Conotech Artemis 35 Thermal Clip-On Monocular User Manual

1. Introduction and Product Overview

The Conotech Artemis 35 is a high-precision thermal imaging clip-on monocular designed for seamless integration with daytime scopes. It features a compact and ultra-light design, offering advanced thermal detection capabilities for various environments.

2. Setup

2.1 Battery Installation

The Artemis 35 uses two 18500 external batteries. To install, locate the battery compartment cap (refer to Product Overview image, part 3), unscrew it, insert the batteries with the correct polarity, and securely close the cap.

2.2 Mounting the Device

The Artemis 35 is designed as a clip-on attachment for daytime scopes. It can be quickly mounted in front of your existing day scope. The precise optical design and thermal alignment software ensure that no re-zeroing is required after attachment, allowing for immediate use.

3. Operating Instructions

3.1 Power On/Off and Standby Mode

To power on the device, press and hold the power button. To enter standby mode, simply press the power button once. This conserves power when the device is not in active use and allows for quick reactivation.

3.2 Navigation and Menu

The device features a joystick control for easy navigation through menus and settings. The user-friendly interface displays icons in a circular arrangement for intuitive selection of options.

3.3 Image Modes and Palettes

The Artemis 35 offers multiple image modes, including 'Smooth' and 'Enhance', to optimize image quality based on environmental conditions. It also provides 6-color palettes (BlackHot, WhiteHot, RedHot, Glowbow, ColdGreen, Rainbow) for different personal preferences and situations.

3.4 Wi-Fi Connectivity and Recording

Utilize the built-in Wi-Fi module to connect the Artemis 35 to your mobile device via the dedicated app. This allows for real-time viewing of footage and saving images/videos. The device has 32GB of internal memory for recording.

4. Maintenance

4.1 Cleaning

Use a soft, lint-free cloth to clean the lens and body of the monocular. For stubborn dirt, a slightly dampened cloth with water or a mild lens cleaning solution can be used. Avoid abrasive materials or harsh chemicals.

4.2 Battery Care

Ensure batteries are fully charged before extended use. If storing the device for a long period, remove the batteries to prevent leakage and damage.

4.3 Storage

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided protective case or a suitable storage solution to prevent physical damage.

5. Troubleshooting

5.1 Device Not Powering On

• Check if the batteries are correctly installed with the right polarity.
• Ensure the batteries are fully charged.
• Try using a different set of charged batteries.

5.2 Poor Image Quality

• Clean the lens thoroughly.
• Adjust the focus ring.
• Try different image modes and color palettes.
• Ensure there are no obstructions in front of the lens.

5.3 Wi-Fi Connection Issues

• Ensure the Wi-Fi function is enabled on the device.
• Restart both the device and your mobile phone.
• Ensure the mobile app is up to date.
• Check your phone's Wi-Fi settings to ensure it's connected to the device's network.

6. Specifications

7. Warranty and Support

For information regarding warranty coverage and technical support, please refer to the documentation included with your purchase or contact Conotech customer service directly. Specific warranty terms may vary by region and retailer.