Ankilo Projection Alarm Clock WA113 User Manual

Introduction

Thank you for purchasing the Ankilo Projection Alarm Clock WA113. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read it thoroughly to ensure proper use and to enjoy all its features.

Package Contents

1 x Ankilo Projection Alarm Clock
1 x USB Power Cable (1.5m)
1 x CR2032 Button Cell (pre-installed for memory function)
1 x User Manual

Product Features

7.9-inch Large LED Display: Clear and easy-to-read time, temperature, and date.
180° Adjustable Projection: Project time onto your ceiling or wall with adjustable brightness.
USB Charging Port: Conveniently charge your devices (e.g., smartphone) directly from the clock.
Battery Backup: Built-in CR2032 button cell preserves time and alarm settings during power outages.
Adjustable Display Brightness: 4 levels (Bright/Medium/Low/Off) for optimal viewing comfort.
Night Mode: Automatic dimming of the display during specified hours (default 18:00-5:59).
Snooze Function: Provides an extra 5 minutes of sleep.
12/24H Time Format: Easily switch between standard and military time.
Temperature Display: Shows ambient room temperature.

Ankilo Projection Alarm Clock showing its 7.9-inch display and icons for features like time, alarm, 12/24H, snooze, projection, 4-level brightness, and temperature. — Image: Overview of the Ankilo Projection Alarm Clock's key features and large display.

Controls and Display

Familiarize yourself with the buttons and display elements of your alarm clock:

Diagram of the Ankilo Projection Alarm Clock's buttons and display features, including time, alarm icon, 12/24 hour icon, projection lamp, and control buttons (DOWN, UP, SNOOZE/LIGHT, ALARM, SET, PROJECT). — Image: Detailed diagram illustrating the location and function of all buttons and display indicators on the Ankilo Projection Alarm Clock.

SET: Used to enter time/alarm setting mode.
ALARM: Activates/deactivates the alarm and enters alarm setting mode.
UP / DOWN: Adjusts values during setting modes.
SNOOZE/LIGHT: Activates snooze during an alarm; adjusts display brightness.
PROJECT: Activates/deactivates projection; adjusts projection brightness.
Projection Lamp: Emits the time projection.
Power Port: Connects to the USB power cable.
CR2032 Battery Compartment: Houses the backup battery.

Setup

Power Connection: Connect the provided USB power cable to the "Power Port" on the back of the alarm clock and plug the other end into a USB power adapter (not included) or a powered USB port. The LED screen will illuminate.
Battery Backup: The CR2032 button cell is pre-installed. This battery ensures that your time and alarm settings are retained in case of a power interruption.
Initial Time Setting:
- Press and hold the SET button to enter time setting mode.
- Use the UP or DOWN buttons to adjust the hour, then press SET to confirm.
- Repeat for minutes, year, month, and day.
- Press SET again to exit time setting mode.
12/24H Format: In normal time display mode, short press the UP button to switch between 12-hour and 24-hour formats.
Temperature Unit: In normal time display mode, short press the DOWN button to switch between Celsius (°C) and Fahrenheit (°F).

Ankilo Projection Alarm Clock displaying time in both 12-hour and 24-hour formats. — Image: The clock displaying time in both 12-hour and 24-hour formats, illustrating the selectable time display option.

Operating Instructions

Setting the Alarm

Press and hold the ALARM button to enter alarm setting mode.
Use the UP or DOWN buttons to adjust the alarm hour, then press ALARM to confirm.
Repeat for alarm minutes.
Press ALARM again to exit alarm setting mode.
To activate/deactivate the alarm, short press the ALARM button. An alarm icon will appear/disappear on the display.

Ankilo Projection Alarm Clock showing three different alarm modes: Monday to Friday, Monday to Saturday, and Everyday. — Image: The clock illustrating options for setting alarms for weekdays, weekends, or every day.

Ankilo Projection Alarm Clock showing multiple alarm clock modes for different days of the week. — Image: The clock displaying various alarm modes, allowing users to set alarms for specific days or daily.

Snooze Function

When the alarm sounds, press the large SNOOZE/LIGHT button on top to activate the snooze function. The alarm will pause for 5 minutes and then sound again.

Display Brightness Adjustment

Short press the SNOOZE/LIGHT button to cycle through 4 levels of display brightness: Bright, Medium, Low, and Off.

Ankilo Projection Alarm Clock showing four levels of adjustable display brightness: Bright, Medium, Low, and Off. — Image: The clock demonstrating its four adjustable display brightness levels.

Ankilo Projection Alarm Clock showing four levels of screen adjustment brightness: Bright, Medium, Dim, and Off. — Image: Visual representation of the four screen brightness settings available on the clock.

Night Mode

The alarm clock can automatically dim its display during a set period. The default night mode is from 18:00 to 5:59. You can customize this period as needed.

Projection Function

The projector can display the time, temperature, and date on your ceiling or wall. The projection can be rotated 180° for optimal viewing.

Short press the PROJECT button to turn the projection on/off.
Long press the PROJECT button to adjust the projection brightness (2 levels).
Important Note: The projected digits are only correct when the projection direction is in the opposite direction of the screen. If projecting forward, the numbers will be reversed.

Ankilo Projection Alarm Clock projecting time onto a bedroom wall, showing projection distance and 180° flip projection feature. — Image: The clock projecting time onto a wall, demonstrating its adjustable projection and distance capabilities.

Ankilo Projection Alarm Clock showing three levels of projection brightness: Off, Dim, and Bright, with projected time on a wall. — Image: The clock illustrating three levels of projection brightness: Off, Dim, and Bright.

Diagram showing correct and incorrect projection directions for the Ankilo Projection Alarm Clock. The correct projection is backward from the clock, while forward projection results in reversed numbers. — Image: A visual guide on how to correctly orient the projection for proper display of digits.

Ankilo Projection Alarm Clock shown in various room settings (living room, bedroom, office, kitchen) with time projected on walls or ceilings. — Image: Examples of the clock's projection feature in different home environments.

Official Product Video

Video: An official product video from Ankilo-NYSM demonstrating the features and operation of the Ankilo Projection Alarm Clock.

Maintenance

Clean the display and casing with a soft, dry cloth. Avoid abrasive cleaners.
Ensure the projection lens is free from dust for clear projection.
If the backup battery needs replacement, use a CR2032 button cell.
Keep the device away from water and direct sunlight.

Troubleshooting

Problem	Possible Cause	Solution
Display is dim or off.	Brightness setting is too low or off; Night Mode is active.	Press SNOOZE/LIGHT to adjust brightness. Check Night Mode settings.
Projection is unclear or reversed.	Incorrect projection direction; lens is out of focus or dirty.	Adjust the projection angle. Ensure the clock is positioned correctly (projecting backward from the screen). Clean the lens.
Alarm does not sound.	Alarm is not activated; volume is too low.	Press ALARM to activate (check for alarm icon). Adjust alarm volume.
Time/settings reset after power outage.	Backup battery is dead or missing.	Replace the CR2032 button cell.

Specifications

Brand: Ankilo
Model: WA113
Display Type: Digital LED
Display Size: 7.9 inches
Projection: 180° adjustable, 2 brightness levels
Display Brightness: 4 levels (Bright/Medium/Low/Off)
Power Source: Corded Electric (USB cable included)
Battery Backup: 1 x CR2032 Lithium Metal battery (included)
Product Dimensions: 7.9"W x 7.9"H (Note: Dimensions may refer to display area or overall size. Actual product dimensions may vary slightly.)
Item Weight: 7 ounces
Material: Metal
Connectivity: USB
Special Features: Adjustable Brightness, Charging Port, Night Mode, Projection Clock, Temperature Display

Warranty and Support

This Ankilo Projection Alarm Clock WA113 comes with a Lifetime Warranty. For any questions, technical support, or warranty claims, please contact Ankilo customer service through the retailer where you purchased the product or visit the official Ankilo website for contact information.

Ankilo WA113