Introduction
Thank you for choosing the Rowenta X-Force Flex 12.60 Allergie cordless stick vacuum cleaner. This manual provides essential information for the safe and efficient use, assembly, operation, and maintenance of your appliance. Please read it carefully before first use and keep it for future reference.
Safety Instructions
Before using the appliance, please refer to the product's instruction manual or safety book for detailed safety warnings and guidelines. Always ensure the appliance is unplugged before performing any maintenance or cleaning. Do not use the appliance to vacuum water or wet substances. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Package Contents
Verify that all components are present in the package:
- Main unit (motorized body with dust bin)
- Flex tube extension
- Motorized brush head with LED lighting
- Battery pack
- Charging base / Docking station
- Crevice tool
- Upholstery brush
- 2-in-1 Easy Brush (x2)
- Additional filter
- Power adapter

Image: All included accessories for the Rowenta X-Force Flex 12.60 vacuum cleaner, including brushes, tools, and the docking station.
Assembly
- Attach the Flex Tube: Insert the Flex tube extension into the main unit until it clicks securely into place.
- Connect the Brush Head: Attach the motorized brush head to the other end of the Flex tube, ensuring it locks firmly.
- Install the Battery: Slide the battery pack into its designated slot on the main unit until it clicks.
- Set up the Docking Station: Place the docking station in a convenient location near a power outlet. The vacuum can be stored and charged on this station.

Image: The Rowenta X-Force Flex 12.60 vacuum cleaner assembled and stored on its docking station, with various accessories organized.
Charging
Before first use, fully charge the battery. The battery can be charged while attached to the vacuum on the docking station, or separately.
- Place the vacuum on the docking station, ensuring the charging contacts align.
- Connect the power adapter to the docking station and then to a wall outlet.
- The digital control screen will indicate the charging status. A full charge provides up to 45 minutes of autonomy (in Eco mode).

Image: The Rowenta X-Force Flex 12.60 vacuum cleaner in use, demonstrating its versatility for cleaning both high and low areas, highlighting its long battery life.
Operating Instructions
Power On/Off and Mode Selection
Press the power button to turn the vacuum on or off. Use the digital control screen to select from 4 different power modes: Eco, Max, and Boost. The vacuum also features an automatic power adjustment based on floor type.

Image: The Rowenta X-Force Flex 12.60 vacuum cleaner's brush head on a carpet, with an overlay indicating automatic power adjustment for optimal cleaning.
Flex Tube Technology
The Flex tube allows you to clean under low furniture without bending down. Simply press the dedicated button on the tube to activate the flexible joint.

Image: A person using the Rowenta X-Force Flex 12.60 vacuum cleaner, demonstrating how the flexible tube bends to reach under a low coffee table without requiring the user to stoop.
LED Lighting
The motorized brush head is equipped with LED lights to illuminate dark areas, making hidden dust visible and ensuring thorough cleaning.
Using Accessories
Attach the appropriate accessory for specific cleaning tasks:
- Crevice Tool: Ideal for narrow spaces, corners, and edges.
- Upholstery Brush: Designed for cleaning sofas, chairs, and other fabric surfaces.
- Easy Brush: Integrated brushes for quick cleaning of delicate surfaces or furniture.
Maintenance
Emptying the Dust Bin
The 0.9 L dust bin should be emptied regularly to maintain optimal suction performance. It is easy to detach and 100% washable.
- Ensure the vacuum is turned off and disconnected from the charger.
- Press the release button to detach the dust bin from the main unit.
- Open the dust bin lid and empty the contents into a waste bin.
- Rinse the dust bin and separator with water if necessary, and allow them to dry completely before reassembling.
Cleaning the Filters
The vacuum includes two washable filters and one high-efficiency filter. Regular cleaning is essential for maintaining filtration performance, especially for allergen capture.

Image: An internal diagram of the Rowenta X-Force Flex 12.60 vacuum cleaner's filtration system, highlighting its ability to capture 99.9% of fine particles and allergens.
- Remove the dust bin as described above.
- Locate and remove the filters.
- Tap the filters to remove loose dust. For a deeper clean, rinse them under cold running water.
- Allow the filters to air dry completely for at least 24 hours before placing them back into the vacuum. Do not use a dryer or other heating devices.
Cleaning the Brush Roll
Hair and debris can get tangled in the brush roll. Clean it periodically to ensure effective cleaning.
- Turn off the vacuum and detach the brush head.
- Use a coin or screwdriver to unlock the brush roll cover.
- Remove the brush roll and carefully cut away any tangled hair or fibers using scissors.
- Clean the brush roll and its housing. Reassemble once clean.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Battery not charged or incorrectly installed. | Ensure battery is fully charged and correctly inserted. |
| Reduced suction power | Dust bin full, filters clogged, or brush roll tangled. | Empty dust bin, clean filters, and remove debris from brush roll. |
| Brush head stops rotating | Obstruction in the brush roll or safety mechanism activated. | Turn off the vacuum, remove any obstructions from the brush roll, then restart. |
| Short battery life | Using Boost mode frequently or battery degradation. | Use lower power modes for general cleaning. If battery life significantly decreases, consider replacing the battery. |
Specifications
- Brand: Rowenta
- Model Number: RH98A0WO
- Color: Violet and Aluminum
- Product Dimensions (L x W x H): 77.4 x 22 x 33.8 cm
- Weight: 3.2 Kilograms
- Power: 320 Watts (up to 150 Air Watts suction)
- Number of Speeds: 4 (Eco, Max, Boost, Auto)
- Noise Level: 82 Decibels
- Autonomy: Up to 45 minutes
- Dust Bin Capacity: 0.9 L
- Filter Type: 2 washable filters + 1 high-efficiency filter
- Special Features: Bagless, Docking Station, Flex Tube, Motorized brush head with LED lighting

Image: A diagram showing the key dimensions of the Rowenta X-Force Flex 12.60 vacuum cleaner, including height, width, and depth.
Warranty and Repairability
Rowenta is committed to making spare parts available for 15 years after purchase for the majority of its products, at a fair price. This commitment contributes to environmental protection and waste reduction.

Image: Logo indicating Rowenta's commitment to 15 years of repairability at a fair price.





