Introduction
Thank you for choosing the ANLAN EMS Eye Beauty Device. This device is designed for intensive care of the eye and mouth areas, offering a combination of EMS (Electrical Muscle Stimulation), thermal care, micro-vibration, ion induction, and 2-color LED light therapy. Its compact and lightweight design allows for focused treatment and portability.
Image: The ANLAN EMS Eye Beauty Device, showing two units (one with red LED, one with blue LED) and its white charging base.
Key Features
- Multi-functional Care: Combines EMS, hot heat (thermal care), micro-vibration, ion induction, and 2-color LED (Red and Blue) for comprehensive treatment.
- Targeted Application: Smaller design specifically for detailed care around the eyes and mouth.
- 2-Color LED & Modes:
- Mode 1 (Red LED): Red LED + Warm + Micro Vibration + Ion induction. Ideal for moisturizing care.
- Mode 2 (Blue LED): Blue LED + Hot Heat + EMS. Ideal for lifting care.
- Bipolar Head Technology: Features a unique bipolar head design that maximizes EMS energy efficiency and ensures comfortable heat transfer. This design allows for direct contact operation without needing to touch a separate conductive plate.
- High-Frequency Vibration: Delivers delicate 16,000 times/minute vibrations to stimulate deep into the skin, aiding in product absorption and skin tightening.
- Portable & Rechargeable: USB rechargeable and super lightweight (55g), making it convenient for use anytime, anywhere, including travel.
Image: Illustration of Moisturizing Mode (Mode 1) with Red LED, showing vibration, ion introduction, thermal function, and red light therapy. Recommended for use with eye cream.
Image: Illustration of EMS Lifting Mode (Mode 2) with Blue LED, showing EMS microcurrent, thermal function, and blue light therapy. Recommended for use with gel or water-soluble cosmetics.
Image: Comparison of the device's bipolar head technology (left) which allows direct contact operation, versus traditional monopolar heads (right) that require touching a conductive plate for EMS to function.
Setup and Charging
1. Unboxing
Carefully remove the ANLAN EMS Eye Beauty Device and all accessories from the packaging. Ensure all components are present: the device, charging cable, and charging base.
2. Initial Charge
Before first use, fully charge the device. Connect the USB charging cable to the charging base and plug the other end into a compatible USB power adapter (not included) or a computer USB port. Place the device onto the charging base. The indicator light will show charging status (refer to the device's specific light indicators for full charge notification). A full charge allows for extended use.
Operating Instructions
1. Preparation for Use
Cleanse your face thoroughly. Apply a suitable gel, serum, or water-soluble cosmetic product to the area you intend to treat (eyes or mouth). This is crucial for effective ion induction and EMS function, and to ensure smooth gliding of the device.
2. Power On/Off and Mode Selection
Press and hold the power button to turn the device on. Short press the power button to cycle through the available modes:
- Mode 1 (Red LED): Activates Red LED, Warm function, Micro Vibration, and Ion induction. Recommended for moisturizing and nutrient absorption.
- Mode 2 (Blue LED): Activates Blue LED, Hot Heat, and EMS. Recommended for lifting and firming.
The EMS function has three adjustable levels. Use the dedicated EMS level button to select your desired intensity.
Image: A woman demonstrating the use of the ANLAN EMS Eye Beauty Device on her eye area, highlighting the EMS mode with three adjustable levels. Before and after images illustrate potential improvements in eye area appearance.
3. Application Technique
Gently glide the device head over the desired areas (around the eyes, mouth, or other facial contours). The device is designed with a 45-degree tilt angle for optimal contact and effectiveness on these specific areas. Apply light pressure and move the device slowly. A typical session duration is 10 minutes per area daily.
Image: Illustration demonstrating the optimal 45-degree tilt angle of the device head for effective contact and treatment around the eyes and mouth, based on modern human engineering design.
4. Post-Treatment
After use, turn off the device by pressing and holding the power button. Clean the device head as per the maintenance instructions.
Maintenance and Care
1. Cleaning the Device
After each use, gently wipe the device head with a soft, damp cloth or a cotton pad. Do not use abrasive cleaners, alcohol, or harsh chemicals. Ensure no liquid enters the charging port or other openings.
2. Storage
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is low or depleted. | Charge the device fully using the provided USB cable and charging base. |
| Do not feel EMS sensation. | Skin may be dry; insufficient conductive medium. | Ensure your skin is adequately moisturized. Apply a generous amount of gel, serum, or water-soluble cosmetic product before use. Increase EMS intensity level if needed. |
| Device not charging. | Improper connection; faulty cable/adapter. | Check if the USB cable is securely connected to both the charging base and the power source. Ensure the device is correctly placed on the charging base. Try a different USB adapter or port. |
Product Specifications
| Brand | ANLAN |
| Model Number | 08-AMYY212 |
| Item Weight | 55 g (device only), 120 g (package) |
| Package Dimensions | 14.9 x 7.8 x 4.2 cm |
| Power Source | USB Rechargeable |
| Vibration Frequency | 16,000 times/minute |
| LED Colors | Red, Blue |
| Skin Type Compatibility | All |
Warranty and Support
The ANLAN EMS Eye Beauty Device comes with a one-year warranty from the date of purchase. If you encounter any issues or problems with the product within 365 days of purchase, please contact ANLAN customer support through the inquiry page of your order. We are committed to providing assistance, including new shipping or exchange, as needed.
For more information about ANLAN products, you may visit the official website: https://anlan.co.jp
