1. Introduction
This manual provides detailed instructions for the safe and effective use, maintenance, and troubleshooting of your TPOB Slime 2 Black Clipper, Trimmer, and Shaver Set. Designed for professional and home use, this set offers precision and power for various hair cutting and grooming needs. Please read this manual thoroughly before first use and retain it for future reference.
1.1 What's Included
- TPOB Slime 2 Clipper (Reaper model)
- TPOB Slime 2 Trimmer
- TPOB Slime 2 Shaver (Mini Skull model)
- Multiple Clipper Guards (various sizes)
- Charging Cables
- Cleaning Brush
- Blade Oil
- Rubber Case
Image 1.1: Overview of the TPOB Slime 2 Black Clipper, Trimmer, and Shaver Set, including all main components and accessories.
2. Safety Information
WARNING: Keep out of children's reach.
- Always ensure the device is turned off before cleaning or performing maintenance.
- Do not immerse the devices in water.
- Use only the provided charging cables and power adapters.
- Avoid dropping the devices, as this may damage the blades or internal components.
- Do not use if blades are damaged or bent, as this may cause injury.
- Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. (Note: This disclaimer is from the product's legal information and is included as per instructions, though its relevance to a clipper manual is limited.)
3. Product Overview
3.1 TPOB Reaper Clipper
The TPOB Reaper Clipper features a fade blade with a deep tooth cutting blade, ideal for professional hair cutting and fading techniques. It includes a 4-clicking lever arm for precise adjustments.
Image 3.1: Top view of the TPOB Reaper Clipper, highlighting its blade and lever arm.
3.2 TPOB Trimmer
The TPOB Trimmer is designed for detailing, outlining, and achieving sharp lines. Its compact design allows for precise control.
Image 3.2: Close-up view of the TPOB Trimmer, showing its cutting head and power switch.
3.3 TPOB Mini Skull Shaver
The TPOB Mini Skull Shaver provides a close, smooth finish, perfect for achieving bald fades or cleaning up necklines.
Image 3.3: Close-up view of the TPOB Mini Skull Shaver, illustrating its foil head.
4. Setup
4.1 Initial Charging
- Before first use, fully charge each device. Connect the appropriate charging cable to the device and a suitable power source.
- The charging indicator light will illuminate during charging and typically change color or turn off when fully charged. Refer to the individual device's specific indicator behavior.
- A full charge may take several hours. Do not overcharge.
4.2 Attaching Clipper Guards
- Ensure the clipper is turned off.
- Select the desired guard size.
- Align the guard with the clipper blade and firmly push it into place until it clicks securely.
- To remove, gently pull the guard away from the blade.
5. Operating Instructions
5.1 Using the Clipper
- Ensure the clipper is charged and a guard is attached if desired.
- Turn on the clipper using the power switch.
- Adjust the blade lever for desired cutting length (the 4-clicking lever arm allows for precise fade adjustments).
- Guide the clipper against the direction of hair growth for an even cut.
- Turn off the clipper after use.
5.2 Using the Trimmer
- Ensure the trimmer is charged.
- Turn on the trimmer.
- Use the trimmer for outlining, detailing, and creating sharp edges.
- Turn off the trimmer after use.
5.3 Using the Shaver
- Ensure the shaver is charged.
- Turn on the shaver.
- Gently press the shaver against the skin and move in small, circular motions or straight passes for a close shave.
- Turn off the shaver after use.
6. Maintenance
6.1 Cleaning
- After each use, turn off the device and remove any attached guards.
- Use the provided cleaning brush to remove loose hairs from the blades and cutting head.
- For a more thorough clean, carefully detach the blades (refer to specific device instructions if applicable) and brush away debris.
- Do not rinse the devices under water unless explicitly stated as waterproof.
6.2 Oiling Blades
- After cleaning and before each use (or as needed), apply 1-2 drops of blade oil across the teeth of the blades.
- Turn on the device for a few seconds to distribute the oil evenly.
- Wipe off any excess oil with a clean cloth. Regular oiling ensures smooth operation and extends blade life.
6.3 Storage
Store the devices and accessories in a cool, dry place, away from direct sunlight and moisture. Use the provided rubber case for protection during storage and travel.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Low battery; Power switch off | Charge the device fully; Ensure power switch is in the 'on' position. |
| Hair pulling or uneven cut | Blades dull or dirty; Insufficient oil; Low battery; Incorrect technique | Clean and oil blades; Charge device; Use proper cutting technique against hair growth; Consider blade replacement if excessively dull. |
| Device making unusual noise | Blades need oiling; Debris caught in blades | Oil blades; Clean blades thoroughly. |
| Shaver not providing a close shave | Foil head worn out; Not enough pressure; Incorrect angle | Replace foil head; Apply gentle, consistent pressure; Adjust shaving angle. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TPOB |
| Model | Slime 2 (Black Pack) |
| Motor Speed | 6800 RPM |
| Power Source | Battery Powered (1 Lithium Ion battery included per device) |
| Item Weight | 1.15 Kilograms (total package) |
| Recommended Use | Professional Barber |
| Package Dimensions | 9.41 x 9.37 x 3.9 inches |
9. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please refer to the official TPOB website or contact TPOB customer service directly. Keep your proof of purchase for any warranty claims.
Visit the TPOB Store on Amazon for more products and information.
