Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Maximum Weight Capacity: Do not exceed the recommended weight limit for the bed.
- Fall Hazard: Ensure all guardrails are properly installed and secured. Do not allow children under 6 years of age on the upper bunk.
- Assembly: Two or more adults are recommended for assembly. Ensure all hardware is tightened securely before use. Periodically check and re-tighten hardware.
- Ventilation: Ensure adequate ventilation around the bed.
- Mattress Requirements: Use only mattresses that meet the specified dimensions and thickness to ensure proper guardrail height.
- No Horseplay: Prohibit horseplay on or under the bed.
- Ladder Safety: Always use the ladder for entering and exiting the upper bunk.
Product Overview and Dimensions
The Polibi Full Size Loft Bed provides an elevated sleeping area, an integrated desk, and a two-drawer cabinet, optimizing space in your room. Review the overall dimensions before assembly to ensure proper placement.
Parts List
Before beginning assembly, carefully unpack all components and identify each part using the list below. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Bed Posts (4)
- Side Rails (2 long, 2 short)
- Guardrails (2)
- Bed Slats (approx. 14-16 pieces)
- Ladder (1)
- Desk Top (1)
- Desk Support Rails (various)
- Writing Board/Back Panel (1)
- 2-Drawer Cabinet (pre-assembled or assembly required for drawers/shelves)
- Cabinet Shelves (2)
Hardware List
Ensure all hardware components are present before starting assembly. Use the provided Allen wrench for most fasteners.
- Long Bolts (various sizes)
- Short Bolts (various sizes)
- Barrel Nuts
- Wood Screws (for slats)
- Allen Wrench (1)
- Washers (if included)
Assembly Instructions
Follow these steps carefully. Do not fully tighten bolts until instructed, or until the entire section is assembled.
- Prepare the Area: Clear a spacious area for assembly. Lay out all parts and hardware on a soft, clean surface to prevent scratches.
- Assemble Bed End Frames: Attach the short side rails to two bed posts using the appropriate bolts and barrel nuts. Repeat for the other end frame. Do not fully tighten yet.
- Connect Side Rails: Connect the two assembled end frames using the long side rails. Ensure the bed frame is square before gently tightening all bolts on the main bed frame.
- Install Bed Slats: Place the bed slats evenly across the bed frame. Secure each slat to the side rails using the provided wood screws. Ensure slats are firmly attached to provide a stable mattress foundation.
Figure 4: Proper installation of bed slats for mattress support. - Attach Guardrails: Secure the guardrails to the upper bed frame using the designated bolts. Ensure they are firmly attached to prevent falls.
Figure 5: Guardrails must be securely fastened for safety. - Assemble and Install Desk: Attach the desk support rails to the bed posts at the desired height. Place the desk top onto the supports and secure it. Install the writing board/back panel behind the desk.
Figure 6: The writing board provides a back panel for the desk area. - Position Cabinet: Place the two-drawer cabinet under the desk area as desired. Ensure it is stable and does not obstruct movement.
- Attach Ladder: Securely attach the ladder to the designated side of the bed frame. Ensure all ladder steps are firmly in place and the ladder is stable.
Figure 7: The ladder provides safe access to the loft bed. - Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.
- Final Inspection: Double-check all connections for tightness and stability. Ensure there are no loose parts or sharp edges.
Operating Instructions
The Polibi Full Size Loft Bed is designed for versatile use, combining a sleeping area with a functional workspace and storage.
- Using the Loft Bed: Access the upper bunk using the integrated ladder. Ensure the mattress fits snugly within the bed frame and below the top edge of the guardrails.
- Using the Desk: The spacious desk area can be used for studying, working, or creative activities. Ensure proper lighting and ergonomic setup for prolonged use.
- Using the Cabinet: The two-shelf cabinet provides convenient storage for books, supplies, or personal items. Place heavier items on the bottom shelf for stability.
Maintenance and Care
Proper care will extend the life and appearance of your Polibi Loft Bed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
- Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Avoid Moisture: Protect the wood from excessive moisture and direct sunlight to prevent warping or fading.
- Weight Distribution: Distribute weight evenly on the bed and shelves to prevent stress on the frame.
Troubleshooting
If you encounter issues with your loft bed, refer to these common solutions.
- Bed Feels Wobbly: Check all bolts and screws. Ensure they are fully tightened. If the bed is on an uneven surface, try repositioning or adding shims under the legs.
- Parts Don't Align: Loosen all bolts slightly, adjust the parts into alignment, and then re-tighten. Sometimes, parts need to be loosely assembled before final tightening.
- Squeaking Noises: Squeaking often indicates loose hardware. Identify the source of the squeak and tighten the corresponding bolts. Applying a small amount of wax or lubricant to contact points can also help.
- Missing Hardware/Parts: Do not attempt to substitute parts. Contact customer support immediately for replacements.
Product Specifications
| Brand | Polibi |
| Model | Full Loft Bed with Desk and 2-Drawer Cabinet |
| ASIN | B0BYNFGDYW |
| Size | Full |
| Product Dimensions | 78.9"L x 57"W x 69.3"H |
| Material | Wood (Pinewood frame) |
| Color | Espresso |
| Special Feature | Flexible, Sturdy, Built-in Desk, 2-Drawer Cabinet, Writing Board |
| Assembly Required | Yes |
| Mattress Included | No |
Warranty Information
Polibi products are manufactured with quality and care. For specific warranty details regarding your Full Size Loft Bed, please refer to the warranty card included with your purchase or contact Polibi customer support. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer service. Have your product model number (B0BYNFGDYW) and purchase date ready when you call or email.
Contact Information:
- Website: Visit the official Polibi store on Amazon for support resources.
- Email: Refer to your purchase documentation for direct email support.
- Phone: Refer to your purchase documentation for direct phone support.
