Timco RSM-1310 Rechargeable Electric Shaver User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Timco RSM-1310 Rechargeable Electric Shaver. Please read this manual thoroughly before first use and keep it for future reference.

Safety Information

It is important to follow all safety precautions to prevent injury or damage to the device.

• Keep the shaver in a cool, dry place.
• This appliance is designed for dry use only. Do not use it in the shower or with water.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the shaver yourself. Contact qualified personnel for service.
• Ensure the charging cable is not damaged before use.

Package Contents

Verify that all items are present in the package:

• 1 x Timco RSM-1310 Electric Shaver
• 1 x Charging Cable
• 1 x Cleaning Brush
• 1 x Extra Set of Blades
• 1 x Protective Cap

Image: Included accessories for the Timco RSM-1310 electric shaver, featuring the charging cable, cleaning brush, and a protective cap for the shaver head.

Setup and Initial Charging

Before using your shaver for the first time, it requires an initial charge.

1. Connect the charging cable to the shaver and then to a power outlet.
2. For the first charge, allow the shaver to charge for 12 hours.
3. Subsequent charges will require approximately 8 hours.
4. Ensure the shaver is turned off during charging.

Image: Front view of the Timco RSM-1310 electric shaver, highlighting the power button and the blue charging indicator light at the bottom.

Operating Instructions

Shaving

The Timco RSM-1310 is designed for dry shaving. Its dual linear floating stainless steel blades adapt to facial contours for a close shave.

1. Ensure your face is clean and dry before shaving.
2. Press the power button to turn on the shaver.
3. Hold the shaver at a right angle to your skin and move it against the direction of hair growth.
4. Stretch your skin with your free hand to ensure a smooth surface for the shaver.
5. Apply gentle pressure; do not press too hard.
6. After shaving, press the power button to turn off the shaver.

Image: Angled view of the Timco RSM-1310 electric shaver, clearly displaying its dual foil shaving head designed for efficient hair removal.

Using the Pop-Up Trimmer

The integrated pop-up trimmer is ideal for shaping sideburns, mustaches, and beards.

1. Locate the trimmer release button on the back of the shaver.
2. Slide the button upwards to deploy the pop-up trimmer.
3. Turn on the shaver.
4. Carefully trim desired areas.
5. After use, turn off the shaver and push the trimmer back into its housing until it clicks into place.

Image: Side view of the Timco RSM-1310 electric shaver with its pop-up trimmer extended, ready for precision grooming.

Charging the Shaver

To maintain optimal performance, charge your shaver when the battery indicator shows low power.

• A full charge provides approximately 45 minutes of usage time.
• Regular charging time is 8 hours.
• Do not overcharge the battery.
• Disconnect the shaver from the power outlet once fully charged.

Maintenance

Cleaning the Shaver

Regular cleaning ensures hygiene and extends the life of your shaver.

1. Turn off and unplug the shaver before cleaning.
2. Remove the shaving head assembly.
3. Use the provided cleaning brush to remove hair clippings from the foils and cutter block.
4. Do not use water to clean the shaver head or body, as it is designed for dry use only.
5. Reattach the shaving head assembly securely.

Image: Close-up view of the Timco RSM-1310 shaver head, detailing the dual foil system and the underlying cutters, ready for cleaning.

Replacing Blades

For optimal shaving performance, it is recommended to replace the blades and foils periodically. An extra set of blades is included with your shaver.

1. Ensure the shaver is turned off and unplugged.
2. Carefully remove the old shaving head and blades.
3. Install the new set of blades and foils, ensuring they are securely seated.
4. Dispose of old blades responsibly.

Troubleshooting

If you encounter issues with your Timco RSM-1310 shaver, refer to the following common solutions:

• Shaver not turning on: Ensure the shaver is fully charged. Check the charging cable connection.
• Poor shaving performance: The blades may be dull. Replace the blades and foils. Ensure the shaver head is clean and free of hair clippings.
• Shaver stops during use: The battery may be depleted. Recharge the shaver for 8 hours.
• Unusual noise: Clean the shaver head thoroughly. Ensure all parts are correctly assembled.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Timco website. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the Timco Brand Store on Amazon.