Makita UP100DZ 12V Max Li-ion CXT Brushless Pruning Shear

1. General Safety Instructions

Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Work Area Safety: Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Electrical Safety: Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Personal Safety: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Battery Tool Use and Care: Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
• Service: Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

2. Product Overview

The Makita UP100DZ is a cordless pruning shear designed for efficient cutting of branches. It features a brushless motor for extended durability and performance.

2.1. Components

The pruning shear consists of the main body, cutting blades, a trigger, and control buttons. It operates with a 12V Max Li-ion CXT slide type battery (not included).

Figure 2.1: Main view of the Makita UP100DZ Pruning Shear.

Figure 2.2: The pruning shear shown with its carrying pouch, hex wrenches, and sharpening stone.

3. Setup

3.1. Battery Installation

1. Ensure the pruning shear is powered off.
2. Align the 12V Max Li-ion CXT slide type battery (not included) with the battery slot on the tool.
3. Slide the battery into the slot until it clicks securely into place.
4. To remove, press the battery release button and slide the battery out.

3.2. Blade Preparation

The UP100DZ features an external oil port for lubrication. Before first use and periodically during operation, apply lubrication oil to this port without disassembling the blade. This ensures smooth operation and extends blade life.

4. Operating Instructions

4.1. Powering On/Off

The main power button is located on the rear of the grip. Press this button to power the tool on or off. An LED indicator will confirm the power status.

Figure 4.1: The main power button (left) and blade opening angle adjustment button (right) on the control panel.

4.2. Blade Opening Angle Adjustment

The blade opening angle can be electronically adjusted to two levels for different cutting needs:

• Fully Open: 25mm maximum opening.
• Half Open: 18mm opening.

Use the blade opening angle adjustment button (located next to the power button) to toggle between these settings. To adjust the blade overlap when closed, press and hold the blade opening angle adjustment button for 3 seconds or more when the blades are fully closed.

4.3. Pruning Operation

The shear blade control is interlocked with the trigger for precise operation. To cut, position the branch within the blades and gently squeeze the trigger. The maximum cutting capacity is 25mm.

Figure 4.2: The pruning shear being used to cut a branch.

Figure 4.3: The pruning shear in action, demonstrating its use in a garden or orchard setting.

5. Maintenance

5.1. Blade Lubrication

Regular lubrication of the blades is crucial for optimal performance and longevity. Use the external oil port to inject lubrication oil. This can be done without disassembling the blades.

5.2. Cleaning and Storage

After each use, clean the blades of any sap or debris. Store the pruning shear in a dry, secure place, out of reach of children. Ensure the battery is removed if storing for extended periods.

6. Troubleshooting

The LED indicator on the front of the body provides status information:

• Power On: Indicates the tool is active.
• Battery Capacity Warning: Signals low battery. Recharge or replace the battery.
• Error Indicator: May indicate no battery, thermal protection activation, or an overload condition. Refer to the specific blinking pattern for detailed error codes if available in the full manual.

Figure 6.1: The pruning shear showing the location of the LED indicator near the battery.

7. Specifications

8. Warranty and Support

This Makita product comes with a 1-year manufacturer warranty. An additional 2 years of warranty can be obtained by registering the product within 30 days of purchase.

Warranty Invalidation: The guarantee does not apply where non-genuine or non-recommended parts or accessories are fitted to the tool. The use of non-genuine or incompatible batteries and chargers with Makita tools will invalidate the Makita guarantee for our tools.

For support or warranty claims, please contact Makita customer service or visit their official website.