Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your PXN A7 Racing Wheel Gear Shifter. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Image: The PXN A7 Racing Wheel Gear Shifter, featuring a 6+1 gear pattern and integrated handbrake button.
Compatibility Information
The PXN A7 Gear Shifter offers broad compatibility with various racing wheels and platforms. Please review the following compatibility details carefully:
- PXN Steering Wheels: Supports PXN-V9 and PXN-V10 steering wheels using the provided Aviation head to RJ11 cable. Connect the crystal head to the steering wheel port.
- ThrustMaster Steering Wheels: Compatible with ThrustMaster T150, T300, T248P, T248X on PS3, PS4, PS5, and Xbox platforms using the provided Aviation head to DIN cable. Insert the A7 into the back of the ThrustMaster steering wheel.
- PC Compatibility: The A7 shifter can be used with a PC via the Aviation head to USB cable. This interface is compatible with most steering wheels on the computer. Connect the USB directly to a computer port, not the steering wheel.
- Important Note on Logitech: The PXN-A7 does not support Logitech steering wheels on host platforms (PS3/PS4/PS5/Xbox).
- Important Note on ThrustMaster PC: The PXN-A7 does not support ThrustMaster steering wheels when connected to a PC.
Image: Comprehensive diagram showing the PXN A7 Shifter and its various connection cables (DIN-RJ11, DIN-USB, DIN-DIN) for different steering wheels and platforms.
Setup Instructions
Package Contents:
- PXN A7 Gear Shifter Unit
- DIN-USB Cable (for PC connection)
- DIN-RJ11 Cable (for PXN V9/V10 steering wheels)
- DIN-DIN Cable (for ThrustMaster T150/T300/T248P/T248X)
- User Manual
Image: Contents of the PXN A7 Shifter package, including the shifter unit and three types of connection cables.
Mounting the Shifter:
The PXN A7 shifter includes an adjustable fixing clamp for stable mounting.
- Identify a suitable surface (workbench or steering wheel bracket) with a thickness of up to 1.96 inches (5 cm).
- Position the shifter on the desired surface.
- Tighten the adjustable clamp securely until the shifter is stable and does not move during use.
Image: Close-up view of the adjustable fixing clamp mechanism on the PXN A7 Shifter, designed for secure attachment to various surfaces.
Connecting the Shifter:
Select the appropriate cable based on your steering wheel and platform:
- For PXN V9/V10 Steering Wheels: Use the DIN-RJ11 cable. Connect the DIN end to the shifter and the RJ11 (crystal head) end to the designated port on your PXN steering wheel.
- For ThrustMaster Steering Wheels (PS3/PS4/PS5/Xbox): Use the DIN-DIN cable. Connect the DIN end to the shifter and the other DIN end to the back of your ThrustMaster steering wheel.
- For PC (with most steering wheels): Use the DIN-USB cable. Connect the DIN end to the shifter and the USB end directly to a USB port on your computer. Do not connect the USB cable to the steering wheel.
Operating Instructions
Gear Shifting (6+1 Pattern):
The PXN A7 features a 6+1 gear shifter design. The "H" pattern allows for smooth and accurate gear changes.
- Forward Gears (1-6): Engage gears by moving the lever into the corresponding "H" pattern slot.
- Reverse Gear (R): To engage reverse, return the gear lever to the neutral (middle) position, press down on the lever, and then move it into the 6th gear slot. This action activates the reverse gear.
Image: Close-up of the PXN A7 Shifter's gear knob and H-pattern gate, illustrating the 6+1 gear layout with push-down reverse.
Multi-function Buttons:
The shifter unit includes two function buttons for enhanced control during gameplay.
- Handbrake Button: Press this button to activate an immediate brake function in compatible games. This can be used for quick stops or in situations where pedal braking is not feasible.
- High/Low Gear Button: This button allows for switching between high and low gear ranges, particularly useful in truck driving simulators or games that support such functionality.
Image: Detailed view of the PXN A7 Shifter's top panel, showing the "LO⇌HI" (High/Low Shifting Switch) and "P" (Handbrake) buttons, along with an LED indicator.
Adjusting Gear Lever Height:
The gear lever's height can be adjusted by approximately 3 cm. It can also be disassembled if preferred.
- To adjust, gently twist the upper part of the gear lever.
- Raise or lower it to the desired height.
- Twist to secure it in place.
- To disassemble, continue twisting counter-clockwise until the lever detaches.
Maintenance
To ensure the longevity and optimal performance of your PXN A7 Gear Shifter, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the shifter's surface. Avoid abrasive cleaners or solvents that could damage the finish.
- Storage: When not in use, store the shifter in a clean, dry environment away from direct sunlight and extreme temperatures.
- Cable Care: Handle connection cables carefully. Avoid sharp bends or excessive pulling that could damage the connectors or wiring.
- Inspection: Periodically check the mounting clamp for tightness and ensure all connections are secure.
Troubleshooting
If you encounter issues with your PXN A7 Gear Shifter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shifter not recognized by game/system. | Incorrect cable connection, incompatible steering wheel/platform, driver issue (PC). |
|
| Gears not engaging or incorrect gear detection. | Improper shifting technique, calibration issue, internal mechanism problem. |
|
| Shifter feels loose or unstable. | Mounting clamp not tightened sufficiently. |
|
Product Specifications
- Model: PXN A7
- Gear Pattern: 6+1 (H-pattern with push-down reverse)
- Material: High-quality metal face, ABS body, solid steel gear shaft
- Connectivity: DIN-USB, DIN-RJ11, DIN-DIN
- Cable Length: Approximately 2000 mm (2 meters)
- Dimensions (Shifter Unit):
- Height: Approximately 180 mm
- Width: Approximately 105 mm
- Dimensions (with Clamp):
- Height: Approximately 200 mm
- Width: Approximately 180 mm
- Item Weight: 2.01 Pounds (approx. 0.91 kg)
- Mounting: Adjustable clamp, supports surfaces up to 1.96 inches (5 cm) thick
- Additional Features: Handbrake button, High/Low gear shift button, Adjustable gear lever height (3 cm)
Image: Diagram illustrating the physical dimensions of the PXN A7 Shifter, including height and width measurements for the unit and with the clamp attached.
Warranty Information
PXN products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official PXN website. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact PXN customer support through their official channels. Visit the PXN Store on Amazon or their official website for contact information.
