ELECOM NESTOUT 10000mAh Rugged Power Bank

Introduction

Thank you for choosing the ELECOM NESTOUT 10000mAh Rugged Power Bank. This device is designed for outdoor use, offering robust power delivery with advanced protection features. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

Image: The ELECOM NESTOUT 10000mAh Rugged Power Bank, featuring its distinctive bottle-like design and textured black finish.

Package Contents

• NESTOUT 10000mAh Power Bank
• USB-C Charging Cable
• Product Manual

Note: Tripod and lights are not included with the power bank and must be purchased separately.

Key Features

• 10000mAh Capacity: Provides ample power for multiple device charges.
• Fast Charging Capability: Equipped with USB-C ports supporting USB Power Delivery for rapid charging of compatible electronic devices.
• Smart Power Delivery: Automatically detects and allocates optimal power to connected devices.
• IP67 Waterproof & Dustproof: Designed to withstand submersion up to 1 meter for 30 minutes and is fully protected against dust ingress.
• Shockproof Construction: Features a hard shell body with an internal silicone cushion, tested to US Military Standard MIL-STD 810G 516.7 Drop Test.
• Integrated Tripod Mount: Standard ¼ 20” tripod mount on the bottom for versatile positioning.
• Modular Accessory Compatibility: Designed to integrate with NESTOUT accessories like the LAMP-1 lantern and FLASH-1 LED Panel.
• 6 Circuit Protection: Includes safeguards against overcharge, overvoltage, over-discharge, short circuit, overcurrent, and temperature detection.

Image: An infographic highlighting the core features of the NESTOUT 10000mAh Outdoor Battery, including its capacity, rapid charging, ability to be used while charging, and flight safety.

Setup

Charging the Power Bank

1. Unscrew the protective cap located at the top of the power bank.
2. Connect the provided USB-C charging cable to the USB-C input port on the power bank.
3. Connect the other end of the USB-C cable to a compatible USB Power Delivery (PD) wall adapter (18W or above recommended).
4. The LED indicator lights on the power bank will illuminate to show the charging status.
5. Once fully charged, disconnect the cable and securely screw the protective cap back on to maintain the IP67 rating.

Video: A demonstration of how to open the protective cap, connect a USB-C cable to charge the power bank, and securely close the cap to ensure its waterproof and dustproof integrity.

Operating Instructions

Charging External Devices

1. Unscrew the protective cap to access the USB-A and USB-C output ports.
2. Connect your device's charging cable to the appropriate port on the power bank.
3. The power bank will automatically begin charging your device. The LED indicators will show the remaining battery level.
4. Once charging is complete, disconnect your device and securely replace the protective cap.

Image: The NESTOUT power bank connected to and charging a smartphone and a portable speaker, demonstrating its multi-device charging capability in an outdoor environment.

Using Modular Accessories (Sold Separately)

The NESTOUT Power Bank is designed to work seamlessly with dedicated modular accessories, such as the LAMP-1 lantern and FLASH-1 LED Panel. These accessories attach directly to the power bank's ports.

1. Unscrew the protective cap from the desired port on the power bank.
2. Align the accessory with the port and firmly push it into place until it clicks securely.
3. Ensure the accessory is properly seated to maintain the waterproof seal.
4. Operate the accessory according to its specific instructions.
5. To remove, gently pull the accessory while pressing any release mechanisms, then replace the protective cap on the power bank.

Video: A detailed demonstration of attaching and operating the NESTOUT LAMP-1 accessory with a NESTOUT power bank, including how to ensure a secure, waterproof connection and adjust the light settings.

Images: The NESTOUT LAMP-1 lantern and FLASH-1 LED Panel, optional accessories that connect to the power bank for illumination.

Using the Tripod Mount

The power bank features a ¼ 20” tripod mount on its base, allowing it to be securely attached to mini tripods or other compatible mounting solutions.

Image: A close-up view of a hand screwing a tripod attachment into the ¼ 20” thread located at the bottom of the power bank.

Maintenance and Care

• Waterproof & Dustproof: Always ensure the protective caps are securely screwed on when not in use to maintain the IP67 rating. After exposure to water or dust, clean the exterior and dry thoroughly before opening the caps.
• Shockproof: While designed to be rugged, avoid unnecessary drops or impacts to prolong the product's lifespan.
• Cleaning: Use a soft, damp cloth to clean the exterior. Do not use harsh chemicals or abrasive materials.
• Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.

Image: The NESTOUT power bank submerged in water, illustrating its IP67 waterproof and dustproof design for outdoor use.

Image: A close-up of the NESTOUT power bank floating in water, emphasizing its sealed ports and rugged exterior.

Image: The NESTOUT power bank covered in sand, demonstrating its dustproof capabilities.

Image: An exploded view diagram illustrating the internal shock absorption cushion that protects the lithium-ion battery within the power bank's rugged casing.

Troubleshooting

• Device not charging: Ensure the power bank is charged. Check that the charging cable is securely connected to both the power bank and your device. Try a different cable or port.
• Power bank not charging: Ensure the USB-C charging cable is connected to a compatible power source (18W PD adapter recommended). Check the cable and adapter for damage.
• Slow charging: Ensure you are using a fast-charging compatible cable and adapter. Some devices may charge slower if their power requirements exceed the power bank's output or if the power bank's battery is low.
• LED indicators not working: Press the power button to check the battery status. If the issue persists after charging, contact customer support.

Specifications

Warranty and Support

This product is covered by a 1-year warranty. In the unlikely event of a product defect or quality issue within one year of purchase, ELECOM will replace the defective product. To initiate a return or exchange, please visit the ELECOM USA website (elecomusa.com) and use the provided return/exchange request form. For more detailed information regarding the warranty policy, please refer to the official website.

For further assistance or inquiries, please contact ELECOM customer support through the official website.