Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your OLEVS Men Analog Quartz Waterproof Watch. Please read this manual carefully to ensure proper use and longevity of your timepiece.
Image: Front view of the OLEVS Men Analog Quartz Waterproof Watch, showcasing its blue dial, chronograph sub-dials, moon phase indicator, and black silicone strap.
Setup
Setting the Time
- Pull the crown (main knob on the side of the watch) out to the second gear position.
- Rotate the crown to adjust the hour and minute hands to the correct time. Ensure to account for AM/PM if setting the date later.
- Once the time is set, push the crown back into the normal position (first gear) to start the watch movement.
Setting the Date
- Pull the crown out to the first gear position.
- Rotate the crown to adjust the date in the calendar window.
- Once the date is set, push the crown back into the normal position.
Image: A detailed diagram illustrating the crown positions for adjusting the calendar (1st gear) and time (2nd gear), along with the locations of the second hand chronograph button and reset stopwatch button.
Adjusting the Silicone Strap
The high-quality silicone strap is designed for comfort and durability. To adjust the strap, simply use the pin buckle to find your desired fit. No complicated disassembly is required.
Image: A close-up view of the comfortable and breathable black silicone strap, highlighting its texture and the pin buckle mechanism.
Operating the Watch
Chronograph Functions
Your OLEVS watch features a multi-functional chronograph. The three sub-dials indicate chronograph minutes, seconds, and a 24-hour display.
- Starting/Stopping the Chronograph: Press the second hand chronograph button (top button) to start and stop the chronograph.
- Resetting the Chronograph: Press the reset stopwatch button (bottom button) to reset the chronograph hands to zero.
Moon Phase Display
The watch includes a moon phase sub-dial, which visually represents the current phase of the moon. This display operates automatically once the time is correctly set.
Maintenance and Care
Water Resistance
This watch is water resistant up to 30 meters (3ATM), making it suitable for daily splashing and brief immersion in water. It is important to note that all watches cannot be bathed in hot water, as steam can penetrate the seals and damage the internal movement. Avoid pressing buttons or pulling the crown while the watch is wet.
Image: The OLEVS watch shown with water splashing, indicating its 30-meter water resistance suitable for daily activities.
Luminous Function
The watch features luminous hands, which utilize imported fluorescent powder to allow for easy time reading in low-light conditions or at night. For optimal luminescence, expose the watch to a light source before entering dark environments.
Image: The watch face in a dark setting, with its hands and hour markers glowing, illustrating the luminous function for visibility at night.
General Care
- Clean the watch regularly with a soft, dry cloth to remove dust and smudges.
- Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Keep the watch away from strong magnetic fields, as these can affect the accuracy of the quartz movement.
- The watch crystal is made of high-hardness coated glass, providing scratch and wear resistance. However, avoid direct impact to prevent damage.
Troubleshooting
If you encounter any issues with your OLEVS watch, please refer to the table below for common problems and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not keeping accurate time. | Low battery, exposure to strong magnetic fields. | Replace battery (consult a professional), keep away from magnets. |
| Chronograph hands not resetting to zero. | Needs calibration. | Refer to the operating section for resetting instructions. If issue persists, seek professional service. |
| Condensation under the crystal. | Exposure to extreme temperature changes or water ingress. | Immediately take the watch to a professional watchmaker for inspection and drying to prevent internal damage. |
| Date not changing at midnight. | Time set incorrectly (AM/PM). | Adjust the time by 12 hours. |
Specifications
- Model Number: OL-S-2875J-BL
- Movement: Imported Japanese Quartz Movement
- Display Type: Analog
- Case Material: Stainless Steel
- Band Material: High-Quality Silicone Rubber
- Clasp Type: Buckle
- Water Resistance: 30M (3ATM) - Suitable for daily splashing, not for hot water bathing or diving.
- Crystal: High-Hardness Coated Glass (Scratch and wear resistant)
- Functions: Chronograph (minutes, seconds), 24-hour display, Moon Phase, Date Window, Luminous Hands
- Package Dimensions: 5.87 x 2.56 x 1.06 inches
- Item Weight: 3.84 ounces
- Department: Mens
- Manufacturer: OLEVS
Image: The reverse side of the OLEVS watch, displaying the engraved case back with details such as 'Chronograph Movement', 'Stainless Steel', and 'Water 3ATM'.
Warranty and Support
OLEVS watches are manufactured with attention to quality and detail. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact OLEVS customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance or inquiries not covered in this manual, please visit the official OLEVS website or contact their customer service department.