maXpeedingrods 1-3" Front & 2" Rear Leveling Lift Kit Installation Manual

1. Product Overview

This maXpeedingrods leveling lift kit is designed to provide a 1-3 inch front lift and a 2 inch rear lift for compatible vehicles. The kit aims to achieve a level stance, increase ground clearance, and allow for larger tire fitment, enhancing both the aesthetic and functional aspects of your truck or SUV. It includes forged torsion keys, rear lift spacers, and front shock extensions.

Image 1.1: Overview of the maXpeedingrods 1-3" Front & 2" Rear Leveling Lift Kit components, including torsion keys, shock extenders, and rear spacers.

2. Vehicle Compatibility

This leveling lift kit is specifically engineered for the following 6-lug 2WD/4WD vehicle models. Please verify your vehicle's make, year, and model against the list below to ensure proper fitment. This kit is not compatible with vehicles equipped with air or bag suspensions.

Image 2.1: Visual compatibility chart showing supported vehicle makes, years, and models for the lift kit.

3. Package Contents

Upon opening the package, please ensure all the following components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

Image 3.1: Detailed view of the kit's contents, including front adjustable torsion keys, front shock extensions, rear lift spacers, and associated hardware.

• 2 x Front Adjustable Torsion Keys
• 2 x Front Shock Extensions
• 2 x Rear Lift Spacers (65mm / 2 inch)
• Necessary Hardware (bolts, nuts, washers)

4. Installation Guide

WARNING: Professional installation is strongly recommended for this product. Improper installation can lead to vehicle damage, loss of control, and serious injury or death. Always follow proper safety procedures, use appropriate tools, and consult a certified mechanic if you are unsure about any step.

This section provides a general overview of the installation process. Specific steps may vary depending on your vehicle's exact configuration. Refer to a service manual for your specific vehicle model for detailed instructions.

1. Preparation: Park the vehicle on a level surface, engage the parking brake, and block the rear wheels. Lift the front of the vehicle using a jack and support it with jack stands. Remove the front wheels.
2. Front Torsion Bar Adjustment: Relieve tension on the torsion bars. Remove the factory torsion keys and install the new maXpeedingrods forged torsion keys. Adjust the torsion keys to achieve the desired front lift height (1-3 inches).
3. Front Shock Extension Installation: Install the front shock extensions to prevent overextension of the factory shocks.
4. Rear Lift Spacer Installation: Lift the rear of the vehicle and support it with jack stands. Install the 2-inch rear lift spacers between the coil springs and the vehicle's frame.
5. Reassembly & Alignment: Reinstall wheels, lower the vehicle, and torque all fasteners to manufacturer specifications. It is crucial to have a professional wheel alignment performed immediately after installation to ensure proper handling and tire wear.
6. Post-Installation Check: Drive the vehicle slowly and check for any unusual noises, vibrations, or handling characteristics. Re-check all fasteners after 50-100 miles of driving.

5. Operating Your Lifted Vehicle

After installation, your vehicle will exhibit a more level stance and increased ground clearance. This allows for the fitment of larger tires (up to 33x11.50 inches) and improved off-road capability. Be aware that lifting a vehicle can alter its center of gravity and handling characteristics. Drive cautiously until you are accustomed to the changes.

Image 5.1: Diagram illustrating the vehicle's appearance before and after the 1-3" front and 2" rear leveling lift kit installation.

6. Maintenance

Regular inspection and maintenance are crucial for the longevity and safe operation of your lifted vehicle. Periodically check the following:

• Fastener Torque: Ensure all bolts and nuts associated with the lift kit and suspension components remain properly torqued. Re-torque after off-road use or heavy loads.
• Component Wear: Inspect torsion keys, shock extensions, and spacers for any signs of wear, damage, or corrosion.
• Suspension Alignment: Have your vehicle's alignment checked periodically, especially after significant off-road driving or if you notice uneven tire wear.
• Tire Pressure: Maintain correct tire pressure for your specific tire size and vehicle load.

7. Troubleshooting

If you encounter issues after installing the lift kit, consider the following:

• Uneven Stance: Re-check torsion bar adjustments. Ensure both front torsion keys are set to the same height. Verify rear spacers are correctly seated.
• Unusual Noises/Vibrations: Re-check all fasteners for proper torque. Inspect components for any contact points or loose parts. An alignment issue can also cause vibrations.
• Poor Handling: A professional wheel alignment is critical after installation. Incorrect alignment can lead to poor steering response and stability.
• Tire Rubbing: Ensure your tire size is within the recommended limits (up to 33x11.50). Adjust torsion bar height if necessary, or consider minor fender trimming if rubbing persists with appropriate tire sizes.

For persistent issues, consult a qualified automotive technician.

8. Specifications

9. Warranty and Customer Support

maXpeedingrods offers lifetime technical support and a 1-year limited warranty for quality-related issues from the date of purchase. If you have any questions regarding installation, compatibility, or product performance, please do not hesitate to contact our customer support team.

For warranty claims or technical assistance, please visit the official maXpeedingrods website or contact their customer service directly.