Exmark 142-6261 Jack Mount Kit Instruction Manual

Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Exmark 142-6261 Jack Mount Kit. Please read this manual thoroughly before installation and retain it for future reference. Ensure this part is compatible with your specific equipment model, serial number, and production date by consulting your equipment's original owner's manual.

Safety Information

Always prioritize safety when working with machinery and tools. Failure to follow safety instructions can result in serious injury or property damage.

• Read All Instructions: Before installation or use, carefully read and understand all instructions in this manual and your equipment's owner's manual.
• Wear Protective Gear: Always wear appropriate personal protective equipment, including safety glasses and gloves, during installation and maintenance.
• Secure Equipment: Ensure the equipment is turned off, the engine is cool, and all moving parts have stopped before beginning any work. Disconnect the spark plug wire to prevent accidental starting.
• Use Correct Tools: Use only the recommended tools for installation to prevent damage to the kit or equipment.
• Proper Lifting: When using a jack with this mount, ensure the jack is rated for the weight of your equipment and is placed on a stable, level surface. Never work under equipment supported only by a jack; always use jack stands.

Image Description: A detailed view of the Exmark 142-6261 Jack Mount Kit, highlighting the yellow warning labels affixed to the red metal surface. These labels provide important safety instructions and operational guidelines.

What's in the Box

Your Exmark 142-6261 Jack Mount Kit package should contain the following components:

• 1x Exmark 142-6261 Jack Mount Bracket (Red)
• 2x Mounting Bolts (Black, Hex-Head)

Image Description: This image displays the Exmark 142-6261 Jack Mount Kit, a red metal bracket designed for mounting a jack, accompanied by two black hex-head bolts for installation.

Setup and Installation

Follow these steps to properly install the Exmark 142-6261 Jack Mount Kit on your compatible Exmark equipment.

1. Prepare Equipment: Park your equipment on a level surface. Turn off the engine, engage the parking brake, and remove the ignition key. Allow the engine and exhaust components to cool completely.
2. Locate Mounting Area: Identify the designated mounting location on your equipment's frame. Refer to your equipment's owner's manual for the precise attachment points for this jack mount kit.
3. Position Mount: Align the Exmark 142-6261 Jack Mount Bracket with the pre-drilled holes on your equipment's frame.
4. Secure with Bolts: Insert the two provided mounting bolts through the bracket and into the frame. Hand-tighten the bolts initially.

Image Description: This image shows the two black hex-head bolts included with the Exmark 142-6261 Jack Mount Kit, used for securing the mount to the equipment frame.
5. Tighten Bolts: Using an appropriate wrench, securely tighten both mounting bolts. Do not overtighten, but ensure the bracket is firmly attached and does not wobble.
6. Verify Installation: Double-check that the jack mount kit is securely fastened and all bolts are tightened.

Image Description: A side profile view of the Exmark 142-6261 Jack Mount Kit, illustrating its angled design and the circular opening for the jack.

Operating the Jack Mount Kit

The Exmark 142-6261 Jack Mount Kit provides a secure point for attaching a compatible jack to lift your equipment for maintenance or service.

1. Position Equipment: Ensure your equipment is on a firm, level surface before attempting to lift it.
2. Prepare Jack: Position your compatible jack (not included) near the jack mount kit.
3. Engage Jack: Insert the jack's lifting arm or pin into the circular opening of the jack mount kit. Ensure the jack is fully seated and stable.
4. Lift Equipment: Slowly and carefully operate the jack to lift the equipment to the desired height. Monitor the equipment's stability throughout the lifting process.
5. Use Jack Stands: Once the equipment is lifted, immediately place appropriately rated jack stands under the equipment's frame at secure points. Never rely solely on the jack for support.
6. Lower Equipment: After completing work, carefully remove the jack stands. Slowly lower the equipment using the jack until it rests firmly on the ground. Remove the jack.

Maintenance

Regular inspection and basic maintenance will ensure the longevity and safe operation of your jack mount kit.

• Visual Inspection: Periodically inspect the mount kit for any signs of damage, cracks, bends, or excessive wear.
• Check Fasteners: Ensure all mounting bolts remain tight. Re-tighten if necessary.
• Cleanliness: Keep the mount kit free from dirt, debris, and corrosive materials. Clean with a damp cloth if needed.
• Rust Prevention: If the paint finish is chipped, touch up with appropriate paint to prevent rust.

Troubleshooting

If you encounter issues with your Exmark 142-6261 Jack Mount Kit, consider the following:

• Mount is Loose: Check and tighten all mounting bolts. Ensure the bracket is correctly aligned with the equipment's frame.
• Jack Does Not Fit: Verify that your jack is compatible with the mount kit's opening. Refer to your jack's specifications.
• Visible Damage: If the mount kit shows signs of structural damage (e.g., cracks, severe bends), discontinue use immediately and replace the part.

For issues not covered here, contact Exmark customer support or a certified service technician.

Specifications

Warranty Information

Specific warranty terms for the Exmark 142-6261 Jack Mount Kit are provided by the manufacturer. Please refer to the warranty documentation included with your original purchase or visit the official Exmark website for detailed information regarding coverage, duration, and claims procedures.

Support

For technical assistance, replacement parts, or further inquiries regarding your Exmark 142-6261 Jack Mount Kit, please contact Exmark customer support directly. You can typically find contact information on the official Exmark website or in your equipment's owner's manual.

Exmark Official Website: www.exmark.com