Puig 21089N Aluminum Chassis Covers Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation and maintenance of your Puig 21089N Aluminum Chassis Covers. These covers are designed to enhance the aesthetic of your motorcycle by concealing chassis openings and to protect against the accumulation of dirt and water.

Manufactured by Puig, these chassis covers are precision-machined from a single block of aluminum and feature a durable black anodized finish with laser-engraved logos. Their model-specific design ensures an optimal and secure fit, minimizing movement and vibrations.

2. Package Contents

Verify that all components are present before beginning installation.

• Puig 21089N Aluminum Chassis Covers (Set)
• Required mounting hardware (if applicable, typically pre-attached or integrated)

Note: An Allen key is the only tool required for installation and removal.

3. Installation Guide

The installation process is designed to be quick and straightforward. Ensure your motorcycle is stable and turned off before proceeding.

1. Identify Mounting Points: Locate the open chassis holes on your motorcycle where the covers are to be installed. These covers are model-specific, ensuring a precise fit.
2. Prepare the Area: Clean any dirt or debris from around the chassis openings to ensure a secure and flush fit.
3. Position the Cover: Align one of the Puig 21089N Aluminum Chassis Covers with the corresponding chassis opening.
4. Secure the Cover: Using an Allen key, gently insert and tighten the integrated fastening mechanism until the cover is firmly in place. Do not overtighten to avoid damaging the cover or the motorcycle chassis.
5. Repeat for all Covers: Follow steps 3 and 4 for all remaining chassis covers.
6. Final Check: After installation, visually inspect all covers to ensure they are securely fastened and properly aligned.

Image 1: Puig 21089N Aluminum Chassis Cover installed on the left side of a motorcycle engine, showing a black cover with a subtle logo.

Image 2: Puig 21089N Aluminum Chassis Cover installed on the right side of a motorcycle engine, showing a black cover with a subtle logo.

4. Operation

The Puig 21089N Aluminum Chassis Covers are passive components designed to protect and enhance the appearance of your motorcycle. No active operation is required after proper installation.

5. Maintenance

To ensure the longevity and appearance of your chassis covers:

• Cleaning: Clean the covers regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the anodized finish.
• Inspection: Periodically check the covers for any signs of loosening or damage. If a cover appears loose, gently retighten it with an Allen key.
• Protection: While designed for durability, avoid direct impact or harsh chemicals to maintain the finish.

6. Troubleshooting

These chassis covers are simple components with minimal troubleshooting requirements. If you encounter issues:

• Cover is Loose: Ensure the fastening mechanism is fully tightened with an Allen key. Do not overtighten.
• Cover Does Not Fit: Verify that the Puig 21089N model is compatible with your specific motorcycle model. Compatibility information can typically be found in the product description or on the manufacturer's website.
• Damage to Finish: Minor scratches can sometimes be buffed out with specialized aluminum polish. For significant damage, replacement may be necessary.

7. Specifications

8. Warranty Information

Specific warranty details for the Puig 21089N Aluminum Chassis Covers are not provided in the product information. Please refer to the official Puig website or contact your retailer for warranty terms and conditions.

9. Support

For further assistance or inquiries regarding the Puig 21089N Aluminum Chassis Covers, please visit the official Puig website or contact their customer support. You can also reach out to the retailer from whom you purchased the product.

Puig Official Website: www.puig.tv