1. Introduction
Thank you for choosing the Plumb Tech BHS100 Industrial-Grade Dual-Purpose Synthetic Rubber Hose. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new hose. Please read these instructions carefully before use and retain them for future reference.
Image 1.1: Plumb Tech BHS100 hose in retail packaging.
2. Safety Information
- Always ensure connections are secure to prevent leaks and potential water damage.
- Do not use this hose with water temperatures exceeding 266°F (130°C) or below -76°F (-60°C).
- Avoid dragging the hose over sharp objects or abrasive surfaces to prevent damage.
- When not in use, release water pressure from the hose before storing.
- This hose is certified BPA-free and lead-free, making it safe for drinking water applications.
Image 2.1: Certification for Lead-Free and Drinking Water Safe.
3. Product Features
The Plumb Tech BHS100 hose is engineered for durability and versatility, suitable for various heavy-duty watering applications.
- Drinking Water Safe: BPA-free and lead-free construction ensures clean water delivery.
- Lightweight & Kink-Resistant: Over 50% lighter than traditional rubber hoses, designed to resist kinking for ease of use.
- High Tensile Strength: 6 times stronger than standard rubber hoses, with a 150 PSI working pressure and 500 PSI burst pressure.
- 3-Ply Durable Construction: Features a premium synthetic rubber tubing, reinforced polyester interlayer, and an outer layer of premium synthetic rubber.
- Durable Fittings: Equipped with 3/4" aluminum male and female crush-proof fittings and hose bend restrictors to minimize stress at connection points.
- All-Weather Flexibility: Maintains flexibility in temperatures as low as -76°F (-60°C) and is rated for hot water up to 266°F (130°C).
Image 3.1: Detailed view of the hose material and fittings.
4. Setup
- Uncoil the Hose: Carefully uncoil the entire length of the hose to prevent kinks during initial use.
- Connect to Water Source: Attach the female end of the hose to your water spigot or faucet. Ensure the connection is hand-tight to prevent leaks. Do not overtighten.
- Attach Nozzle/Accessory (Optional): If using a nozzle, sprinkler, or other watering accessory, attach it to the male end of the hose. Ensure a secure connection.
- Check for Leaks: Slowly turn on the water supply and inspect all connections for any leaks. Tighten connections slightly if necessary.
Image 4.1: Hose fittings for secure attachment.
5. Operating Instructions
The Plumb Tech BHS100 hose is designed for versatile use in various environments.
- General Watering: Use for garden watering, lawn care, washing vehicles, or general outdoor cleaning.
- Drinking Water Applications: Due to its BPA-free and lead-free composition, this hose is suitable for filling RVs, boats, or other potable water needs.
- Industrial Use: Its robust construction makes it ideal for heavy-duty projects requiring a durable and reliable water supply.
- Temperature Range: The hose maintains flexibility and performance across a wide temperature range, from extreme cold to hot water applications.
Image 5.1: Hose in use for garden watering.
6. Maintenance
- Cleaning: Rinse the hose with clean water after each use, especially if used with chemicals or in dirty environments.
- Storage: Store the hose coiled in a cool, dry place away from direct sunlight when not in use. Avoid storing in areas where it could be exposed to sharp objects or heavy loads.
- Winterization: Before freezing temperatures, drain all water from the hose and store it indoors to prevent ice damage.
- Inspection: Periodically inspect the hose for any signs of wear, cuts, or damage to the fittings. Replace if significant damage is observed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaking from connections | Loose connection, worn washer | Tighten connections by hand. Replace rubber washers if damaged. |
| Reduced water flow | Kink in hose, debris in nozzle/faucet, partially closed spigot | Straighten hose, clean nozzle/faucet screen, ensure spigot is fully open. |
| Hose appears stiff or brittle | Extreme cold exposure, prolonged sun exposure | Allow hose to warm up. Store in a shaded area when not in use. |
8. Specifications
- Model: BHS100
- Brand: Plumb Tech
- Material: 100% Synthetic Rubber
- Diameter: 5/8 inches
- Length: 100 feet
- Working Pressure: 150 PSI
- Burst Pressure: 500 PSI
- Temperature Range: -76°F (-60°C) to 266°F (130°C)
- Fittings: 3/4" Aluminum, Crush-Proof
- Certifications: BPA-Free, Lead-Free, Drinking Water Safe
- Item Weight: Approximately 12.87 pounds
- Product Dimensions: 14 x 28 x 39 inches (packaged)
9. Warranty and Support
The Plumb Tech BHS100 hose comes with a limited lifetime warranty, as indicated on the product packaging. For specific warranty details, claims, or technical support, please refer to the contact information provided on the product packaging or visit the official Plumb Tech website.
Plumb Tech is a brand committed to providing durable and reliable plumbing supplies and accessories. For further assistance, please contact our customer service department.
