VONROC Digital Watering Timer User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your VONROC Digital Watering Timer, model WT502DC. This device is designed to simplify your garden watering routine by allowing precise programming of watering intervals and durations, ensuring your plants receive optimal hydration automatically.

The VONROC Digital Watering Timer features universal compatibility and user-friendly controls, making it an essential tool for maintaining a healthy and flourishing garden.

Safety Information

• Read all instructions carefully before use.
• Do not immerse the timer in water. The device is rated IPX5 for water resistance, meaning it can withstand water jets, but not submersion.
• Use only 2 AA alkaline batteries (not included). Do not mix old and new batteries, or different types of batteries.
• Remove batteries if the timer will not be used for an extended period.
• Keep out of reach of children.
• Protect from freezing temperatures. Disconnect and store indoors during winter to prevent damage.

Package Contents

• VONROC Digital Watering Timer (WT502DC)
• User Manual
• Connection adapters (26.5mm/G3/4 and 21mm/G1/2)
• Removable metal filter

Setup

1. Battery Installation

The timer requires 2 AA alkaline batteries (not supplied). Ensure correct polarity when inserting the batteries.

1. Locate the battery compartment on the back of the timer.
2. Open the battery compartment cover.
3. Insert 2 new AA alkaline batteries, observing the positive (+) and negative (-) markings.
4. Close the battery compartment cover securely to ensure water resistance.

Figure 1: Front view of the VONROC Digital Watering Timer with its LCD display and control buttons.

2. Connecting to a Faucet

The timer is designed for universal compatibility with most standard outdoor faucets. It includes two connection options and a removable metal filter.

1. Ensure the faucet is turned off.
2. Identify the correct adapter for your faucet: 26.5mm (G3/4) or 21mm (G1/2).
3. Insert the removable metal filter into the timer's inlet connection (the top connection). This filter helps prevent debris from entering the timer.
4. Screw the timer onto your faucet securely by hand. Do not overtighten.
5. Connect your garden hose or watering system to the outlet connection at the bottom of the timer.

Figure 2: Side view of the timer, highlighting the inlet connection and the removable metal filter.

Figure 3: The digital watering timer installed on an outdoor faucet, ready for use.

Operating Instructions

The large LCD screen and intuitive controls make programming your watering schedule straightforward.

Programming Your Watering Schedule

1. Set Current Time: Use the "NOW" section on the LCD to set the current time. Use the '+' and '-' buttons to adjust, and 'OK' to confirm.
2. Set Start Time: Navigate to the "START TIME" section. This is when your automatic watering cycle will begin. Adjust using '+' and '-' buttons.
3. Set Watering Duration ("HOW LONG"): This determines how long the water will run during each cycle. You can set durations from 1 second to 99 minutes. Adjust using '+' and '-' buttons.
4. Set Watering Frequency ("HOW OFTEN"): This determines how often the watering cycle repeats. You can set frequencies from 1 hour to 15 days. Adjust using '+' and '-' buttons.
5. Activate Program: Once all settings are configured, ensure the timer is in automatic mode. The display will show "NEXT START" indicating the time until the next scheduled watering.

Manual Watering ("OPEN" Function)

To manually water without affecting your programmed schedule, use the "OPEN" function.

• Press the button labeled "OPEN" or similar (refer to the specific button on your timer, often combined with ESC/OFF).
• The water will flow continuously until you press the button again to stop it, or until a pre-set manual duration expires (if applicable).
• This function is useful for quick tasks like filling a watering can or testing your system.

Pausing/Disabling Program

To temporarily pause or disable the watering program, press the "ESC/OFF" button. Press it again to resume the program.

Maintenance

• Cleaning the Filter: Periodically check and clean the removable metal filter located at the inlet connection. Remove the timer from the faucet, take out the filter, rinse it under running water to remove any debris, and reinsert it.
• Battery Replacement: When the battery indicator on the LCD shows low power, replace both AA batteries promptly to ensure continuous operation.
• Winter Storage: Before the first frost, disconnect the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, frost-free location. Remove batteries before long-term storage.
• General Cleaning: Wipe the exterior of the timer with a damp cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

Specifications

Figure 4: Product dimensions for the WT502DC model.

Warranty and Support

VONROC is committed to providing high-quality tools and accessories. For support or warranty claims, please refer to the following information:

• Return Policy: This product is subject to a 30-day return policy for refund or replacement, as per the seller's terms.
• After-Sales Service: In most cases, VONROC aims to provide a replacement unit without requiring the return of a defective machine, minimizing inconvenience and environmental impact.
• Contact Support: For further assistance, please visit the official VONROC brand store or contact their customer service.
• Online Resources: Additional information and product details can be found on the VONROC brand page on Amazon.