Jack & Rose LT-9058

Jack & Rose Fireplace Flame Diffuser

Model LT-9058 User Manual

Introduction

This manual provides instructions for the safe and efficient operation of your Jack & Rose Fireplace Flame Diffuser, Model LT-9058. This device is designed to disperse essential oils and create a soothing atmosphere with its unique flame effect. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Instructions

  • Always place the diffuser on a stable, flat surface.
  • Do not immerse the unit in water or any other liquid.
  • Keep out of reach of children and pets.
  • Use only the provided power adapter.
  • Do not block the mist outlet.
  • Unplug the diffuser before cleaning or refilling.
  • Do not overfill the water tank beyond the MAX line.
  • Only use 100% pure essential oils.
  • The diffuser features an automatic shut-off function when water runs low.

Package Contents

  • Jack & Rose Fireplace Flame Diffuser Unit
  • Power Adapter
  • User Manual

Product Overview

The Jack & Rose Fireplace Flame Diffuser combines aromatherapy with a visual flame effect. It features a 500ml water tank, quiet operation, and multiple timer settings.

Jack & Rose Fireplace Flame Diffuser in use, showing the flame effect and mist output.

Image: The Jack & Rose Fireplace Flame Diffuser operating, displaying its flame effect and mist. This image illustrates the product's aesthetic and function.

Setup Instructions

  1. Placement: Place the diffuser on a flat, stable surface away from direct sunlight, heat sources, and electronic devices.
  2. Open the Lid: Gently remove the top cover of the diffuser.
  3. Add Water: Fill the water tank with clean tap water. Do not exceed the "MAX LINE" indicator.
    4. Hand adding water to the diffuser, clearly showing the 'MAX LINE' indicator inside the water tank.

    Image: A hand carefully adding water to the diffuser's reservoir, highlighting the crucial "MAX LINE" to prevent overfilling.

  4. Add Essential Oils: Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust the amount based on personal preference.
  5. Close the Lid: Replace the top cover securely.
  6. Connect Power: Plug the power adapter into the diffuser's power port, then plug the adapter into a standard electrical outlet.

Operating Instructions

  • Power On/Off: Press the power button once to turn on the diffuser and activate the flame effect. Press again to turn off.
  • Timer Settings: Press the timer button to cycle through the available timer options: 1 hour, 3 hours, 6 hours, or continuous operation. The diffuser will automatically shut off when the timer expires or when the water level is low.
  • Flame Effect: The flame effect is typically activated automatically when the diffuser is turned on. Refer to the specific button layout on your device for dedicated flame effect controls if available.

Maintenance and Cleaning

Regular cleaning helps ensure optimal performance and extends the lifespan of your diffuser.

  1. Daily Maintenance:
    • Unplug the diffuser.
    • Empty any remaining water from the tank.
    • Wipe the inside of the water tank with a clean, soft cloth.
  2. Weekly Cleaning:
    • Unplug the diffuser and empty the water.
    • Add a small amount of warm water (not hot) and 1-2 drops of white vinegar to the water tank.
    • Let it soak for 5-10 minutes.
    • Gently wipe the ultrasonic plate (the small ceramic disc at the bottom of the tank) with a cotton swab to remove any mineral buildup or oil residue.
    • Rinse the tank thoroughly with clean water, avoiding the air outlet.
    • Wipe dry with a soft cloth.

Important: Do not use harsh detergents, abrasive cleaners, or metal objects to clean the diffuser, as this may damage the unit.

Troubleshooting

ProblemPossible CauseSolution
No mist or weak mist
  • Insufficient water in tank.
  • Water level exceeds MAX line.
  • Ultrasonic plate dirty.
  • Lid not properly closed.
  • Add water to the appropriate level.
  • Empty excess water.
  • Clean the ultrasonic plate as per maintenance instructions.
  • Ensure the lid is securely in place.
Diffuser leaks water
  • Overfilled water tank.
  • Lid not properly sealed.
  • Unit placed on an uneven surface.
  • Do not exceed the MAX line.
  • Ensure the lid is correctly positioned and sealed.
  • Place the diffuser on a flat, stable surface.
Diffuser automatically shuts off unexpectedly
  • Water level is too low.
  • Timer setting expired.
  • Refill the water tank.
  • Reset the timer or select continuous mode.

Specifications

  • Brand: Jack & Rose
  • Model Name: LT-9058
  • Capacity: 500 Milliliters
  • Coverage Area: Up to 480 Square Feet
  • Power Source: Corded Electric
  • Wattage: 14 watts
  • Product Dimensions: 6.3"L x 6.3"W x 5.3"H
  • Material: Plastic
  • Special Features: Automatic Shut-Off, Silent Operation, Timer (1H/3H/6H)

Warranty and Support

This product is covered by a manufacturer's warranty. For warranty claims, technical support, or any inquiries regarding your Jack & Rose Fireplace Flame Diffuser, please contact the retailer or manufacturer directly. Please retain your proof of purchase for warranty service.

© 2023 Jack & Rose. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.