AOOGITF S5
AOOGITF S5 Stainless Steel Pet Water Fountain
User Instruction Manual
Introduction
The AOOGITF S5 Stainless Steel Pet Water Fountain is designed to provide a continuous supply of fresh, filtered water for your pets. Constructed from durable 304 stainless steel, it offers a hygienic and long-lasting solution for pet hydration. The fountain features a quiet pump and a multi-layered filtration system to ensure clean drinking water, promoting your pet's health and encouraging increased water intake.
Package Contents
Please verify that all components are present before assembly:
- Stainless Steel Water Bowl
- Fountain Lid with Faucet Spout
- Water Pump
- Activated Carbon Filter
- Filter Sponge
- Power Adapter (USB cable with wall charger part)

Image: All components of the AOOGITF S5 Stainless Steel Pet Water Fountain, including the stainless steel bowl, lid, faucet, pump, filter, sponge, and power adapter.
Setup Instructions
- Clean Components: Wash all parts (stainless steel bowl, lid, faucet, pump, filter housing) thoroughly with water and mild soap before first use. Rinse well.
- Assemble Filter: Place the filter sponge around the pump base. Insert the activated carbon filter into its designated slot in the lid assembly.
- Install Pump: Secure the water pump into the designated area on the underside of the fountain lid. Ensure the faucet spout is correctly attached to the pump outlet.
- Fill Water Bowl: Place the stainless steel bowl on a flat, stable surface. Fill the bowl with clean water up to the maximum fill line (approximately 2.2 liters).
- Place Lid: Carefully place the lid assembly onto the stainless steel bowl, ensuring the power cord is routed through the small notch in the base to prevent abrasion.
- Connect Power: Plug the USB power cable into the wall adapter, then plug the adapter into a standard electrical outlet. The fountain will begin operating.

Image: The AOOGITF S5 Stainless Steel Pet Water Fountain fully assembled and operating, with water flowing from the faucet spout into the bowl.
Operating Instructions
- Continuous Operation: The fountain is designed for continuous operation to provide fresh water 24/7.
- Water Level: Monitor the water level daily. The fountain has a 2.2-liter (74oz) capacity, which can last approximately one week for a single adult cat. Refill as needed to prevent the pump from running dry.
- Refilling: To refill, unplug the power cord, carefully lift the lid/pump assembly, and add fresh water to the bowl. Tilt the lid slightly to allow any trapped water to drain back into the base before fully removing it.

Image: A cat near the AOOGITF S5 fountain, highlighting its 2.2L capacity, sufficient for extended periods.
Maintenance
Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your fountain.
- Weekly Cleaning: Disassemble all parts and wash them with water and mild soap. Rinse thoroughly. The stainless steel components are machine washable (dishwasher safe).
- Filter Replacement: Replace the activated carbon filter every 2-4 weeks, depending on the number of pets and water quality. Replace the filter sponge every 1-2 months or when visibly dirty.
- Pump Cleaning: Periodically clean the pump to remove any hair or debris that may affect its performance. Refer to the pump's specific instructions for detailed cleaning steps.

Image: A person cleaning the disassembled parts of the AOOGITF S5 fountain under running water, demonstrating ease of cleaning.

Image: An illustration detailing the multi-layered filtration system, including the high-density sponge filter, coconut shell activated carbon, and ion exchange resin.
Troubleshooting
- Fountain is noisy:
- Check the water level. If the water level is too low, the pump may make noise. Refill the fountain.
- Clean the pump. Debris or hair can obstruct the impeller, causing noise. Disassemble and clean the pump thoroughly.
- Water flow is weak or stopped:
- Ensure the water level is sufficient.
- Check for blockages in the pump or faucet spout. Clean any obstructions.
- Replace the filter. A clogged filter can restrict water flow.
- Inspect the pump for damage. If the pump is faulty, it may need replacement.
- Algae or slime buildup:
- Increase cleaning frequency. Weekly cleaning is recommended, especially in warmer climates.
- Ensure the fountain is not exposed to direct sunlight, which can promote algae growth.
Specifications
| Feature | Detail |
|---|---|
| Model | S5 |
| Material | 304 Stainless Steel |
| Capacity | 2.2 Liters (74 oz) |
| Dimensions (L x W x H) | 7.48 x 6.3 x 4.33 inches |
| Item Weight | 1.5 pounds |
| Pump Voltage | 5V |
| Noise Level | Ultra-quiet (approx. 20-25 dB during normal operation) |
Warranty and Support
The AOOGITF S5 Pet Water Fountain comes with a one-year warranty service. If you encounter any problems during use, please contact our customer support team for assistance.
Customer Support Email: AOOGITF@520service.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.