Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your ATUMTEK 10-inch Selfie Ring Light with 55-inch Extendable Tripod Stand. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.
Product Overview
The ATUMTEK 10-inch Selfie Ring Light is designed to provide enhanced lighting for various activities such as streaming, vlogging, video calls, and photography. It features adjustable color temperatures, multiple brightness levels, an extendable tripod stand, a universal phone holder, and a Bluetooth remote control.
Package Contents
- 1 x 10-inch LED Ring Light
- 1 x Extendable Tripod Stand (up to 55 inches)
- 1 x Universal Phone Holder
- 1 x Bluetooth Remote Control
- 1 x User Manual
Product Components
Figure 1: Product Components Diagram
Figure 2: Assembled Ring Light
Setup Instructions
- Unfold the Tripod Stand: Gently spread the legs of the tripod base until they are stable on a flat surface.
- Extend the Telescopic Pole: Loosen the tightening knobs on the telescopic pole and extend it to your desired height. Securely tighten the knobs to lock the pole in place.
- Attach the Ring Light: Screw the ring light onto the 360-degree ball head at the top of the telescopic pole. Ensure it is firmly attached.
- Insert Phone into Holder: Open the universal phone clamp and carefully place your smartphone inside. Adjust the angle of the phone holder as needed using the ball head.
- Connect Power: Plug the USB-A connector of the ring light's power cord into a 5V/2A USB power source (e.g., wall adapter, power bank, computer USB port).
Figure 3: Ring Light Assembly
Video 1: Product Setup and Features Overview
Operating Instructions
Power On/Off and Lighting Adjustment
The ring light is controlled via an inline controller on the power cord.
- Power Button: Press the power button to turn the light on or off.
- Mode Button: Cycle through 3 color temperature modes: Warm Light (3000K), Natural Yellow, and White Light (6000K).
- Brightness Buttons (+/-): Adjust the brightness level. There are 10 adjustable brightness levels.
Figure 4: Adjustable Color Temperatures
Figure 5: Brightness Levels
Tripod and Phone Holder Adjustment
- Height Adjustment: The tripod stand can be extended from 16.14 inches (41 cm) to 55 inches (140 cm). Loosen the tightening knobs on the telescopic pole to adjust the height, then tighten them firmly.
- Angle Adjustment: The 360-degree rotatable ball head allows you to adjust the ring light and phone holder horizontally (360°) and vertically (135°) to achieve the perfect shooting angle.
Figure 6: Extendable Tripod Stand Heights
Figure 7: Height Adjustment in Use
Figure 8: Versatile Ball Head and Phone Clamp
Bluetooth Remote Control
The included Bluetooth remote allows for convenient hands-free control of your device's camera.
- Pairing: Turn on the Bluetooth remote. On your smartphone, go to Bluetooth settings and select "ATUMTEK" to pair.
- Compatibility: Compatible with iOS 7.0 and above, and Android 5.0 and above.
- Usage: Once paired, press the button on the remote to trigger your phone's camera shutter.
Figure 9: Bluetooth Remote Control in Use
Maintenance
- Cleaning: Use a soft, dry cloth to clean the ring light and tripod stand. Do not use abrasive cleaners or solvents.
- Storage: When not in use, collapse the tripod stand and store the ring light in a cool, dry place away from direct sunlight.
- Cable Care: Avoid bending or twisting the power cord excessively to prevent damage.
Troubleshooting
- Light not turning on: Ensure the USB power source is providing 5V/2A and is properly connected. Check the inline controller for any damage.
- Bluetooth remote not pairing: Ensure the remote is charged (if applicable) and turned on. Make sure your phone's Bluetooth is enabled and visible. Try unpairing and re-pairing the device.
- Tripod instability: Ensure the tripod legs are fully spread and the tightening knobs on the telescopic pole are securely fastened. Avoid extending the pole to its maximum height on uneven surfaces.
Specifications
| Feature | Specification |
|---|---|
| Ring Light Diameter | 10 inches |
| LED Beads | 100 |
| Color Temperature | 3000K - 6000K (Warm, Natural Yellow, White) |
| Brightness Levels | 10 |
| Max Brightness | 700lm |
| Tripod Extendable Height | 16.14 inches (41 cm) to 55 inches (140 cm) |
| Phone Clamp Width | 60mm - 90mm |
| Power Input | USB-A, 5V/2A |
| Power Cord Length | 2 meters |
| Bluetooth Remote Compatibility | iOS 7.0+, Android 5.0+ |
| Model Number | ATRL139 |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact ATUMTEK customer service directly. Keep your purchase receipt as proof of purchase.
