1. Introduction
This manual provides instructions for the installation and use of the Legrand On-Q 17-inch Dual-Purpose In-Wall Media Enclosure (ENP1700-NA) and the On-Q AC1050-EMK Mounting Plate. These products are designed to provide organized storage and distribution for structured wiring and AV components within a wall cavity.
The 17-inch Media Enclosure is constructed from Wi-Fi transparent material, making it suitable for housing wireless components and AV devices directly behind televisions or other media centers. It supports both new construction and retrofit installations.
The AC1050-EMK Mounting Plate Combo Kit offers device mounting and cable management solutions, providing an elevated platform for various third-party devices within the enclosure.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Disconnect Power: Always disconnect power to the area where installation will occur before beginning any work.
- Qualified Personnel: Installation should be performed by qualified personnel familiar with local electrical codes and wiring practices.
- Wall Integrity: Ensure the wall structure can support the weight of the enclosure and its contents.
- Ventilation: Do not block ventilation openings of the enclosure or any devices installed within it.
- Cable Management: Route cables carefully to prevent pinching or damage.
3. Package Contents
3.1. On-Q 17 Inch Media Enclosure (ENP1700-NA)
- 17-inch Dual-Purpose In-Wall Enclosure
- Split Cover
- Trim Ring
- Drywall Clips (for retrofit installations)
Image: The Legrand On-Q 17 Inch Media Enclosure, shown with its white split cover and trim ring, ready for in-wall installation.
3.2. On-Q AC1050-EMK Mounting Plate Combo Kit
- 1x AC1050 5 Inch Mounting Bracket
- 2x AC1051-RC Ratchet Clips
- 2x AC1051-KH Keyhole Post Clips
- 2x AC1052-CC Cable Channels
- 1x Hook & Loop Strap
Image: All components of the On-Q AC1050-EMK Mounting Plate Combo Kit, including the 5-inch mounting bracket, ratchet clips, keyhole post clips, cable channels, and a hook and loop strap.
4. Setup and Installation
4.1. Media Enclosure Installation (ENP1700-NA)
The 17-inch Media Enclosure can be installed in both new construction and retrofit scenarios. It is designed to fit within standard wall cavities.
4.1.1. Site Selection
- Choose a location behind a TV or media center for optimal AV device concealment.
- Ensure there are no studs, pipes, or electrical wires in the desired installation area.
- Verify sufficient depth within the wall cavity.
4.1.2. New Construction Installation
- Mount the enclosure directly to a wall stud using appropriate fasteners (not included).
- Ensure the enclosure is flush with the stud face.
- Run necessary wiring into the enclosure before drywall installation.
4.1.3. Retrofit Installation
- Use the provided template (if applicable, or measure carefully) to cut an opening in the drywall.
- Insert the enclosure into the opening.
- Secure the enclosure using the included drywall clips. Tighten the clips until the enclosure is firmly seated against the drywall.
Image: The On-Q Media Enclosure installed within a wall, positioned behind a television mount for discreet storage of AV devices.
4.2. Mounting Plate Installation (AC1050-EMK)
The 5-inch Mounting Plate can be installed vertically or horizontally within the media enclosure to create an elevated mounting platform for devices.
- Identify the desired mounting location and orientation within the enclosure. The enclosure features a universal mounting pattern.
- Attach the AC1050 5 Inch Mounting Bracket to the enclosure's internal mounting points using the provided clips or screws (if applicable). The mounting plate offers 1.5 inches of elevation.
- Utilize the AC1052-CC Cable Channels to route and manage cables neatly along the sides of the mounting plate or enclosure.
- Use the AC1051-RC Ratchet Clips and AC1051-KH Keyhole Post Clips to secure various third-party devices to the mounting plate. The hook and loop strap can also be used for additional device security.
Image: A network switch being installed onto the On-Q mounting plate within the media enclosure, demonstrating the second layer device mounting capability.
Image: An interior view of the On-Q Media Enclosure, showcasing various AV devices like a Samsung One Connect Box and network switch, neatly organized with cable management.
5. Operating Instructions
Once installed, the On-Q Media Enclosure and Mounting Plate function as a passive storage and organization system for your AV and structured wiring components.
- Device Placement: Place compatible devices such as Samsung One Connect Box, Apple TV, Roku, Amazon Fire TV, or network switches onto the mounting plate or directly within the enclosure.
- Cable Routing: Utilize the integrated cable channels and hook and loop straps to manage and secure all power and data cables, preventing tangles and ensuring proper airflow.
- Access: The split cover allows for easy access to devices and wiring when maintenance or changes are required.
6. Maintenance
The On-Q Media Enclosure and Mounting Plate require minimal maintenance.
- Cleaning: Periodically wipe the exterior of the enclosure and cover with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Occasionally inspect cables and connections within the enclosure to ensure they are secure and undamaged.
- Ventilation: Ensure that the enclosure's ventilation points are not obstructed to maintain proper airflow for internal devices.
7. Troubleshooting
7.1. Wi-Fi Signal Issues
- Symptom: Weak or intermittent Wi-Fi signal from devices inside the enclosure.
- Solution: While the enclosure is Wi-Fi transparent, dense packing of multiple devices or certain wall materials can affect signal. Ensure devices are positioned optimally and consider external antenna options if available for your devices.
7.2. Devices Not Fitting
- Symptom: A device is too large or awkwardly shaped to fit comfortably.
- Solution: Utilize the AC1050-EMK Mounting Plate for elevated mounting, which can create more space. Experiment with different orientations of the device. Ensure the device's dimensions are compatible with the 17-inch enclosure.
7.3. Cable Management Difficulties
- Symptom: Cables are messy or difficult to route.
- Solution: Make full use of the AC1052-CC Cable Channels and the provided hook and loop strap. Plan your cable runs before securing devices. Consider using shorter cables where possible.
8. Specifications
- Product Name: Legrand On-Q 17 Inch Media Enclosure and AC1050-EMK Mounting Plate
- Enclosure Model: ENP1700-NA
- Mounting Plate Model: AC1050-EMK
- Enclosure Size: 17 inches (height, approximate)
- Material: Plastic (Wi-Fi transparent)
- Mounting Plate Elevation: 1.5 inches
- Installation Type: In-wall (New Construction, Retrofit)
- Compatibility: Samsung One Connect Box, Apple TV, Roku, Amazon Fire TV, network switches, and other 3rd party structured wiring components.
- Manufacturer: On-Q
- Date First Available: March 15, 2023
9. Warranty and Support
For warranty information and technical support, please refer to the official On-Q website or contact On-Q customer service directly. Keep your purchase receipt for warranty claims.
On-Q Official Website: www.legrand.us/on-q
