inset showing the internal smart device.
Automatic Game Mode
The lizard cat toy operates in an automatic game mode:
- When touched, the toy will flap, chirp, and wiggle in irregularly slow or fast modes.
- The toy will automatically stop after approximately 25 seconds of activity.
- Your cat can reactivate the toy by touching it again, allowing for self-play even when you are busy.
Image: The lizard toy in automatic mode, illustrating its 25-second activity cycle after activation.
Maintenance
Cleaning Instructions
To keep the toy clean and hygienic for your cat:
- Before cleaning, ensure the mechanical module is switched off and removed from the toy.
- The plush exterior of the toy is washable. Hand wash gently with mild soap and water, or wipe with a damp cloth.
- Allow the plush to air dry completely before reinserting the mechanical module.
- Do not immerse the mechanical module in water. Wipe it clean with a dry cloth if necessary.
Battery Care
To prolong the life of the toy's rechargeable battery:
- Charge the toy fully before its first use.
- Avoid completely draining the battery frequently. Recharge when activity slows down.
- If storing the toy for an extended period, charge it to about 50% and store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Toy does not activate. | Battery is low or dead. Switch is off. | Charge the toy fully. Ensure the power switch on the module is in the 'ON' position. |
| Movements are weak or slow. | Low battery. | Recharge the toy. |
| Chirping sound is absent or faint. | Low battery. Sensor issue. | Recharge the toy. Ensure the module is correctly positioned and not obstructed. |
| Cat loses interest quickly. | Catnip needs refreshing. Cat is overstimulated or bored. | Add fresh catnip. Introduce the toy periodically rather than leaving it out constantly. Try different play methods (ground, hanging, wand). |
Specifications
- Model Number: MB-I1NP-4K7Q
- Product Dimensions: 22 x 11 x 3.99 cm (8.66 x 4.33 x 1.57 inches)
- Item Weight: 90.72 g (3.2 ounces)
- Material: Fur, Rubber, Silicone
- Color: Orange
- Battery: 1 Lithium Ion battery (rechargeable via USB Type-C)
- Manufacturer: Nanjing DM Technology Co.,LTD.
- Recommended Use: Exercise, Interactive Play
- Indoor/Outdoor Usage: Indoor
Warranty & Support
For any questions, concerns, or support regarding your Migipaws product, please refer to the seller's return policy or contact the manufacturer directly. Keep your purchase receipt for warranty claims.
Visit the official Migipaws Store for more products and information.
