Introduction
Thank you for purchasing the Armitron Men's Day/Date Function Dial Leather Strap Watch, Model 20/5483. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure its longevity and accurate performance. Please read these instructions carefully before using your watch.
Product Overview
The Armitron Model 20/5483 is a classic analog watch featuring a day and date function, a durable mineral crystal lens, and a comfortable leather strap. It is powered by a reliable Japanese quartz movement.
Image 1: Front view of the Armitron Men's Day/Date Function Dial Leather Strap Watch. This image displays the black dial with day and date windows, silver-tone case, and black leather strap.
Image 2: Side view of the Armitron watch, showing the crown used for setting time and date. The watch case and the leather strap are visible.
Image 3: Back view of the Armitron watch, highlighting the stainless steel case back and the buckle closure of the leather strap.
Setup and Initial Operation
Setting the Time
- Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) out to its outermost position. You may feel a slight click.
- Rotate the crown: Turn the crown clockwise or counter-clockwise to move the hour and minute hands until the correct time is displayed. When setting the time, ensure you distinguish between AM and PM, especially when setting the date, as the date changes around midnight.
- Push in the crown: Once the time is set, push the crown back into its normal operating position. The watch will begin to run.
Setting the Day and Date
The day and date functions are typically set using the crown in a partially pulled-out position. Avoid setting the date between 9 PM and 3 AM, as this is when the watch's internal mechanism is engaged in changing the date, and manual adjustment can damage it.
- Pull out the crown to the first click: Gently pull the crown out to the first click position. This is usually the position for quick-setting the day and date.
- Adjust the Date: Turn the crown in one direction (e.g., clockwise) to adjust the date.
- Adjust the Day: Turn the crown in the opposite direction (e.g., counter-clockwise) to adjust the day of the week.
- Set to the previous day/date: It is recommended to set the day and date to the day before the current day. For example, if today is the 15th, set it to the 14th.
- Advance to current day/date: Pull the crown out to the outermost position (time setting position) and advance the time past midnight until the correct current day and date are displayed. Then, set the correct time. This ensures the day and date change at midnight.
- Push in the crown: Once the day and date are set, push the crown back into its normal operating position.
Maintenance and Care
- Cleaning: Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture. If it gets wet, allow it to air dry naturally.
- Water Resistance: This watch has a water resistance depth of 165 feet (50 meters). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid operating the crown while the watch is wet or submerged.
- Temperature: Avoid exposing your watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect the movement and battery life.
- Chemicals: Keep the watch away from chemicals such as solvents, detergents, perfumes, and cosmetics, which can damage the case, strap, or seals.
- Battery Replacement: The watch is powered by a battery. When the watch stops running, it indicates the battery needs replacement. This should be done by a qualified watch technician to ensure proper sealing and function.
Troubleshooting
- Watch not running:
- Check if the crown is fully pushed in.
- The battery may need replacement.
- Incorrect time/date:
- Refer to the "Setting the Time" and "Setting the Day and Date" sections.
- Ensure the crown is fully pushed in after adjustment.
- Condensation inside the crystal:
- This may indicate a breach in the water resistance. Have the watch inspected by a professional immediately to prevent damage to the movement.
Specifications
| Feature | Detail |
|---|---|
| Brand | Armitron |
| Model Number | 20/5483BKSVWM |
| Display Type | Analog |
| Watch Movement Type | Japanese Quartz |
| Power Source | Battery Powered |
| Case Material | Stainless Steel |
| Crystal Type | Mineral Glass |
| Case Diameter | 42 Millimeters |
| Case Thickness | 10.5 Millimeters |
| Band Material Type | Leather |
| Band Width | 22 Millimeters |
| Band Length | 9.5 Inches |
| Water Resistance Depth | 165 Feet (50 Meters) |
| Closure Type | Buckle |
| Item Weight | 0.23 Kilograms (8.11 ounces) |
Warranty and Support
Your Armitron watch comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty information provided with your purchase or visit the official Armitron website.
For technical support or service inquiries, please contact Armitron customer service through their official channels. Keep your proof of purchase for warranty claims.
Optional protection plans may be available for extended coverage:
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect (monthly plan covering multiple eligible purchases)
These plans are typically offered at the point of purchase and provide additional coverage beyond the manufacturer's limited warranty.
