Introduction
This manual provides detailed instructions for the GENGQIANSI Remote Control, model A520230309B11. This remote is designed for use with various Aux Room AC Air Conditioner models, including YKR-H/006E, ASW-H12A3/FFR1, ASW-H12U3/JIR1D1-US-D, ASW-H24N2/JIR1D1-US-B, and ASW-H12U3/JIR1D1A230. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.
Setup
1. Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install them:
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Close the battery compartment cover securely.
Note: Remove batteries if the remote control will not be used for an extended period to prevent leakage.
2. Wall Mount Case Installation
A wall mount case is included for convenient storage of your remote control. To install:
- Choose a suitable location on a wall, away from direct sunlight or heat sources.
- Use screws (not included) to secure the wall mount case to the desired position.
- Ensure the case is firmly attached before placing the remote control inside.
Image: The GENGQIANSI remote control shown alongside its white wall mount case. The remote features a display screen and various control buttons for air conditioner functions. The wall mount case is designed to hold the remote securely on a wall.
Operating Instructions
This section details the functions of each button on your remote control.
Image: Close-up of the GENGQIANSI remote control, displaying its LCD screen and various function buttons. The screen shows "SET TEMPERATURE" and "26°C" with indicators for AUTO, COOL, DRY, HEAT, FAN, HIGH, MID, LOW modes.
Button Functions:
- ON/OFF (Red Button): Powers the air conditioner on or off.
- SET Temperature (Up/Down Arrows): Adjusts the desired temperature. The display shows the set temperature.
- SET (Button below temperature arrows): Confirms a setting, often used with timer functions.
- MODE: Cycles through operating modes:
- AUTO: Automatically selects the operating mode based on room temperature.
- COOL: Provides cooling.
- DRY: Reduces humidity in the room.
- HEAT: Provides heating (if supported by AC unit).
- TURBO: Activates rapid cooling or heating for a short period.
- SPEED: Adjusts the fan speed (HIGH, MID, LOW, or AUTO).
- SLEEP: Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep and energy saving.
- °C/°F: Toggles the temperature display between Celsius and Fahrenheit.
- DISPLAY: Turns the display on the AC unit on or off.
- SWING (Vertical): Controls the vertical swing of the air deflector.
- SWING (Horizontal): Controls the horizontal swing of the air deflector.
- iFEEL: Activates the "I Feel" function, which measures the temperature at the remote control's location and adjusts the AC unit accordingly for localized comfort.
- Anti-F (Anti-Fungus): Activates a function to prevent mold and mildew growth.
- ELE.H (Electric Heating): Activates electric heating function (if available on AC unit).
- HEALTH: Activates health-related functions, such as air purification or ionizer (if available on AC unit).
- TIMER: Sets the timer for automatic on/off operations.
- ECO: Activates energy-saving mode.
- iCLEAN: Initiates a self-cleaning function for the indoor unit.
Maintenance
1. Cleaning the Remote Control
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical sprays, as these can damage the remote's surface or internal components.
2. Battery Replacement
Replace batteries when the remote's display becomes dim or the remote control range decreases significantly. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries or different types of batteries.
3. Storage
If the remote control will not be used for an extended period, remove the batteries to prevent potential leakage and damage. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly installed batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Remote control range is poor. | Weak batteries; obstruction between remote and AC unit. | Replace batteries. Ensure there are no obstacles blocking the infrared signal path to the AC unit. |
| AC unit does not respond to specific functions. | Function not supported by your specific AC model. | Refer to your AC unit's manual to confirm supported features. |
Specifications
- Model Number: A520230309B11
- Brand: GENGQIANSI
- Compatible Devices: Aux Room AC Air Conditioners (YKR-H/006E, ASW-H12A3/FFR1, ASW-H12U3/JIR1D1-US-D, ASW-H24N2/JIR1D1-US-B, ASW-H12U3/JIR1D1A230)
- Connectivity Technology: Infrared
- Color: White
- Item Weight: 1.06 ounces
- Package Dimensions: 0.39 x 0.2 x 0.08 inches
- Special Feature: Ergonomic design
Warranty & Support
Warranty Information
Specific warranty details for this product are typically provided by the retailer or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the seller for information regarding warranty coverage and terms.
Customer Support
For technical assistance or further inquiries, please contact the seller or the manufacturer, GENGQIANSI. Contact information can usually be found on the product packaging or the retailer's website.