1. Introduction
This manual provides essential information for the safe and efficient operation of your Vonyx VM-KG08 8-Channel Mixing Console. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
The Vonyx VM-KG08 is a versatile 8-channel mixing console featuring Bluetooth connectivity, an integrated MP3 player, a USB audio interface for recording, a digital sound processor with 99 effects, and switchable +48V phantom power. It is designed for various audio applications, including small concerts and bars.
2. Safety Instructions
- Power Supply: Connect the device only to a 5V USB power source as specified. Ensure the power source is stable.
- Moisture: Do not expose the unit to rain or moisture to prevent electric shock.
- Ventilation: Ensure adequate ventilation around the unit. Do not block ventilation openings.
- Heat Sources: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Servicing: Do not attempt to service this unit yourself. Refer all servicing to qualified service personnel. Opening the cover may expose you to dangerous voltages or other hazards.
- Cleaning: Clean only with a dry cloth.
- Phantom Power: When using microphones that do not require phantom power, ensure +48V phantom power is switched off for those channels to prevent damage.
WARNING: To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
3. Setup
3.1 Unpacking
Carefully unpack the mixing console and check for any signs of damage during transit. Retain the original packaging for future transport or storage.
3.2 Power Connection
Connect the mixing console to a 5V USB power source using the provided USB cable. The power input is located on the rear panel.
3.3 Input Connections
- Channels 1-4: Connect microphones or line-level instruments using XLR or 6.3mm jack cables.
- Channels 5/6 (Stereo): Connect stereo line-level sources using 6.3mm jack cables or a 3.5mm stereo jack cable.
- Channels 7/8 (Stereo): Connect stereo line-level sources using 6.3mm jack cables.
3.4 Output Connections
- Main Output: Connect to your main PA system or amplifier using balanced XLR cables.
- Monitor Output: Connect to monitor speakers using unbalanced 6.3mm jack cables.
- Headphone Output: Connect headphones using a 6.3mm jack.
4. Operating Instructions
4.1 Powering On/Off
Press the POWER button located on the top right of the console to turn the unit on or off. The LED display will illuminate upon power-on.
4.2 Channel Controls
- GAIN/TRIM: Adjusts the input sensitivity for each channel. Use the PAD switch (channels 1-4) to attenuate strong signals if distortion occurs.
- EQ (High, Mid, Low): Adjusts the tonal balance for each channel. The mid-range control is adjustable.
- PAN/BALANCE: Adjusts the stereo position of the channel signal.
- LEVEL: Controls the overall volume of the channel sent to the main mix.
- +48V Phantom Power: Switchable for channels 1-4. Activate only when using condenser microphones that require phantom power.
4.3 Digital MP3 Player
Insert a USB drive containing MP3 files into the USB port. Use the controls on the digital display section to play, pause, skip tracks, and adjust volume. The display shows track number and playback time.
4.4 Bluetooth Connectivity
Activate Bluetooth mode on the mixing console. On your smartphone or tablet, search for "Vonyx VM-KG08" (or similar) and pair. Audio streamed from your device will play through the mixer.
4.5 USB Audio Interface
Connect the mixer to a computer via the USB "TO PC" port. The mixer will function as an audio interface, allowing you to record the mixed audio directly to your computer or play audio from your computer through the mixer.
4.6 DSP Effects Processor
The VM-KG08 features a 32-bit DSP with 99 effects. Use the PROGRAM knob to select an effect. Adjust the FX LEVEL control for each channel to send signal to the effects processor, and the main FX/SEND control to adjust the overall effect return level.
A list of effects is typically printed on the console near the DSP section for quick reference.
5. Maintenance
- Cleaning: Regularly wipe the surface of the mixer with a soft, dry, lint-free cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ventilation: Ensure ventilation slots remain clear of dust and debris.
- Cable Management: Avoid sharp bends or excessive tension on cables connected to the mixer.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted sound |
|
|
| Bluetooth not connecting |
|
|
| USB MP3 player not working |
|
|
7. Specifications
| Inputs per channel 1-4: | XLR and 6.3mm jack (mono) |
| Inputs per channel 5/6: | 6.3mm jack (mono or stereo) or 3.5mm jack (stereo) |
| Inputs per channel 7/8: | 6.3mm jack (mono or stereo) |
| Main Output: | Balanced XLR |
| Monitor Output: | Unbalanced 6.3mm jack |
| Headphone Connection: | 6.3mm jack |
| DSP Resolution: | 32-bit |
| Frequency Range: | 20 Hz - 20,000 Hz |
| THD: | <0.5% |
| Connection Voltage: | 5 V (via USB) |
| Dimensions (L x W x H): | 27.5 x 33 x 6 cm |
| Weight: | 2.5 kg |
8. Warranty and Support
The product comes with a 2-year spare parts availability guarantee. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
Software updates are not explicitly guaranteed for this product. Please refer to the manufacturer's official website for any available updates or additional support resources.
