ODK 66" L Shaped Gaming Desk Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your ODK 66" L Shaped Gaming Desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information

• Always secure the desk to the wall to prevent tipping.
• Be cautious when using the electrical components and do not overload the outlets.
• Never leave the LED lights on unattended.
• Always follow the assembly instructions carefully to ensure the desk is stable and safe to use.

Parts List

Please verify all parts are present and in good condition before assembly. Refer to the included hardware pack for specific screw types and quantities.

• Desk Boards (A, B)
• Frame Components (G, K, L, E, D, F, J, I, H)
• Shelves (O, P, M, N)
• CPU Stand (U, C)
• Monitor Stand Components (W, X, Y, Z, R, Q)
• Power Outlet Unit (V)
• LED Light Strips (10)
• Wire Clips (11)
• Foot Pads (1)
• Screws (2, 3, 4, 5, 6, 7, 8)

Assembly Instructions

Recommended: Two people for assembly.

Watch the full assembly video for a visual guide:

Video Description: A comprehensive tutorial demonstrating the step-by-step assembly of the ODK L Shaped Gaming Desk.

Step 1: Assemble the Base Frames

Install foot pads (1) on each frame part (G, K, L, E, D, H). Attach part H to part G using screws (4).

Step 2: Assemble the Side Shelf Unit

Ensure part D is on the right of part E. Use screws (4) to install parts D and E onto the mesh shelves P and O.

Step 3: Connect the Side Shelf Unit to the Main Frame

Pay attention to the direction of the screw holes on part F. Use screws (4) to install part F onto parts G and D.

Step 4: Install the CPU Stand and Shelves

Use screws (6) to install the two shelves (C) into the frame. Use screws (3) to install the CPU stand (U). Note: Part U is a supporting part designed to prevent damage to Part C due to excessive loading and doesn't normally contact the floor.

Step 5: Assemble the Other Side Shelf Unit

Use screws (4) to install mesh shelves (M) on frame parts K and L. Note: The height of M can be adjusted according to your preference.

Step 6: Connect the Main Desk Frame

Pay attention to the direction of the screw holes on parts G and K. Use screws (4) and (2) to install connecting bars J and I onto the two shelf units.

Step 7: Install the Cross Braces

Use screws (2) to install the cross braces (T) to the main frame for added stability.

Step 8: Attach the Desk Boards

Install all screws (3) on the desk boards (A and B) first. Then, tighten the screws after ensuring parts A and B are perfectly aligned on the frame.

Step 9: Install Additional Shelves

Use screws (4) to install the additional mesh shelves (N) into the side frame.

Step 10: Install the Monitor Stand Supports

Use screws (7) to install supports (Z) on monitor stand boards W and Y. Use screws (8) to install supports (R) on monitor stand boards W and Y.

Step 11: Connect Monitor Stand Boards

Use screws (7) to connect monitor stand boards W, X, and Y together with connecting bar Q. Tighten all screws after ensuring W, X, and Y are perfectly aligned.

Step 12: Prepare LED Light Strips

Apply 3M adhesive to the back of the light strip (10), taking care to stick it so as not to block the light emitting from it.

Step 13: Attach LED Light Strips

Attach the light strip (10) to the monitor stand bracket and secure the light wire with the wire clip (11).

Step 14: Install the Monitor Stand

Gently flip the assembled monitor stand bracket over and install it onto the main desk tabletop using screws (3).

Assembly Complete

Your ODK 66" L Shaped Gaming Desk is now fully assembled.

Image Description: A fully assembled ODK 66 inch L Shaped Gaming Desk, showcasing its complete structure.

Operating Instructions

LED Lights

The built-in LED lighting system features 10 colors, 10 lighting modes, 8 adjustable brightness levels, and 9 flicker frequencies. It includes a memory function to recall the last used setting when turned on.

Image Description: The ODK L Shaped Gaming Desk illuminated by its integrated LED lights, displaying a range of colors and dynamic effects.

Power Outlet and USB Ports

The desk is equipped with 3 standard AC plug outlets and 2 USB ports for convenient charging of laptops, phones, and gaming gear.

Image Description: A close-up view of the built-in power outlet strip on the desk, showing three AC outlets and two USB ports with devices charging.

Maintenance

• Regularly wipe down the desk surfaces with a soft, damp cloth. Avoid harsh chemicals.
• Check all screws and connections periodically and tighten if necessary to maintain stability.
• Keep liquids away from electrical components.
• Do not place excessively hot items directly on the desk surface without protection.

Troubleshooting

Stability Issues

If the desk feels wobbly, ensure all screws are securely tightened. Verify that the adjustable foot pads are properly leveled on uneven floors.

LED Lights Not Working

Check the power connection to the LED strip. Ensure the remote control battery is functional. If issues persist, consult the manufacturer.

Power Outlets/USB Ports Not Functioning

Verify the main power cord is securely plugged into a working wall outlet. Check for tripped circuit breakers. Do not overload the outlets.

Specifications

Warranty and Support

Warranty Information

This product comes with a Limited Warranty. For specific details regarding coverage and duration, please refer to the warranty card included in your product packaging or contact ODK customer service.

Customer Support

For any questions, missing parts, or assistance with assembly, please contact ODK customer support.

Visit the ODK Store on Amazon