ZTE E1320

ZTE Polar E1320 AX3000 WI-FI 6 Wireless Router User Manual

Model: E1320

Introduction

Welcome and thank you for choosing the ZTE Polar E1320 AX3000 WI-FI 6 Wireless Router. This manual provides essential instructions for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance and a reliable network connection.

Package Contents

  • ZTE Polar E1320 AX3000 WI-FI 6 Wireless Router
  • Power Adapter
  • Ethernet Cable
  • Quick Start Guide (This manual serves as the detailed guide)

Product Overview

Front Panel

Front view of the ZTE Polar E1320 router

This image displays the front of the ZTE Polar E1320 router, featuring the ZTE logo on the left, a status indicator light in the center, and the "WiFi 6" logo on the right. The four external antennas are shown in an upright position.

The front panel includes a status indicator light. Refer to the Quick Start Guide for specific indicator light meanings (e.g., power, internet connection status).

Rear Panel (Ports and Buttons)

Rear view of the ZTE Polar E1320 router showing ports

This image shows the rear panel of the ZTE Polar E1320 router, highlighting its various ports and buttons. From left to right, it features a WAN port, three LAN ports (LAN1, LAN2, LAN3), a Reset/Mesh/WPS button, and a Power input. The four external antennas are also visible.

  • WAN Port: Connects to your modem or internet service provider's (ISP) network.
  • LAN Ports (LAN1, LAN2, LAN3): Connects to wired devices such as computers, gaming consoles, or smart TVs.
  • RESET/MESH/WPS Button:
    • Reset: Press and hold for approximately 10 seconds to restore factory default settings.
    • Mesh: Short press to initiate Mesh pairing with compatible ZTE routers.
    • WPS: Short press to enable Wi-Fi Protected Setup for easy device connection.
  • POWER Input: Connects to the provided power adapter.

Setup Instructions

Step 1: Connect the Hardware

  1. Power off your modem (if applicable).
  2. Connect one end of the Ethernet cable to the WAN port on your ZTE E1320 router.
  3. Connect the other end of the Ethernet cable to your modem's LAN port.
  4. Connect the power adapter to the POWER input on the router and plug it into a power outlet.
  5. Power on your modem, then power on your ZTE E1320 router.
  6. Wait for the router's indicator lights to stabilize, indicating a successful connection.

Step 2: Connect to the Wi-Fi Network

Locate the Wi-Fi network name (SSID) and password printed on the label at the bottom of your router.

On your computer or mobile device, select the router's SSID from the list of available Wi-Fi networks and enter the password.

Step 3: Access the Web Management Interface

Open a web browser (e.g., Chrome, Firefox) and enter the default IP address (usually 192.168.1.1 or 192.168.0.1) into the address bar. Refer to the router's label for the exact address.

Enter the default username and password (usually admin/admin or found on the router label) to log in.

Follow the on-screen instructions for initial setup, including changing the default Wi-Fi name and password for security.

Operating Instructions

Wi-Fi Connectivity

The ZTE E1320 supports Wi-Fi 6 (802.11ax) for faster speeds and improved efficiency. It operates on a Dual-Band frequency (2.4GHz and 5GHz).

Image showing WiFi 6 logo and router with foldable antennas

This image highlights the router's support for WiFi 6 technology and its design featuring four external antennas that can fold 180 degrees and rotate 360 degrees for optimal signal positioning.

Zlife Lite App Management

Manage your network settings conveniently using the Zlife Lite app, available for iOS and Android devices.

Screenshot of the Zlife Lite app interface

This image displays screenshots of the Zlife Lite mobile application interface, illustrating various network management features such as router configuration, network topology, parental control, Wi-Fi settings, blacklist management, and network optimization.

The app allows for:

  • Router Configuration
  • Network Topology View
  • Parental Control
  • Wi-Fi Configuration
  • Blacklist Management
  • Network Optimization

EasyMesh Functionality

The ZTE E1320 supports EasyMesh, allowing you to create a seamless mesh Wi-Fi network with compatible devices for extended coverage and transparent roaming.

Diagram illustrating EasyMesh network coverage

This diagram illustrates the EasyMesh feature, showing how multiple routers (including the ZTE E1320) can work together to provide comprehensive Wi-Fi coverage throughout a home, eliminating dead zones with a 'Plug and Play' solution established in 30 seconds.

Maintenance

  • Keep the router in a well-ventilated area to prevent overheating.
  • Avoid placing the router near sources of interference (e.g., microwaves, cordless phones).
  • Regularly check for and install firmware updates through the web management interface or Zlife Lite app for improved performance and security.
  • Periodically restart the router to refresh its performance.

Troubleshooting

No Internet Connection

  • Check if your modem is working correctly.
  • Ensure all cables are securely connected to the WAN and LAN ports.
  • Restart both your modem and router.
  • Verify your internet settings in the router's web management interface.

Weak Wi-Fi Signal

  • Reposition the router to a central location, away from obstructions.
  • Adjust the router's antennas for optimal signal direction.
  • Consider using the EasyMesh feature with another compatible router to extend coverage.
  • Check for interference from other electronic devices.

Cannot Access Web Management Interface

  • Ensure your device is connected to the router's Wi-Fi or via an Ethernet cable.
  • Verify the IP address entered in the browser is correct (e.g., 192.168.1.1).
  • Try clearing your browser's cache or using a different browser.
  • If you forgot the password, perform a factory reset using the RESET button.

Specifications

  • Brand: ZTE
  • Model Name: E1320
  • Wireless Standard: 802.11ax (Wi-Fi 6)
  • Frequency Band Class: Dual-Band
  • Special Feature: Wireless
  • Connectivity Technology: Wi-Fi
  • Product Dimensions: 50 x 50 x 28 cm
  • Item Weight: 300 g
  • Compatible Devices: Laptop, Personal Computer, Smart Television, Tablet
  • Included Components: Router

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ZTE website.

You can also contact ZTE customer service for assistance with your ZTE Polar E1320 AX3000 WI-FI 6 Wireless Router.

Related Documents - E1320

Preview ZTE E1320 Wireless Router: FCC Statement and Setup Guide
Official FCC compliance information and step-by-step setup instructions for the ZTE E1320 wireless router, including visual descriptions of setup steps.
Preview ZTE E1320 Wi-Fi6 Wireless Router User Manual
User manual for the ZTE E1320 Wi-Fi6 Wireless Router, covering installation, setup using the ZLife Lite app, mesh network configuration, troubleshooting, and FAQs.
Preview ZTE MF289F 4G CPE Quick Start Guide and User Manual
Get started with your ZTE MF289F 4G CPE. This guide covers setup, Wi-Fi, Mesh networking, telephone functions, troubleshooting, and safety information for the ZTE MF289F device.
Preview ZTE MF65M Wi-Fi Router: Guida Rapida e Configurazione
Guida rapida completa per il router Wi-Fi ZTE MF65M. Include istruzioni dettagliate per la configurazione, connessione, uso, sicurezza e risoluzione problemi.
Preview ZTE H298A Router Admin Manual | Hyperoptic
This is the admin manual for the ZTE H298A router provided by Hyperoptic. It covers router login, network configuration, Wi-Fi settings, security features, and advanced settings like port forwarding and DDNS.
Preview Ръководство за потребителя на 5G рутер ZTE MC888 от VIVACOM
Това ръководство предоставя подробна информация за настройка, свързване, използване и отстраняване на проблеми с 5G рутер ZTE MC888, предоставен от VIVACOM.