1. Introduction
Thank you for choosing the HOMCOM Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image 1: The HOMCOM Console Table, showcasing its design and potential use in an entryway.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Periodically check and re-tighten fasteners as needed.
- Do not exceed the maximum weight capacity of 66 lbs (33 lbs for the top shelf, 33 lbs for the bottom shelf).
- This product is made from engineered wood. Engineered wood may pose safety hazards if not used properly. Follow all safety instructions provided by the manufacturer.
- Anti-Tipping Hardware: It is highly recommended to attach the table to the wall using the included anti-tipping hardware to prevent accidental tipping, especially in households with children or pets.

Image 2: Illustration of the anti-tipping hardware installation process, showing how to secure the table to a wall for stability.
3. Package Contents
Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Tabletop Panel
- Side Panels (Legs)
- Bottom Slatted Shelf
- Cross Bars / Support Beams
- Assembly Hardware (screws, dowels, cam locks, etc.)
- Anti-Tipping Hardware
- Assembly Instructions Manual
4. Assembly Instructions
Assembly requires two people. Please follow these steps carefully. A screwdriver (not included) will be needed.
- Prepare the Workspace: Clear a spacious area and lay out all components on a soft, clean surface to prevent damage.
- Attach Cross Bars to Side Panels: Secure the cross bars between the side panels (legs) using the provided hardware (e.g., screws, dowels, cam locks). Ensure they are oriented correctly as per the diagrams.
- Install Bottom Slatted Shelf: Attach the bottom slatted shelf to the assembled side panels and cross bars. Make sure all connections are firm.
- Attach Tabletop: Carefully place the tabletop panel onto the assembled base. Align the pre-drilled holes and secure the tabletop using the appropriate screws.
- Install Anti-Tipping Hardware: Locate a suitable wall stud or use appropriate wall anchors. Attach one end of the anti-tipping strap to the back of the console table and the other end to the wall. Ensure the strap is taut to prevent tipping.
- Final Check: Verify that all screws and fasteners are tightened. Gently test the stability of the table before placing any items on it.
Video 1: An overview of the HOMCOM Console Table, demonstrating its features and design. This video is provided by the manufacturer, Aosom Direct.
5. Operating Instructions
The HOMCOM Console Table is designed for indoor use to display decorative items, store books, or serve as an accent piece in various rooms.
- Weight Capacity: The total weight capacity for the table is 66 lbs. The top surface can hold up to 33 lbs, and the bottom slatted shelf can hold up to 33 lbs. Do not overload the table.
- Placement: Place the table on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.
- Versatile Use: This table can function as an entryway table, sofa table, or a display stand.

Image 3: The console table highlighting its spacious tabletop and functional bottom slatted shelf for storage and display.
6. Maintenance
To ensure the longevity and appearance of your console table, follow these simple maintenance guidelines:
- Cleaning: Wipe the table surfaces with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the engineered wood finish.
- Spills: Immediately wipe up any spills to prevent staining or water damage.
- Fasteners: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
7. Troubleshooting
If you encounter any issues with your console table, refer to the following common solutions:
- Wobbling Table: Ensure the table is placed on a level surface. Check all assembly hardware and tighten any loose screws. If the issue persists, verify that the anti-tipping hardware is correctly installed and secured to the wall.
- Scratches/Dents: Minor scratches can sometimes be touched up with furniture repair markers that match the wood finish. For significant damage, contact customer support.
- Missing Parts: If you discover missing parts during assembly, do not attempt to substitute with non-original components. Contact HOMCOM customer support for replacement parts.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HOMCOM |
| Model Number | 837-349V81BN |
| Product Dimensions (D x W x H) | 14.25" x 52" x 32" |
| Item Weight | 41.8 Pounds |
| Maximum Weight Recommendation | 66 Pounds (Total) |
| Top/Bottom Shelf Weight Capacity | 33 Pounds (Each) |
| Frame Material | Engineered Wood |
| Color | Brown |
| Number of Shelves | 1 (bottom slatted shelf) |
| Required Assembly | Yes |
| Recommended Number of People for Assembly | 2 |
| Indoor/Outdoor Usage | Indoor |
| Product Care Instructions | Wipe with Dry Cloth |

Image 4: Detailed dimensions of the console table for accurate placement and planning.
9. Warranty and Support
This HOMCOM Console Table comes with a 1-year warranty against manufacturer defects. For warranty claims, missing parts, or any other product-related inquiries, please contact HOMCOM customer support.
Manufacturer: Aosom LLC
Please have your model number (837-349V81BN) and purchase information ready when contacting support.