CorLiving Brisbane Outdoor Patio Corner Sectional Piece User Manual

Introduction

Thank you for choosing the CorLiving Brisbane Outdoor Patio Corner Sectional Piece. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.

Image: The CorLiving Brisbane Outdoor Patio Corner Sectional Piece, shown as part of a larger sectional arrangement in an outdoor patio setting.

Safety Information

• Always assemble the product on a soft, non-abrasive surface to prevent damage.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand or jump on the furniture.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• This product is designed for outdoor use. Protect from extreme weather conditions to prolong its lifespan.
• Maximum weight recommendation: 149.69 kg (330 lbs).

Package Contents

Before beginning assembly, ensure all parts listed below are present. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Corner Sectional Frame (Resin Wicker and Steel)
• Seat Cushion (Light Grey)
• Back Cushion (Light Grey)
• Assembly Hardware (bolts, washers, Allen key)
• Assembly Guide

Setup and Assembly

Assembly is required for this product. Please follow these steps carefully.

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, soft surface like a carpet or blanket to prevent scratches.
2. Identify Parts: Refer to the included assembly guide to identify each component and hardware piece.
3. Assemble Frame: Connect the frame sections using the provided hardware. Do not fully tighten bolts until all sections are loosely assembled.
4. Tighten Hardware: Once all frame sections are in place, gradually tighten all bolts evenly. Do not overtighten.
5. Attach Cushions: Place the seat cushion onto the frame, followed by the back cushion. Ensure they are properly aligned.
6. Adjust Leveling Feet: The sectional piece includes adjustable feet. Adjust them as needed to ensure the unit is stable and level on uneven surfaces.

Image: A close-up side view of the assembled CorLiving Brisbane Corner Sectional Piece, highlighting the distressed charcoal grey wicker and light grey cushions.

Operating Instructions

The CorLiving Brisbane Corner Sectional Piece is designed to be a modular component of the Brisbane Outdoor Sectional Collection. It changes the direction of the sectional, allowing for various configurations such as L-Shape, V-Shape, or U-Shape layouts.

• Modular Use: This corner piece is an essential component for building larger sectional arrangements. It is not intended for standalone use.
• Placement: Position the sectional piece on a hard, level surface in your outdoor living area.
• Comfort: The plush, generously padded, weather-resistant cushions provide comfort for lounging.

Image: A close-up front view of the CorLiving Brisbane Corner Sectional Piece, showcasing the texture of the wicker and the comfort of the cushions.

Maintenance

Proper care and maintenance will extend the life and appearance of your outdoor sectional piece.

• Frame Care: Wipe the resin wicker and steel frame clean with a damp cloth and mild soap. Rinse thoroughly and dry completely. Avoid harsh chemicals or abrasive cleaners.
• Cushion Care: Spot clean cushions with a mild soap solution and a soft brush. Allow to air dry completely. Do not machine wash or tumble dry. Store cushions indoors during inclement weather or prolonged periods of non-use to prevent fading and mildew.
• Winter Storage: During winter months or extended periods of non-use, it is recommended to cover the furniture or store it in a dry, protected area to prevent damage from extreme temperatures and moisture.

Image: A detailed close-up of the light grey cushion fabric, showing its texture and stitching.

Troubleshooting

If you encounter any issues with your CorLiving Brisbane Corner Sectional Piece, refer to the following common solutions:

• Wobbling/Unstable: Check that all assembly bolts are securely tightened. Adjust the leveling feet on the bottom of the unit to stabilize it on uneven surfaces.
• Cushion Discoloration/Mildew: Ensure cushions are stored in a dry place when not in use or during rain. Clean any mildew immediately with a mild bleach solution (test on an inconspicuous area first) and rinse thoroughly.
• Wicker Damage: Minor wicker damage can sometimes be repaired with a suitable outdoor adhesive. For significant damage, contact customer support.

Specifications

Image: A technical line drawing illustrating the detailed dimensions of the CorLiving Brisbane Corner Sectional Piece in both centimeters and inches.

Warranty Information

This CorLiving product comes with a 6-month warranty against manufacturer defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Customer Support

For assistance with assembly, missing parts, or any other inquiries regarding your CorLiving Brisbane Outdoor Patio Corner Sectional Piece, please contact CorLiving customer support:

• Manufacturer: CorLiving
• Address: 2252 190th Street, Surrey, BC Canada
• Please visit the official CorLiving website for contact details or to submit a support request.