1. Product Overview
This manual provides instructions for the GENGQIANSI replacement remote control, designed for specific Lasko heater models. This remote control offers a convenient way to operate your compatible Lasko heater from a distance.
Image 1.1: Front view of the GENGQIANSI replacement remote control.
2. Compatibility
This replacement remote control is compatible with the following Lasko heater models:
- Lasko 6435 Designer Series Oscillating Ceramic Heater
- Lasko CT30750 Tall Tower Heater
- Lasko CT30753 Tower Space Heater
No programming is required for this remote control. Ensure your original remote or heater model matches the compatible models listed above for proper function.
Image 2.1: The remote control does not require programming.
3. Setup: Battery Installation
The remote control requires two AAA 1.5V batteries (not included).
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image 3.1: Back of the remote control with the battery compartment.
Image 3.2: Required battery type: AAA 1.5V.
4. Operating Instructions
Point the remote control directly at the Lasko heater's receiver. The buttons on the remote control correspond to the following functions:
Image 4.1: Remote control button functions.
- Power Button (⏻): Turns the heater ON or OFF.
- Oscillation Function (⟳): Activates or deactivates the heater's oscillation feature.
- Heat Settings (⋮): Cycles through available heat settings (e.g., Low, High).
- Temperature Up (+): Increases the desired temperature setting.
- Temperature Down (-): Decreases the desired temperature setting.
- Timer Function (🕒): Sets or adjusts the heater's timer for automatic shut-off.
5. Maintenance
Battery Replacement
If the remote control's range decreases or it stops responding, the batteries may need to be replaced. Follow the battery installation steps in Section 3 to replace the old batteries with new AAA 1.5V batteries.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
6. Troubleshooting
- Remote not responding:
- Ensure new AAA 1.5V batteries are correctly installed.
- Check for any obstructions between the remote control and the heater's receiver.
- Ensure you are within the effective operating range of the heater.
- Heater not responding to specific buttons:
- Verify that the remote control is compatible with your specific Lasko heater model (refer to Section 2).
- Ensure the heater itself is powered on and functioning correctly.
This remote control does not require programming. If issues persist after troubleshooting, contact the seller for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | GENGQIANSI |
| Model Number | A520230313B02 |
| Compatible Devices | Lasko 6435 Designer Series Oscillating Ceramic, CT30750 Tall Tower, CT30753 Tower Space Heater |
| Connectivity Technology | Infrared |
| Max Number of Supported Devices | 1 |
| Special Feature | Ergonomic |
| Item Weight | 0.634 ounces |
| Package Dimensions | 6.14 x 3.27 x 0.94 inches |
8. Warranty and Support
For warranty information or product support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt for any warranty claims.