1. Product Overview
The VAXCEL Bronze Motion Sensor Dusk to Dawn Outdoor Security Flood Light (Model T0695) is designed to provide reliable and efficient outdoor illumination with advanced security features. This fixture integrates a 180-degree motion sensor and a dusk-to-dawn photocell, offering automated lighting solutions for enhanced safety and energy savings. Its durable, weather-resistant construction ensures long-lasting performance in various outdoor environments.
Figure 1: VAXCEL Bronze Motion Sensor Dusk to Dawn Outdoor Security Flood Light, front view.
2. Key Features
- 180-Degree Motion Sensor: Automatically activates the light when movement is detected within a 70-foot adjustable range, providing broad coverage for security.
- Dusk-to-Dawn Photocell: Automatically turns the fixture on at dusk and off at dawn, optimizing energy use and ensuring continuous security.
- Dual-Level Brightness: Features two levels of illumination: a low-level standby at approximately 30% brightness and a high-level at 100% upon motion detection.
- Multiple Operating Modes: Offers 5 automatic modes for customizable lighting behavior, adapting to various security and convenience needs.
- Adjustable Light Heads and Sensor: Both light heads and the motion sensor can be rotated for precise direction of light and detection area.
- Flexible Mounting Options: Designed for versatile installation on either walls or eaves.
- Durable Construction: Made from weather-resistant plastic, suitable for outdoor wet locations.
Figure 2: Illustration of the three primary lighting modes: Motion Sensor, Dusk to Dawn, and Switch Controlled.
Figure 3: Depiction of the 180-degree motion detection angle and up to 70-foot range.
3. Setup and Installation
This flood light is designed for hardwired installation and can be mounted on a wall or eave. For detailed installation instructions, please refer to the official Installation Manual (PDF) available at https://manuals.plus/m/9d44b61a063de19887c2155d45de251f97b631eb34f38b1161f66cfc1d8953ff.
3.1. Components Included
- Shade
- Mounting Hardware
3.2. Bulbs (Not Included)
The fixture requires two (2) 150-watt PAR 38 medium base E26 screw-in bulbs. LED compatible bulbs can also be used for energy efficiency.
3.3. Mounting Options
The fixture offers flexible mounting for both wall and eave installations. Ensure the mounting surface is secure and capable of supporting the fixture's weight.
Figure 4: VAXCEL flood light installed on an exterior wall, demonstrating typical placement.
Figure 5: Illustration of flexible mounting options, including wall mount and eave mount, with rotating light heads and sensor joint.
4. Operating Instructions
The VAXCEL flood light features advanced controls for customized security and illumination.
4.1. Motion Sensor Operation
The 180-degree motion sensor automatically turns the light on to 100% brightness when motion is detected within its 70-foot range. The sensor's sensitivity and shut-off delay (5 seconds to 3 minutes) can be adjusted to suit your needs.
4.2. Dusk-to-Dawn Functionality
The integrated photocell detects ambient light levels. It automatically turns the fixture on when it gets dark and off when it becomes light, ensuring the light operates only when needed and saving energy during daylight hours.
4.3. Dual-Level Brightness and Modes
The light operates with two brightness levels: a low-level standby (approx. 30%) and full brightness (100%) upon motion detection. There are 5 automatic modes available for further customization of the light's behavior, including an early evening timer (0, 3, or 6 hours).
Figure 6: Overview of customizable settings including motion shut-off delay, motion sensitivity, early evening timer, and dual-level brightness.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your VAXCEL flood light.
5.1. Cleaning
Periodically clean the fixture's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or plastic components. Ensure the motion sensor lens and photocell are clear of dirt or obstructions for proper operation.
5.2. Bulb Replacement
To replace bulbs, ensure power to the fixture is turned off at the circuit breaker. Allow bulbs to cool before handling. Unscrew the old bulbs and screw in new 150-watt PAR 38 medium base E26 screw-in bulbs. Do not exceed the maximum wattage.
Figure 7: The flood light is designed for outdoor durability and is weather-resistant.
6. Troubleshooting
If you encounter issues with your VAXCEL flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty bulb, photocell obstructed, sensor settings. | Check circuit breaker. Replace bulbs. Clear photocell. Adjust sensor sensitivity/mode. |
| Light stays on continuously. | Sensor in test mode, continuous motion, wiring issue. | Check sensor mode. Ensure no constant motion in detection area. Verify wiring. |
| Light cycles on/off rapidly. | Interference, sensor too sensitive, light reflection. | Adjust sensor sensitivity. Reposition fixture to avoid reflections. |
| Motion sensor not detecting. | Sensor obstructed, incorrect angle, sensitivity too low. | Clear obstructions. Adjust sensor angle. Increase sensitivity. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | VAXCEL |
| Model Name | T0695 |
| Color | Bronze |
| Material | Plastic |
| Product Dimensions | 8.75"L x 11.75"W x 8.75"H |
| Item Weight | 2 Pounds |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | 150 watts (per bulb, max) |
| Bulb Base | E26 Medium |
| Number of Light Sources | 2 |
| Brightness | 1600 Lumen (total, with recommended bulbs) |
| Motion Sensor Range | 180 degrees, up to 70 feet |
| Installation Type | Wall Mounted / Eave Mounted |
| Indoor/Outdoor Usage | Outdoor |
| Water Resistance Level | Water Repellent |
| Certification | ETL Listed |
| UPC | 884656752212 |
Figure 8: Detailed product dimensions (A: 8-3/4", B: 11-3/4", C: 8-3/4").
8. Warranty and Support
The VAXCEL Bronze Motion Sensor Dusk to Dawn Outdoor Security Flood Light comes with a Limited Warranty. For specific details regarding the warranty coverage and duration, please refer to the documentation included with your product or contact VAXCEL customer support.
For further assistance, technical support, or to inquire about replacement parts, please visit the official VAXCEL website or contact their customer service department. Always provide your product model number (T0695) when seeking support.
