1. Introduction
The Hornady Security Dehumidifier Stone utilizes an advanced patented material to absorb moisture from enclosed areas such as safes, gun cases, and tool chests. This device is designed to protect firearms, gun accessories, ammunition, and other valuables from excess moisture, rust, and corrosion. Its reusable nature and integrated moisture indicator provide a convenient solution for humidity control.
Image 1: The Hornady Rapid Dry Dehumidifier Stone, showing its compact design and indicator window.
Image 2: Overview of the Hornady Rapid Dry Dehumidifier Stone, highlighting its model number and applications for protecting various items.
2. Setup
- Initial Check: Verify that the indicator window on the dehumidifier stone is white, indicating a dry state. If it is blue, follow the recharging instructions in Section 4 before use.
- Placement: Place the dehumidifier stone inside the desired enclosed area, such as a gun safe, gun case, or tool chest.
- Multiple Units: For larger spaces or areas with consistently high humidity, consider using multiple dehumidifier stones to achieve optimal moisture control.
Image 3: Diagram illustrating the components and basic operation of the dehumidifier stone, including the protective cover and indicator window.
3. Operating Instructions
The Hornady Rapid Dry Dehumidifier Stone operates passively by absorbing moisture from its surroundings. No power source is required during operation.
- Continuous Absorption: The stone continuously works to absorb humidity from the air within your enclosed storage space.
- Moisture Indicator: Monitor the indicator window on the side of the stone. When the stone is dry and actively absorbing moisture, the indicator will be white.
- Saturation Indication: As the stone absorbs moisture and becomes saturated, the indicator window will gradually change from white to blue. This signals that the stone needs to be recharged.
4. Maintenance (Recharging)
Recharge the dehumidifier stone when the indicator window turns blue (WET).
- Remove Cover: Carefully remove the protective rubber cover from the stone.
- Recharge Method: Choose one of the following methods to recharge the stone:
- Oven: Place the stone in an oven preheated to 300°F (150°C) for approximately 1 hour.
- Microwave: Place the stone in a microwave on defrost mode (200W-300W) for 9 minutes.
- Cool Down: Allow the stone to cool completely to room temperature before replacing the protective rubber cover.
- Indicator Reset: Note that it may take a few hours for the indicator window to fully return to white (DRY) after recharging.
CAUTION: The stone will be HOT after recharging. Handle with care.
CAUTION: Do not overheat the stone.
Image 4: Detailed recharge instructions, including recommended temperatures and times for oven and microwave methods, and safety warnings.
5. Troubleshooting
This instruction manual does not include specific troubleshooting steps for the Hornady Rapid Dry Dehumidifier Stone. If the device is not functioning as expected after following the setup and maintenance instructions, please refer to the manufacturer's support information.
6. Specifications
- Model Name: RAPID DRY
- Model Number: 95898
- Item Package Dimensions L x W x H: 7.05 x 4.09 x 1.46 inches
- Item Dimensions L x W x H: 7.25 x 4.25 x 1.5 inches
- Net Weight: 0.3 lbs (0.2 Kilograms)
- Effective Volume: Up to 10 cubic feet
- Material: Steel (referring to the housing/frame)
- Color: Black
Image 5: Key specifications of the dehumidifier stone, including its effective coverage area, physical dimensions, and weight.
7. Safety Information
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
8. Warranty and Support
- Warranty: For warranty details, please refer to the manufacturer's specific warranty information.
- Manufacturer: HORNADY
