Introduction
This instruction manual provides comprehensive guidance for the assembly and care of your JEKCA Shiba Inu 02S-M02 plastic building block sculpture. JEKCA building blocks are designed to create detailed 3D models using a patented locking technology that ensures stability without the need for adhesive. Please read this manual thoroughly before beginning assembly.
What's in the Box
Upon opening your JEKCA Shiba Inu 02S-M02 package, verify that all the following components are present:
- Instruction Manual
- Bricks (various shapes and colors)
- Pins (for connecting bricks)
- Pin Driver (tool for inserting pins)
- Quick Guide
Safety Information
WARNING: Small parts are included. This product is recommended for individuals aged 14 years and above due to potential choking hazards for younger children.
Setup and Assembly
The JEKCA Shiba Inu 02S-M02 model requires careful assembly of over 2400 pieces. The process involves connecting individual bricks using specialized pins and the provided pin driver. Follow the detailed step-by-step manual included in your package for precise assembly instructions. The manual will guide you through each layer and section of the sculpture.
Image 1: The fully assembled JEKCA Shiba Inu 02S-M02 sculpture, showcasing its light brown and white brick construction and detailed form.
Ensure each pin is firmly inserted to secure the bricks and maintain the structural integrity of the sculpture. Take your time and verify each step against the manual's illustrations.
Image 2: A side profile of the assembled Shiba Inu model, illustrating the intricate brick patterns and overall shape.
Operating (Display and Handling)
Once assembled, the JEKCA Shiba Inu 02S-M02 sculpture is intended for display. While designed to be sturdy, it should be handled with care to prevent accidental disassembly or damage. Avoid dropping the sculpture or applying excessive force.
Image 3: Rear view of the Shiba Inu sculpture, providing a different perspective of its construction.
Maintenance
To maintain the appearance of your JEKCA Shiba Inu 02S-M02 sculpture, periodically dust it with a soft, dry cloth. For more thorough cleaning, gently wipe the surface with a slightly damp cloth. Do not use abrasive cleaners, solvents, or submerge the sculpture in water, as this may damage the plastic or loosen connections.
Troubleshooting
- Loose Bricks or Sections: If any part of the sculpture feels loose, identify the affected bricks and re-insert the connecting pins firmly using the provided pin driver. Ensure the pins are fully seated.
- Difficulty During Assembly: If you encounter challenges during the assembly process, refer back to the detailed instruction manual. Pay close attention to the illustrations and ensure you are using the correct bricks and pin orientations for each step.
- Missing Parts: In the event of missing components, please contact JEKCA customer support (refer to the Support section).
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 11.85 x 6.42 x 11.97 inches (30.1 x 16.3 x 30.4 cm) |
| Item Weight | 3.19 pounds |
| Item Model Number | ST19SHB02-M02 |
| Manufacturer Recommended Age | 14 years and up |
| Manufacturer | JEKCA Limited |
Image 4: Dimensional diagram of the Shiba Inu sculpture, indicating its length, width, and height.
Warranty Information
Specific warranty details for the JEKCA Shiba Inu 02S-M02 are not provided in the product information. Please refer to the official JEKCA website or contact JEKCA customer support for any warranty-related inquiries.
Support
For further assistance, missing parts, or technical support regarding your JEKCA Shiba Inu 02S-M02 building blocks, please visit the official JEKCA website or contact their customer service department directly. Contact information can typically be found on the product packaging or the manufacturer's official website.