Vente-unique DIVINA Semi-Island Bathtub Instruction Manual

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Vente-unique DIVINA semi-island bathtub. Please read these instructions carefully before installation and use, and retain them for future reference. This bathtub is designed for single-person use and features a contemporary white acrylic finish.

2. Safety Information

• Ensure the installation area can support the combined weight of the bathtub, water (175 liters), and a person. Consult a structural engineer if unsure.
• All plumbing work must be performed by qualified professionals and comply with local building codes and regulations.
• Avoid using abrasive cleaners, harsh chemicals, or scouring pads on the acrylic surface, as these can cause irreversible damage.
• Do not stand on the edge of the bathtub.
• Supervise children and individuals with limited mobility when they are using or near the bathtub.
• Ensure proper ventilation in the bathroom to prevent mold and mildew growth.

3. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact Vente-unique customer service immediately.

• DIVINA Semi-Island Bathtub (with integrated apron)
• Siphon
• Overflow mechanism
• Pop-up waste (Bonde clic-clac)
• Adjustable feet (pre-installed or included for adjustment)

4. Specifications

Image: Technical drawing showing the length (130cm), width (71.5cm), and height (58cm) of the DIVINA bathtub, along with internal dimensions and angles for installation planning.

5. Setup and Installation

The DIVINA bathtub is delivered assembled, meaning the main structure and apron are integrated. Installation primarily involves positioning the bathtub and connecting it to your existing plumbing system.

1. Preparation: Ensure the floor where the bathtub will be placed is level, clean, and structurally sound. Verify that the water supply and drainage connections in your bathroom are correctly positioned to align with the bathtub's waste and overflow outlets.
2. Positioning: Carefully move the bathtub into its desired semi-island location. The integrated apron means it is designed to be placed against one wall, with the other sides exposed.
3. Leveling: Use the adjustable feet located at the base of the bathtub to ensure it is perfectly level. This is crucial for proper water drainage and overall stability. Use a spirit level to check all sides.
4. Drainage Connection: Connect the included siphon and pop-up waste assembly to your floor drain. Ensure all connections are secure and watertight using appropriate plumbing seals and tape.
5. Overflow Connection: Connect the overflow pipe from the bathtub's overflow opening to the siphon. Confirm this connection is also watertight.
6. Water Supply (Faucet Not Included): If you are installing a deck-mounted or wall-mounted faucet, connect the water supply lines according to the faucet manufacturer's instructions. Note: The DIVINA bathtub does not include a faucet.
7. Final Inspection: Once all connections are made, fill the bathtub with water and carefully check all plumbing connections for any leaks. Allow the water to drain completely to ensure the pop-up waste and overflow system function correctly.

Image: Top-down view of the Vente-unique DIVINA semi-island bathtub, highlighting its oval interior and the placement of the integrated overflow and waste system.

6. Operating Instructions

Using your DIVINA bathtub is simple and intuitive:

• Filling: Ensure the pop-up waste is in the closed position (typically by pressing it down). Fill the bathtub with water to your desired level using your installed faucet. Do not exceed the overflow limit to prevent water spillage.
• Draining: To drain the bathtub, operate the pop-up waste mechanism (usually by pressing it again) to open the drain. The water will flow out through the siphon.
• Overflow: The integrated overflow system is designed to prevent the bathtub from overfilling. If the water level rises too high, excess water will be directed into the drain system.

Image: Close-up view of the bathtub's integrated overflow slot and the pop-up waste mechanism, located near the top edge of the tub, demonstrating their functional design.

7. Maintenance and Care

Proper and regular maintenance will preserve the aesthetic appeal and extend the lifespan of your acrylic bathtub.

• Regular Cleaning: Clean the bathtub regularly after use with a soft cloth or sponge and a mild, non-abrasive liquid bathroom cleaner. Rinse the surface thoroughly with clean water immediately after cleaning to remove all cleaner residue.
• Avoid Harsh Chemicals: Do not use abrasive powders, steel wool, scouring pads, strong acids, alkalis, or solvents (e.g., acetone, paint thinner, ammonia-based cleaners) as these can permanently damage the acrylic surface and its glossy finish.
• Stain Removal: For stubborn stains, use a cleaner specifically formulated for acrylic bathtubs. Always test the cleaner on an inconspicuous area first to ensure it does not cause discoloration or damage.
• Prevent Scratches: Avoid dropping sharp or heavy objects into the bathtub. Do not use the bathtub as a surface for cutting or placing rough items.
• Drain Maintenance: Periodically remove and clean the pop-up waste and siphon components to prevent blockages caused by hair, soap scum, and other debris. This ensures efficient drainage.
• Water Temperature: While acrylic is durable, prolonged exposure to extremely hot water (above 60°C / 140°F) should be avoided as it can potentially affect the material over time.

8. Troubleshooting

Here are solutions to common issues you might encounter:

• Slow Drainage:
  Check: The pop-up waste or siphon may be clogged with hair or soap residue.
  Solution: Remove and clean the pop-up waste and siphon. A plumbing snake can be used carefully if the blockage is further down the drainpipe.
• Leaks Around Connections:
  Check: Connections at the siphon, overflow, or waste assembly.
  Solution: Ensure all connections are tightened properly. Replace any worn or damaged seals or plumbing tape. If the leak persists, consult a qualified plumber.
• Minor Surface Scratches:
  Check: Superficial scratches on the acrylic surface.
  Solution: Small scratches can often be buffed out using a fine automotive polishing compound designed for acrylic, followed by an acrylic polish. For deeper scratches, professional repair may be required.
• Water Temperature Issues:
  Check: This bathtub does not include a faucet. Water temperature issues are related to your external plumbing and faucet.
  Solution: Refer to your faucet's instruction manual or consult a plumber for issues related to water temperature or flow.

9. Warranty and Support

For detailed warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or visit the official Vente-unique website. If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Vente-unique customer service directly.

You can also find additional information and products on the Vente-unique Brand Store.

10. Product Overview

The Vente-unique DIVINA semi-island bathtub offers a contemporary design with practical features, making it a stylish and functional addition to your bathroom space.

Front view of the DIVINA bathtub, showcasing its sleek white acrylic finish and semi-island design, ideal for modern bathrooms.

Side view of the DIVINA bathtub, illustrating its gently curved profile and compact footprint, suitable for various bathroom layouts.

The DIVINA bathtub elegantly integrated into a modern bathroom, demonstrating its aesthetic appeal and how it complements contemporary decor.