Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN Bathroom Exhaust Fan with LED Light, Model OL17004. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image: OREiN Bathroom Exhaust Fan with LED Light, showcasing its design and adjustable color temperature options.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Install this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
- Before servicing or cleaning, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel-burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Ducted fans must always be vented to the outdoors.
- This unit is not intended for use in kitchens.
- Do not use this fan with any solid-state speed control device.
Package Contents
Verify that all components are present before beginning installation:
- OREiN Bathroom Exhaust Fan Unit (Housing with Motor and Duct Connector)
- LED Light Cover
- Mounting Bracket
- Wire Connectors (Wago-style)
- Mounting Screws
Image: Components included with the OREiN Bathroom Exhaust Fan.
Specifications
| Feature | Specification |
|---|---|
| Brand | OREiN |
| Model Name | OL17004 |
| Air Flow Capacity | 110 CFM (Cubic Feet Per Minute) |
| Noise Level | 2.0 Sones |
| Wattage | 27 Watts (Total, Fan + Light) |
| Light Output | 1500 Lumens |
| Color Temperature (CCT) | 3000K (Soft White), 4000K (Bright White), 5000K (Daylight) Selectable |
| Nightlight | 2200K |
| Voltage | 120 Volts |
| Housing Dimensions (L x W x H) | 7.68" x 7.55" x 6.42" |
| Light Cover Size | 9.8" x 9.8" |
| Ceiling Opening Size | 8.11" x 7.48" |
| Duct Connector Size | 4 inches (round) |
| Certifications | ETL, FCC Listed |
Image: Product dimensions and required ceiling opening for installation.
Setup and Installation
Tools Required: Screwdriver, Wire Strippers, Drill, Measuring Tape, Utility Knife, Safety Glasses, Gloves.
Important: Ensure power is OFF at the circuit breaker before starting installation.
- Prepare Ceiling Opening: Create a ceiling opening of 8.11" x 7.48". Ensure there is sufficient space above the ceiling for the fan housing (7.68" x 7.55" x 6.42").
- Mount the Housing:
- Attach the mounting bracket to the ceiling joists. The bracket is designed for easy installation between joists.
- Slide the fan housing into the mounting bracket. Secure the housing to the bracket using the provided screws or by nailing/screwing directly to the joist if preferred.
- Connect Ductwork: Connect a 4-inch round duct to the fan's duct connector. Ensure the duct is securely fastened and sealed to prevent air leakage. Vent the ductwork to the outdoors.
- Electrical Wiring:
- Route the electrical supply wires (120V AC) to the fan housing.
- Connect the fan's wires to the household wiring using the provided wire connectors. Follow the wiring diagram below.
- Ensure proper grounding.
- The fan and light can be wired to separate switches for independent control. The LED light wires cannot be connected to a dimmer switch.
- Install Light Cover: Once wiring is complete and secured, attach the LED light cover to the fan housing. Ensure it clicks into place or is securely fastened according to the design.
Image: Electrical wiring diagram and installation dimensions.
Operating Instructions
Fan Operation
The exhaust fan operates at 110 CFM to effectively remove moisture and odors from your bathroom. It features a low noise level of 2.0 sones for quiet performance.
- Turn on the dedicated fan switch to activate the exhaust fan.
- Turn off the fan switch to deactivate the fan.
Image: Installed fan highlighting key performance metrics.
LED Light Operation
The integrated LED light offers adjustable color temperature and a nightlight function.
- Adjusting Color Temperature (CCT):
The fan features a toggle switch on the back of the unit (accessible before final installation of the light cover) to select your desired color temperature: 3000K (Soft White), 4000K (Bright White), or 5000K (Daylight). Set this switch to your preferred CCT before installing the light cover.
Image: Demonstrates the three selectable color temperatures of the LED light.
- Nightlight Mode:
The fan includes a 2200K nightlight feature. To activate or cycle through the nightlight mode, quickly turn the light switch OFF and then ON again within 2 seconds. This action will switch between the main light and the nightlight mode.
Image: The 2200K nightlight function in a bathroom setting.
Maintenance
Regular maintenance ensures optimal performance and longevity of your exhaust fan.
- Cleaning the Light Cover:
- Turn off power at the circuit breaker before cleaning.
- Carefully remove the light cover.
- Wipe the light cover with a soft, damp cloth. Do not use abrasive cleaners.
- Allow the cover to dry completely before reattaching.
- Cleaning the Fan Grille/Housing:
- With the light cover removed and power off, gently vacuum or wipe away any dust or debris from the fan grille and accessible parts of the housing.
- Do not spray water directly into the fan motor or electrical components.
- LED Light Source: The LED light source is integrated and designed for long life. It is not user-replaceable. If the LED light fails, contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all wire connections are secure. Test switch functionality. |
| Light does not turn on. | No power supply; loose wiring; faulty switch; CCT toggle switch not set. | Check circuit breaker. Ensure all wire connections are secure. Test switch functionality. Verify the CCT toggle switch on the fan unit is set to a valid position (3000K, 4000K, or 5000K). |
| Fan is noisy or vibrates excessively. | Loose mounting; debris in fan blades; motor issue. | Ensure fan housing is securely mounted. Turn off power and inspect fan blades for obstructions. If noise persists, contact customer support. |
| Poor ventilation/steam not clearing. | Blocked ductwork; improper duct installation; fan motor issue. | Check ductwork for kinks or blockages. Ensure duct is properly sealed and vented outdoors. Verify fan motor is running at full speed. |
| Light color temperature is incorrect or stuck. | CCT toggle switch not set correctly. | Turn off power, remove light cover, and adjust the CCT toggle switch on the fan unit to your desired setting. Reinstall cover and restore power. |
| Nightlight function not working. | Incorrect switching sequence. | Ensure you are cycling the light switch OFF and ON again within 2 seconds to activate the nightlight mode. |
Warranty and Support
For warranty information or technical assistance, please contact OREiN customer support. Refer to your purchase documentation for specific warranty terms and conditions.
Contact Information:
- For support, please visit the OREiN store on Amazon: OREiN Amazon Store
- Alternatively, search for "OREiN" online to find official contact channels.
Additional resources, including a detailed Installation Manual and User Guide, may be available in PDF format:
