LyLmLe 20W Smart Magnetic LED Pool Light (Model R-PL28-CB20W) User Manual

1. Introduction

Thank you for choosing the LyLmLe 20W Smart Magnetic LED Pool Light. This product is designed to provide vibrant, customizable lighting for various pool types, enhancing your nighttime swimming experience. Featuring APP control, IP68 waterproofing, and a safe 12V output, this light offers durability and ease of use.

Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• Only use the provided 12V transformer to power the light. Do not connect directly to higher voltage sources.
• Do not attempt to open or modify the sealed light unit, as this will compromise its waterproof integrity and void the warranty.
• Keep the power cord and transformer away from sharp objects and high-traffic areas to prevent damage.

2. Specifications

3. Setup & Installation

The LyLmLe LED Pool Light is designed for easy installation across various pool types. It utilizes a magnetic attachment system or a metal base for secure placement.

General Installation Steps:

1. Prepare the Pool Light: Ensure the light unit is clean and free of debris.
2. Power Connection: Connect the light to the provided 12V transformer. Plug the transformer into an outdoor outlet. The transformer steps down the voltage to a safe 12V for underwater operation.
3. Placement: Follow the specific instructions below based on your pool type.

Installation for Steel Above-Ground Pools:

For steel above-ground pools, the light can be directly adsorbed onto the metal steel pool wall using its built-in strong magnets.

• Simply place the light unit on the inner side of the pool wall. The strong magnets will secure it in place.
• Ensure the power cord is routed safely over the edge of the pool and connected to the transformer.

Image: LyLmLe LED Pool Light magnetically attached to a steel above-ground pool wall.

Installation for Soft-Sided Frame Pools:

For soft-sided frame pools, separate the round metal plate from the lamp. Place the lamp on the inner side of the pool wall and the round metal plate on the outer side, aligning them so the magnets hold the light in place.

Image: Diagram showing the magnetic light and separate metal plate for soft-sided pools.

Installation for Inground Pools & Non-Steel Pools:

For inground pools or non-steel above-ground pools, use the included round metal base and waterproof glue to secure the light.

1. Clean the Surface: Wipe off any dirt or algae from the desired installation area on the pool surface. The glue can be applied directly underwater.
2. Apply Glue: Apply an appropriate amount of the provided waterproof glue to the middle circle of the round metal base.
3. Attach Base: Press the metal base firmly onto the cleaned pool surface for approximately 10 seconds.
4. Curing Time: Wait for 1 hour until the glue is fully dry and cured.
5. Attach Light: Align the light unit with the two protruding spots on the metal base and fix it to prevent slipping.

Image: Application of glue to the metal base and attachment to the pool wall for inground pools.

Installation Videos:

4. Operation

The LyLmLe LED Pool Light is controlled via a dedicated smartphone application, offering a wide range of customization options.

APP Control:

1. Download the APP: Scan the QR code provided in the product packaging or search for the LyLmLe app in your smartphone's app store (iOS/Android).
2. Connect to Light: Open the app and follow the on-screen instructions to connect to your LyLmLe pool light via Bluetooth.
3. Color Customization: Use the app's color wheel to select from infinite custom colors.
4. Brightness Adjustment: Adjust the light's brightness to your preference using the dimming controls in the app.
5. Music Sync: The app features a high-sensitivity audio sensor that allows the light to flash and change colors in sync with music or even your voice.
6. Timer Schedule: Set specific times for the light to automatically turn on and off, providing convenience and energy saving.

Image: Smartphone app interface demonstrating color selection, music sync, and timer schedule features for the pool light.

5. Maintenance

The LyLmLe LED Pool Light is designed for minimal maintenance due to its durable and sealed construction.

• Cleaning: Periodically wipe the light's surface with a soft cloth to remove any accumulated dirt or algae. Do not use abrasive cleaners or harsh chemicals.
• Durability: The IP68 waterproof rating and integrated sealed design prevent leaks and corrosion, eliminating the need for frequent battery changes or rust treatment.
• Storage: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

6. Troubleshooting

If you encounter issues with your LyLmLe LED Pool Light, refer to the following common troubleshooting steps:

• Light Not Turning On:
  • Check if the power adapter is securely plugged into a working outlet.
  • Ensure the light is properly connected to the 12V transformer.
  • Verify that the power switch on the transformer (if applicable) is in the 'ON' position.
• APP Connection Issues:
  • Ensure Bluetooth is enabled on your smartphone.
  • Make sure your smartphone is within range of the pool light.
  • Restart the app and try reconnecting.
  • If issues persist, try restarting the pool light by unplugging and re-plugging the power adapter.
• Inconsistent Light Performance:
  • Check for any obstructions between the light and your smartphone that might interfere with the Bluetooth signal.
  • Ensure the light's surface is clean and free from debris that could affect light output.

7. Warranty & Support

The LyLmLe 20W Smart Magnetic LED Pool Light (Model R-PL28-CB20W) comes with a 2-year manufacturer's warranty.

For warranty claims, technical support, or any questions regarding your product, please contact LyLmLe customer service through the retailer where you purchased the product or refer to the contact information provided in your product packaging.