1. Introduction
Product Overview
The Vente-unique LENVIA Daybed with Trundle is designed for both style and functionality, offering a versatile sleeping solution. Its minimalist and rounded design, upholstered in taupe velvet, allows it to seamlessly integrate into various interior styles, creating a serene and relaxing sleep space. This daybed includes a trundle bed, providing an additional sleeping area for guests.
Safety Warnings
- Assemble with care to prevent injuries.
- Do not exceed the maximum supported load of 110 kg (242 lbs) for each bed.
- Be cautious of sharp edges during assembly and use.
- Ensure all connections are securely fastened before use.
- Keep small parts away from children during assembly.
2. Package Contents
Please verify that all packages have been delivered and are in good condition before proceeding with assembly. The LENVIA Daybed is delivered in two packages:
| Package | Dimensions (L x W x H) | Weight |
|---|---|---|
| Package N°1 | 99 cm x 95 cm x 15 cm | 20 kg |
| Package N°2 | 211 cm x 36 cm x 13 cm | 31 kg |
The daybed is delivered without mattresses but includes the slat base for both the main bed and the trundle.
3. Setup and Assembly
The LENVIA Daybed requires self-assembly. It is recommended to assemble the product in the room where it will be used. Ensure you have enough space and a clean, flat surface for assembly. Two people are recommended for easier and safer assembly.
Assembly Steps (General Guidance):
- Unpack Components: Carefully unpack all parts from both packages. Lay them out on a soft, clean surface to prevent scratches. Identify all components against the parts list (not provided, but implied).
- Assemble Main Frame: Begin by assembling the main frame of the daybed. Connect the side panels to the headboard and footboard using the provided hardware. Ensure all connections are finger-tight before fully tightening.
- Install Slat Base: Once the main frame is stable, install the poplar wood slat base into the designated supports. Ensure all slats are properly seated and secured.
- Assemble Trundle Drawer: Assemble the trundle drawer, which operates on wheels. Attach the wheels to the bottom of the trundle frame.
- Insert Trundle Slat Base: Install the slat base for the trundle bed.
- Final Tightening: Once all components are in place, carefully tighten all screws and bolts. Do not overtighten.
- Positioning: Place the assembled daybed in its desired location.
Figure 3.1: The LENVIA Daybed fully assembled, showcasing its elegant design and velvet upholstery.
Figure 3.2: View of the daybed's internal structure, highlighting the sturdy slat base.
Figure 3.3: The front view of the daybed, illustrating the pull-out trundle drawer.
4. Operating Instructions
Using the Trundle Bed
The LENVIA Daybed features a convenient pull-out trundle bed, perfect for accommodating an additional guest. The trundle operates on wheels for smooth movement.
- To Extend: Gently pull the trundle drawer from underneath the main daybed. The wheels will allow it to slide out easily.
- To Retract: Push the trundle drawer back into its position under the main daybed until it is fully concealed.
Both the main bed and the trundle bed are compatible with 90x190 cm mattresses (not included).
Figure 4.1: The trundle bed extended, ready for use.
Figure 4.2: The daybed in a room, with the trundle extended for guest accommodation.
5. Maintenance
Care and Cleaning
- Velvet Upholstery: Regularly vacuum the velvet upholstery using a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner. Avoid direct sunlight to prevent fading.
- Wood Components: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Dry immediately with a clean cloth.
- General Care: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
6. Troubleshooting
If you encounter any issues with your LENVIA Daybed, please refer to the following general troubleshooting tips:
- Squeaking Noises: Check all assembly hardware. Tighten any loose screws or bolts. Ensure the slat base is properly seated.
- Trundle Not Sliding Smoothly: Inspect the wheels on the trundle for any obstructions or damage. Clean the floor area where the trundle slides.
- Stability Issues: Re-check all connections and ensure they are fully tightened. Make sure the daybed is placed on a flat, even surface.
If the problem persists, please contact Vente-unique customer support for assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vente-unique |
| Model | LENVIA |
| Color | Taupe |
| Material | 100% Polyester Velvet |
| Structure | Particle board, MDF |
| Slat Base Type | Poplar wood slats (13 slats) |
| Overall Dimensions (L x D x H) | 207 cm x 96.5 cm x 81.2 cm (81.5" x 38" x 32") |
| Sleeping Dimensions (Main & Trundle) | 90 x 190 cm (35.4" x 74.8") |
| Sleeping Height | 35 cm (13.8") |
| Trundle Drawer Dimensions (L x D x H) | 100 cm x 90 cm x 23 cm (39.4" x 35.4" x 9.1") |
| Maximum Supported Load | 110 kg (242 lbs) |
| Total Product Weight | 51 kg (112.4 lbs) |
| Eco-responsible Product | PEFC certified base, slats from sustainably managed forests |
8. Warranty and Support
For any questions regarding assembly, operation, or maintenance of your LENVIA Daybed, please contact Vente-unique customer support. Please have your product model (LENVIA) and purchase information ready when contacting support.
Vente-unique is committed to customer satisfaction. For detailed warranty information, please refer to the terms and conditions provided at the time of purchase or visit the official Vente-unique website.
Contact Information:
- Website: www.vente-unique.com (Please check your regional Vente-unique website for specific contact details)
- Customer Service: Refer to your purchase documentation or the Vente-unique website for phone numbers and email support.
