1. Introduction
Thank you for choosing the DACOM BoneBuds X1 Bluetooth 5.3 Wireless Earbuds. These open-ear earbuds are designed to provide a comfortable listening experience with advanced features like Bluetooth 5.3 connectivity and call noise reduction. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
2. Safety Information
- Do not expose the earbuds or charging case to extreme temperatures or direct sunlight.
- Avoid dropping or applying excessive force to the device.
- Keep away from water and liquids, although the earbuds are water-resistant, the charging case is not.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
- Use only the provided charging cable and a certified power adapter.
3. Package Contents
Ensure all items are present in the package:
- DACOM BoneBuds X1 Wireless Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- User Manual
4. Product Overview
The DACOM BoneBuds X1 features an open-ear design for comfort and awareness of your surroundings. The charging case provides extended battery life and protection for your earbuds.
This image displays the DACOM BoneBuds X1 wireless earbuds alongside their charging case. It highlights the battery performance: 6 hours of playtime for the earbuds, an additional 18 hours with the charging case, totaling 24 hours of combined use.
A detailed view of one DACOM BoneBuds X1 earbud, emphasizing the integrated Bluetooth 5.3 chip for stable connectivity and the MEMS Silicon Microphone for clear audio capture and ENC call noise reduction.
5. Setup
5.1 Charging the Earbuds and Case
- Place the earbuds into the charging case, ensuring they are correctly seated.
- Connect the USB charging cable to the charging port on the case and to a power source.
- The indicator light on the case will show charging status. A full charge typically takes approximately 1.5 hours for the earbuds and 2 hours for the case.
5.2 Pairing with a Device
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED light on the earbuds.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices and select "DACOM BoneBuds X1" from the list.
- Once connected, the LED indicator on the earbuds will turn off or show a solid light, depending on the model.
- If pairing fails, turn off Bluetooth on your device, place the earbuds back in the case, close it, and then repeat the steps.
6. Operating Instructions
6.1 Wearing the Earbuds
Gently place the earbuds over your ears, ensuring the ear hooks are securely positioned behind your ears and the sound outlets are aligned with your ear canals for optimal sound transmission.
This diagram illustrates how the DACOM BoneBuds X1 earbuds fit and describes their sound profile: 'High frequency bright, transparent and layered' and 'low frequency natural and honest to human voice'.
6.2 Basic Controls
The earbuds feature touch controls for various functions:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
- Activate Voice Assistant (Siri/Google Assistant/Alexa): Triple tap on either earbud.
6.3 Noise Cancellation (ENC)
The BoneBuds X1 features Environmental Noise Cancellation (ENC) for calls, which reduces background noise during phone conversations. This feature is automatically active during calls.
7. Maintenance
7.1 Cleaning
- Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure charging contacts are clean and dry before placing earbuds in the case.
7.2 Storage
When not in use, store the earbuds in their charging case to protect them from dust and damage. Store in a cool, dry place.
8. Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds not pairing |
|
| No sound from one earbud |
|
| Charging case not charging |
|
| Low volume |
|
9. Specifications
This image presents a comparison between the DACOM BoneBuds X1's TWS bone conduction and traditional bone conduction. It highlights the BoneBuds X1's 'Zero' sound leakage, near-field sound transmission, good sound quality with full bass, '0' compression, separate design, and light weight (9g per ear), contrasting with traditional bone conduction's strong vibration, obvious sound leakage, flat sound quality, weak bass, clamping sensation, and heavier weight (over 30g).
| Feature | Detail |
|---|---|
| Model | BoneBuds X1 |
| Bluetooth Version | 5.3 |
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Driver Diameter | 10.8 mm |
| Playtime (Earbuds) | Up to 6 hours |
| Total Playtime (with Case) | Up to 24 hours |
| Water Resistance | Yes (earbuds only) |
| Microphone | Yes (MEMS Silicon Microphone) |
| Noise Cancellation | ENC (Environmental Noise Cancellation) for calls |
| Voice Assistant Support | Alexa, Apple Siri, Google Assistant |
| Audio Encoding | AAC |
| Control Type | Touch Control |
An exploded diagram showcasing the internal components of the DACOM BoneBuds X1 earbud, emphasizing the design elements contributing to its excellent sound quality.
10. Warranty and Support
DACOM provides a 12-month warranty for all products. If you encounter any quality issues with your product, please do not hesitate to contact our customer support. We offer a full refund or a new replacement to ensure 100% customer satisfaction.
For support, please refer to the contact information provided with your purchase or visit our official website.
