Bell+Howell 8773
Bell+Howell Under Cabinet Lights (2 Pack)
Instruction Manual
Product Overview
The Bell+Howell Under Cabinet Lights are a versatile lighting solution designed for various indoor spaces such as kitchens, closets, and cabinets. These LED lights feature motion activation, adjustable brightness, and a wireless, battery-powered design for easy installation.
Image: The Bell+Howell Under Cabinet Lights, shown in a 2-pack with their retail packaging.
Key Features
- Easy Installation: Wireless design with peel-and-stick adhesive and magnetic mounts.
- Motion Activated: Automatically turns on when motion is detected within 10 feet and turns off when motion ceases.
- Energy Efficient: Utilizes LED technology for reduced electricity consumption.
- Adjustable Brightness: Allows users to dim the light to their preferred level.
- Configurable: Each light can be linked with up to two other units using provided cables for extended lighting coverage.
Setup and Installation
The Bell+Howell Under Cabinet Lights are designed for quick and easy installation without the need for complex wiring. Follow these steps to set up your lights:
- Charge the Lights: Before first use, ensure the lights are fully charged. Connect the provided USB cable to the light's USB port and to a compatible USB power source. The charging indicator will show when charging is complete.
- Select Mounting Location: Choose a clean, dry, and smooth surface under cabinets, inside closets, or any desired area.
- Mounting Options:
- Peel & Stick: Remove the protective backing from the 3M adhesive tape on the back of the light. Press the light firmly onto the desired surface for at least 30 seconds.
- Magnetic Mounts: The lights come with integrated magnetic mounts. Attach the light to any metallic surface, or use the included adhesive-backed metal plates to create a magnetic mounting point on non-metallic surfaces.
- Link Multiple Lights (Optional): If using multiple lights, connect them using the provided linking cables to illuminate larger areas simultaneously.
Image: Visual guide demonstrating the peel-and-stick 3M tape and magnetic mounting options for simple installation.
Operation
The Bell+Howell Under Cabinet Lights offer intuitive operation with motion sensing and adjustable settings.
Motion Sensor Functionality
The lights are equipped with a motion sensor that detects movement up to 10 feet away. When motion is detected, the light will automatically turn on. After a period of no motion, the light will automatically turn off to conserve energy.
Image: A diagram illustrating the motion sensor's 10-foot detection range and 120-degree angle, showing how it activates and deactivates based on movement.
Adjustable Brightness
To adjust the brightness level, locate the control button on the light. Press and hold the button to cycle through different brightness settings until your desired illumination is achieved. Release the button to set the brightness.
On/Off Switch
A physical on/off switch is located on the light for manual control, allowing you to override the motion sensor or turn the light off completely when not needed.
Care and Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your Bell+Howell Under Cabinet Lights.
Battery Life
The lights are designed for long-lasting battery performance, offering 2-30 hours of working time depending on usage and brightness settings. Recharge the lights when the brightness diminishes or they no longer activate reliably.
Image: A graphic illustrating the extended battery life of the lights, indicating 2-30 hours of operation on a single charge.
Cleaning
To clean the lights, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the lights in water.
Troubleshooting
If you encounter any issues with your Bell+Howell Under Cabinet Lights, refer to the following troubleshooting guide:
| Problem | Possible Cause / Solution |
|---|---|
| Light does not turn on. | Battery may be depleted. Recharge the light fully. Ensure the on/off switch is in the 'on' position. Check if the motion sensor is obstructed. |
| Motion sensor not working or light stays on. | Ensure the light is in motion sensor mode (if applicable). Verify there are no constant movements or heat sources within the sensor's range. Check for obstructions blocking the sensor. |
| Light falls off mounting surface. | The mounting surface may not be clean, dry, or smooth. Clean the surface thoroughly before re-applying the adhesive or magnetic plate. Apply firm pressure during installation. |
| Brightness is too low or inconsistent. | Battery may be low. Recharge the light. Adjust the brightness setting using the control button. |
Technical Specifications
| Specification | Detail |
|---|---|
| Product Dimensions | 5.91"D x 1.57"W x 1.97"H |
| Item Weight | 12.3 ounces (350 Grams) |
| Lamp Type | LED |
| Shade Color | White |
| Shade Material | Plastic |
| Switch Type | Remote (Control Method: Remote) |
| Style | Under Cabinet Lights |
| Special Feature | Motion Sensor |
| Power Source | Corded Electric (USB Connectivity) |
| Room Type | Kitchen (Suitable for various indoor spaces) |
| Number of Light Sources | 2 |
| Included Components | 2 Lights |
| Mounting Type | Adhesive, Magnetic Mount, Under Cabinet |
| Brightness | 400 Lumen |
| Is Cordless? | Yes |
| Model Name | Under Cabinet Lights - 2 Pack |
| Manufacturer | E Mishan & Sons |
Warranty and Support
For warranty information or technical support, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
You can find more information about Bell+Howell products by visiting their official store: Bell+Howell Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.