GEEKVAPE Aegis Boost 2 Pro 100W Pod System User Manual

Introduction

The GEEKVAPE Aegis Boost 2 Pro Kit is an advanced pod system designed for an exceptional vaping experience. It features robust performance, intense flavor delivery, and a user-friendly design. This device is powered by a single 18650 battery (not included) and offers an output power of up to 100 Watts, including a classic Watt mode and a Boost mode. The system utilizes specialized pods with a 4.5 ml tank volume and is compatible with GeekVape P-Series Coils.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your Aegis Boost 2 Pro Pod System.

Safety Information

Please read all safety warnings and instructions before using this product to ensure safe operation and prevent damage. Keep this manual for future reference.

• This product is nicotine-free.
• Keep out of reach of children and pets.
• Do not expose the device to extreme temperatures, direct sunlight, or water.
• Use only the recommended charging cable (USB Type-C) and a compatible power adapter (5V/2A).
• Ensure the 18650 battery is inserted with correct polarity.
• Do not use damaged batteries or coils.
• If the device malfunctions or emits unusual odors, discontinue use immediately.

Package Contents

Verify that all items are present in your package:

• 1 x GEEKVAPE Aegis Boost 2 Pro Device
• 1 x GEEKVAPE Aegis Boost 2 Pro Pod (4.5 ml)
• 1 x GEEKVAPE P-Series Coil 0.15 Ohm (Pre-installed)
• 1 x GEEKVAPE P-Series Coil 0.4 Ohm
• 1 x Coil Tool
• 1 x USB Type-C Cable
• 1 x User Manual (this document)

Product Overview

Familiarize yourself with the main components of your Aegis Boost 2 Pro Pod System.

Image: Front view of the GEEKVAPE Aegis Boost 2 Pro 100W Pod System, showcasing its vibrant rainbow finish and display screen.

Image: Multiple color variants of the GEEKVAPE Aegis Boost 2 Pro 100W Pod System, including Black, Silver, Blue, Rainbow, Blue-Red, Red, Purple, and Green.

• Pod: Houses the coil and e-liquid. Features a 4.5ml capacity and top-fill system.
• Airflow Control: Located at the back of the pod, adjustable for DL (Direct Lung) and RDL (Restricted Direct Lung) vaping.
• Mod: The main body of the device, containing the battery compartment, display, and control buttons.
• Display: 0.96 inch TFT color display for viewing settings and information.
• USB Type-C Port: For charging the 18650 battery (if charged internally).

Setup

1. Battery Installation

The Aegis Boost 2 Pro requires one 18650 battery (not included). Ensure the battery is fully charged before first use.

1. Locate the battery compartment door on the device.
2. Open the door and insert the 18650 battery according to the polarity markings (+/-).
3. Close the battery compartment door securely.

2. Coil Installation

The device uses GeekVape P-Series Coils.

1. Remove the pod from the device.
2. If a coil is already installed, pull it out from the bottom of the pod.
3. Insert a new P-Series Coil firmly into the coil slot at the bottom of the pod. Ensure it is fully seated.

3. Filling the Pod

The pod features a convenient top-fill system.

1. Locate the rubber plug at the top of the pod.
2. Lift the rubber plug to expose the filling port.
3. Carefully fill the pod with your preferred e-liquid through the filling port. Do not overfill.
4. Securely close the rubber plug.
5. Important: After filling a new coil, let the pod stand for 5-10 minutes to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.

4. Installing the Pod

Once filled and with the coil installed, re-attach the pod to the device.

• Align the pod with the magnetic connection on the device.
• Push the pod down until it clicks securely into place.

Operating Instructions

1. Power On/Off

• To turn on the device: Press the fire button 5 times rapidly.
• To turn off the device: Press the fire button 5 times rapidly. The screen will indicate "Power Off".

2. Adjusting Wattage

The device supports wattage adjustment from 5W to 100W.

• Use the "+" and "-" adjustment buttons located below the display to increase or decrease the wattage.
• The recommended wattage range for your installed coil will be displayed on the screen or can be found on the coil itself.

3. Boost Mode

The Boost mode automatically sets the optimal output for maximum vapor and flavor.

• Refer to the device's on-screen menu or specific button combinations (usually fire button + up/down) to activate Boost mode. Consult the on-screen prompts.

4. Vaping

• Press and hold the fire button while inhaling from the mouthpiece.
• Release the fire button when you finish inhaling.

5. Charging

The device supports internal charging via USB Type-C at 5V/2A.

• Connect the USB Type-C cable to the charging port on the device.
• Connect the other end of the cable to a suitable USB power source (e.g., wall adapter, computer USB port).
• The display will show the charging status.
• It is recommended to charge external 18650 batteries with a dedicated external charger for optimal battery life and safety.

Maintenance

1. Coil Replacement

Coils are consumable parts and need to be replaced regularly (typically every 1-2 weeks, depending on usage and e-liquid). Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor.

• Follow the "Coil Installation" steps in the Setup section.
• Dispose of used coils responsibly.

2. Cleaning the Device and Pod

• Regularly wipe down the device and pod with a clean, dry cloth.
• If e-liquid accumulates in the pod connection area, clean it with a cotton swab to prevent connectivity issues.
• Do not use harsh chemicals or abrasive cleaners.

3. Storage

• Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, remove the battery and store it separately.

Troubleshooting

Specifications

Warranty and Support

GEEKVAPE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or the official GEEKVAPE customer support. Keep your proof of purchase for warranty claims.

For more information, visit the official GeekVape website: www.geekvape.com