1. Introduction
This manual provides detailed instructions for the safe and effective operation of your Hantek TO1152C Touch Screen Tablet Oscilloscope. The TO1152C is a versatile 2-channel handheld digital oscilloscope featuring a 150MHz bandwidth, 1GSa/s sample rate, and 8M memory depth. It integrates multiple functions including an oscilloscope, multimeter, signal generator, and spectrum analyzer, making it suitable for various testing and measurement applications.
Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Safety Information
Always observe the following safety precautions to avoid personal injury and prevent damage to the instrument or other connected devices:
- Power Source: Use only the specified power adapter and charging cables.
- Environment: Operate the device in a dry environment. Avoid exposure to moisture, extreme temperatures, or corrosive gases.
- Ventilation: Ensure adequate ventilation to prevent overheating.
- Probes and Cables: Use only probes and accessories supplied or recommended by Hantek. Ensure all connections are secure before operation.
- Servicing: Do not attempt to service the device yourself. Refer all servicing to qualified personnel.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- Hantek TO1152C Tablet Oscilloscope Unit
- Oscilloscope Probes (2 channels)
- Multimeter Test Leads
- USB Type-C Charging Cable
- Power Adapter (18W)
- User Manual (this document)
4. Product Overview
The Hantek TO1152C is designed for portability and durability, featuring a robust casing and a multi-touch screen for intuitive operation.
Figure 4.1: Front view of the Hantek TO1152C Tablet Oscilloscope, showing the touch screen interface and side buttons.
4.1 Key Features
- 2-Channel Digital Oscilloscope: 150MHz bandwidth, 1GSa/s real-time sample rate, 8M memory depth.
- Integrated Functions: Oscilloscope, Multimeter, Signal Generator, and Spectrum Analyzer.
- Multi-Touch Screen: 800x480 resolution for clear waveform display and easy navigation.
- Portable Design: Thin, lightweight, anti-fall, and shock-resistant with a unique suspension stand for hands-free use.
- Long Battery Life: Built-in large capacity battery with Type-C fast charging support.
Figure 4.2: Display illustrating the multiple integrated functions of the Hantek TO1152C, including digital storage oscilloscope, arbitrary function signal generator, high-precision multimeter, data recorder, FFT spectrum analyzer, and frequency meter.
Figure 4.3: The Hantek TO1152C shown with its integrated suspension foot, allowing for hands-free placement on various surfaces.
4.2 Device Layout
Figure 4.4: Detailed view of the Hantek TO1152C's ports and connectors, including V/Ω/C Diode Jack, COM Jack, mA Jack, A Jack, Power supply, USB connector, Signal source output port, and 2 oscilloscope channels.
The device features clearly labeled ports for oscilloscope probes, multimeter leads, signal generator output, and a USB Type-C port for charging and data transfer. The robust design ensures durability in various working conditions.
Figure 4.5: Image highlighting the anti-falling and anti-seismic sturdy and durable construction of the Hantek TO1152C.
5. Setup
5.1 Initial Charging
Before first use, fully charge the device. Connect the provided USB Type-C cable to the device's charging port and the power adapter. Plug the adapter into a suitable power outlet. The charging indicator will show the charging status.
Figure 5.1: Illustration of the Hantek TO1152C's internal battery and Type-C charging port, emphasizing its high power and long endurance capabilities.
5.2 Powering On/Off
- Power On: Press and hold the power button located on the side of the device until the screen illuminates.
- Power Off: Press and hold the power button until a shutdown prompt appears on the screen, then confirm.
5.3 Connecting Probes and Leads
- Oscilloscope Probes: Connect the oscilloscope probes to the BNC connectors labeled CH1 and CH2. Ensure a secure connection by twisting the connector until it locks.
- Multimeter Leads: For multimeter functions, connect the test leads to the appropriate input jacks (V/Ω/C Diode, COM, mA, A) as indicated on the device.
- Signal Generator: If using the signal generator function, connect the output cable to the designated signal source output port.
6. Operating Instructions
The Hantek TO1152C features a user-friendly multi-touch interface for easy navigation and control.
Figure 6.1: A hand interacting with the multi-touch large screen of the Hantek TO1152C, demonstrating its high resolution of 800x480 pixels.
6.1 Oscilloscope Function
From the main menu, tap the 'OSC' icon to enter oscilloscope mode. Here you can adjust settings such as vertical scale (Volts/Div), horizontal time base (Sec/Div), trigger level, and coupling (AC/DC/GND). The 150MHz bandwidth and 1GSa/s sample rate provide accurate waveform capture.
6.2 Multimeter Function
Select the 'DMM' icon for multimeter operations. The device supports measurements for AC/DC voltage, current, resistance, capacitance, and diode/continuity tests. Ensure correct lead connections for each measurement type.
6.3 Signal Generator Function
Access the 'AFG' (Arbitrary Function Generator) icon to utilize the built-in signal generator. This allows you to generate various waveforms (sine, square, ramp, pulse) with adjustable frequency, amplitude, and offset. This feature is available on models TO1152D, TO1202D, TO1252D, TO1154D, TO1204D, TO1254D. The TO1152C model does not include this function.
Figure 6.2: Display showing the 2-channel handheld oscilloscope capabilities and digital multimeter functions. Note that the arbitrary function signal generator is specific to 'D' models.
6.4 Data Recording and Storage
The device supports data recording and storage, allowing you to save waveforms and measurement data. Use the 'Save' function on the screen or dedicated buttons for quick storage. Data can be analyzed directly on the device or transferred via USB.
6.5 Automotive Inspection Demonstration
The Hantek TO1152C can be used for various automotive diagnostic tasks. The following video demonstrates its application in automotive inspection, showcasing how to connect and interpret data for vehicle diagnostics.
Video 6.1: Demonstration of the Hantek TO1000 Series (including TO1152C) in an automotive inspection scenario, highlighting its use as a digital oscilloscope and signal generator for vehicle diagnostics. This video is provided by Xin Tester Tools Factory Store.
7. Maintenance
7.1 Cleaning
Regularly clean the device's exterior with a soft, dry cloth. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Avoid abrasive cleaners or solvents that could damage the casing or screen.
7.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, ensure the battery is charged to approximately 50-70% and store in a cool, dry place.
7.3 Storage
Store the oscilloscope in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity. Use the original packaging or a protective case to prevent physical damage.
8. Troubleshooting
If you encounter issues with your Hantek TO1152C, refer to the following common problems and solutions:
- Device does not power on: Ensure the battery is charged. Connect the charger and attempt to power on again. If the issue persists, contact support.
- No waveform displayed: Check probe connections. Ensure the input signal is within the device's measurement range. Adjust vertical and horizontal settings. Verify trigger settings.
- Inaccurate measurements: Calibrate probes if necessary. Ensure correct measurement mode and lead connections for multimeter functions.
- Touch screen unresponsive: Restart the device. If the problem continues, contact support.
9. Specifications
Key technical specifications for the Hantek TO1152C:
Figure 9.1: Table detailing functional parameters for the Hantek TO1000 Series, including channel count, bandwidth, sample rate, memory depth, AFG (Arbitrary Function Generator) availability, and multimeter functionality across various models.
- Number of Channels: 2 channels
- Bandwidth: 150 MHz
- Sample Rate: 1 GSa/s
- Memory Depth: 8M
- AFG (Arbitrary Function Generator): No (available on 'D' models)
- Multimeter: Yes
- Display: Multi-touch screen, 800 x 480 resolution
- Battery: 1 Lithium Ion battery (included)
- Charging: Type-C, 18W fast charging
- Country of Origin: China
10. Warranty and Support
Hantek products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Hantek website. Keep your purchase receipt as proof of purchase.
For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Hantek dealer or the Hantek customer service department. Contact details can typically be found on the Hantek website or in your product documentation.
