Armitron Sport Retro Digital Chronograph Bracelet Watch Model 40/8474 User Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your Armitron Sport Retro Digital Chronograph Bracelet Watch, Model 40/8474. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

Image: Front view of the Armitron Sport Retro Digital Chronograph Bracelet Watch, Model 40/8474, showcasing its digital display and two-tone bracelet.

Setup

Button Functions

Your watch features four buttons for various operations:

• RESET (Top Left): Used for resetting values or advancing settings.
• MODE (Bottom Left): Cycles through different operational modes (Time, Chronograph, Alarm, Dual Time).
• START/STOP (Top Right): Used to start and stop functions, or to adjust settings.
• LIGHT (Bottom Right): Activates the backlight for illumination.

Image: Side view of the watch, highlighting the placement of the control buttons.

Setting Time and Date

1. From the normal time display, press the MODE button repeatedly until the time setting mode is indicated (e.g., flashing digits).
2. Press the RESET button to select the digit or setting you wish to adjust (e.g., seconds, hours, minutes, month, date, day).
3. Use the START/STOP button to increase the selected value. Hold the button to advance rapidly.
4. Once all settings are correct, press the MODE button to exit the setting mode and return to the normal time display.

Battery Information

The watch is powered by a product-specific battery, which is included. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance integrity is maintained.

Operating Modes

Time Display Mode

This is the default mode, displaying the current time, seconds, day, and date. Pressing the LIGHT button will illuminate the display.

Chronograph (Stopwatch) Mode

1. Press the MODE button until 'CHRONO' or a similar indicator appears on the display.
2. Press START/STOP to begin timing.
3. Press START/STOP again to pause the timing.
4. To record a lap time, press RESET while the chronograph is running. The lap time will display briefly before returning to the running total.
5. To reset the chronograph to zero, ensure it is stopped, then press RESET.

Alarm Mode

1. Press the MODE button until 'ALARM' or a bell icon appears.
2. Press RESET to select the hour or minute digits.
3. Use START/STOP to adjust the selected digit to your desired alarm time.
4. Press MODE to exit the alarm setting.
5. To activate or deactivate the alarm, press START/STOP while in Alarm Mode. An alarm icon will indicate activation.
6. The watch also features an hourly chime function, which can typically be toggled on/off in the alarm setting mode using the RESET or START/STOP button.

Dual Time Mode

1. Press the MODE button until 'DUAL TIME' or 'T2' appears.
2. Press RESET to select the hour or minute digits.
3. Use START/STOP to adjust the selected digit to set the second time zone.
4. Press MODE to exit the dual time setting.

Military Time (12/24 Hour Format)

In the normal time display mode, pressing the START/STOP button may toggle between 12-hour and 24-hour (military) time formats. Look for 'AM/PM' indicators for 12-hour format or their absence for 24-hour format.

Backlight Function

Press the LIGHT button (bottom right) to illuminate the display for a few seconds, aiding visibility in low-light conditions.

Maintenance

Water Resistance

This watch is water resistant to 165 feet (50 meters). This rating means the watch is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid pressing buttons while the watch is submerged in water to prevent water ingress.

Cleaning

To clean your watch, wipe it with a soft, damp cloth. For the bracelet, a soft brush can be used to remove dirt from crevices. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.

Storage

When not in use, store your watch in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to extreme conditions can affect the watch's performance and battery life.

Image: Back view of the watch, showing the stainless steel case back and bracelet clasp.

Troubleshooting

Display is Blank or Dim

• Check the battery. If the display is blank or very dim, the battery may need replacement.

Buttons are Unresponsive

• Ensure the watch is not in a locked mode (if applicable, though not a common feature for this model).
• If buttons remain unresponsive, a battery issue or internal malfunction may be present. Consult a watch technician.

Backlight is Not Bright Enough

• The backlight provides illumination for basic visibility in darkness. Its intensity is designed for functional use rather than bright illumination. This is a characteristic of the watch and not typically a defect.

Specifications

Warranty and Support

For information regarding product warranty, service, or additional support, please refer to the documentation included with your purchase or visit the official Armitron website. You can find more information about Armitron products and support at the Armitron Store on Amazon.