Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your maxsun GeForce RTX 3060 Ti iCraft ACGN Limited Edition Graphics Card. This high-performance graphics card features the NVIDIA GeForce RTX 3060 Ti chipset with Ampere architecture, 8GB GDDR6X memory, and supports PCI Express 4.0. It is designed to deliver advanced graphics capabilities for gaming and demanding applications.
Image 1: An illustration detailing the advanced cooling system, featuring thicker fins and six liquid cooling heat pipes designed for enhanced heat transfer and lower operating temperatures.
Safety Information
- Always disconnect power from your computer before installing or removing any components.
- Handle the graphics card by its edges to avoid touching sensitive components or the PCIe connector.
- Ensure proper grounding to prevent electrostatic discharge (ESD) damage.
- Install the graphics card in a well-ventilated computer case to prevent overheating.
- Do not attempt to modify the graphics card. Unauthorized modifications may void your warranty and cause damage.
Package Contents
Verify that all items are present in your package:
- maxsun GeForce RTX 3060 Ti iCraft ACGN Limited Edition Graphics Card
- GPU holder
- Documentation (this manual)
Setup and Installation
1. Pre-installation Checks
- Power Supply: Ensure your power supply unit (PSU) meets the recommended power supply of 650W. The card requires 8-pin + 8-pin power connectors.
- Motherboard: Verify your motherboard has an available PCI Express 4.0 x16 slot.
- Case Clearance: Check your computer case for adequate space. The card dimensions are approximately 317mm x 124mm x 53mm.
2. Physical Installation
- Prepare Your System: Power off your computer and disconnect all cables. Open the computer case.
- Locate PCIe Slot: Identify an available PCI Express 4.0 x16 slot on your motherboard. Remove any expansion slot covers if necessary.
- Install Graphics Card: Carefully align the graphics card with the PCIe slot and press it down firmly until it is securely seated. Ensure the retention clip locks into place.
- Secure the Card: Use screws to secure the graphics card to the computer case's expansion slot bracket.
- Connect Power: Connect the two 8-pin PCIe power cables from your power supply to the corresponding power connectors on the graphics card.
- Install GPU Holder (Optional): If included, install the GPU holder to provide additional support for the graphics card and prevent sag.
- Close Case: Close your computer case and reconnect all cables.
Image 2: The maxsun GeForce RTX 3060 Ti iCraft ACGN Limited Edition Graphics Card alongside its distinctive retail packaging.
Image 3: Top-down view of the graphics card, highlighting its triple-fan cooling system and "iCraft" branding on the fan hubs.
Image 4: The backplate of the graphics card, featuring unique anime-style artwork and an illuminated "iCraft" logo.
Image 5: Side view of the graphics card, displaying the "GEFORCE RTX" and "iCRAFT" branding, along with the dual 8-pin power connectors.
Image 6: Angled view of the graphics card, showcasing the triple-fan design, RGB lighting accents, and the display output ports (HDMI and DisplayPort).
Image 7: Vertical view of the graphics card, emphasizing its length and the illuminated side panel with "GEFORCE RTX" and "iCRAFT" logos.
3. Driver Installation
- Power On: Turn on your computer. If the display works, proceed to the next step. If not, troubleshoot connections.
- Download Drivers: Visit the official NVIDIA website (www.nvidia.com/drivers) to download the latest GeForce Game Ready Drivers for the RTX 3060 Ti.
- Install Drivers: Run the downloaded driver installer and follow the on-screen instructions. A restart may be required.
Operating the Graphics Card
Display Connections
Connect your monitor(s) to the graphics card's output ports. This card features DisplayPort 1.4a and HDMI 2.1 ports. It supports multi-screen output, including up to 4K 12-bit HDR at 240Hz with DP1.4a+DSC, or 8K 12-bit HDR at 60Hz with DP 1.4a+DSC or HDMI2.1+DSC. With dual DP1.4a+DSC, it supports up to 8K HDR at 120Hz.
Image 8: A diagram illustrating the multi-screen output capabilities of the graphics card, supporting up to four displays via its DisplayPort and HDMI connections.
RGB Lighting Control
The iCraft ACGN Limited Edition Series features Skylight RGB lighting effects on the front, side, and backplate. Specific software for controlling these effects may be available from the manufacturer's website. Refer to the maxsun official website for any dedicated RGB control utilities.
Image 9: An illustration detailing the various RGB lighting zones on the graphics card, including the front, side, and backplate, contributing to its aesthetic appeal.
Maintenance
- Cleaning: Periodically clean dust from the fans and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning.
- Driver Updates: Regularly check the NVIDIA website for the latest graphics drivers to ensure optimal performance and compatibility.
- Temperature Monitoring: Use monitoring software to keep track of the GPU temperature, especially during heavy loads, to ensure it operates within safe limits.
Troubleshooting
- No Display Output:
- Ensure the monitor cable is securely connected to both the graphics card and the monitor.
- Verify the graphics card is fully seated in the PCIe slot and power cables are connected.
- Test with a different display cable or monitor if possible.
- Driver Installation Issues:
- Download the latest drivers directly from the NVIDIA website.
- Use Display Driver Uninstaller (DDU) in Safe Mode to remove old drivers before installing new ones.
- Overheating:
- Ensure adequate airflow in your computer case.
- Clean dust from the graphics card's fans and heatsink.
- Verify fan operation.
- Performance Issues:
- Ensure drivers are up to date.
- Check background applications consuming resources.
- Verify power supply stability.
Specifications
| Feature | Detail |
|---|---|
| Graphics Coprocessor | NVIDIA GeForce RTX 3060 Ti |
| Graphics RAM Size | 8 GB GDDR6X |
| Memory Interface | 256-bit |
| GPU Core Clock | 1410 MHz |
| Boost Clock Speed | 1800 MHz |
| PCI Express | 4.0 x16 |
| Video Output Interface | DisplayPort (x3), HDMI (x1) |
| Recommended Power Supply | 650W |
| Power Connectors | 8-pin + 8-pin |
| Product Dimensions | 12.48 x 4.88 x 0.1 inches (317 x 124 x 53 mm) |
| Item Weight | 3.72 pounds |
Image 10: A visual representation of the key technical specifications for the maxsun GeForce RTX 3060 Ti iCraft graphics card, including core code, CUDA cores, frequencies, memory, and dimensions.
Official Product Video
Video 1: An official product video from MAXSUN Official Store showcasing the design and RGB lighting of the RTX 3060 Ti/3070 Ti iCraft Limited Edition Anime GPU.
Warranty and Support
For warranty information and technical support, please refer to the official maxsun website or contact your retailer. Keep your proof of purchase for warranty claims.
You can visit the maxsun Store on Amazon for more product information.
