Introduction
Thank you for choosing the TOLOCO Cordless Hand Massager. This device is designed to provide a relaxing hand massage experience through air compression, vibration, and heat therapy. Please read this manual thoroughly before use to ensure proper operation, safety, and maintenance.
Image Description: The TOLOCO Cordless Hand Massager, white with rose gold accents, displayed alongside its product packaging, a yellow finger exerciser, and two blue stress balls. This image shows the complete product package.
Important Safety Information
Always follow these safety guidelines to prevent injury or damage to the device:
- Read all instructions before using the massager.
- Do not use while driving or operating heavy machinery.
- Avoid using on open wounds, inflamed skin, swollen areas, or over sensitive body parts.
- If you have a medical condition, are pregnant, or have a pacemaker, consult a doctor before use.
- Limit the duration of heat and air compression functions to prevent skin or tissue damage.
- Keep out of reach of children.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Use only the provided charging cable.
- Do not immerse the device in water or other liquids.
Legal Disclaimer: This product is not intended to diagnose, treat, cure, or prevent any disease or health condition. Consult a healthcare professional for medical advice.
Product Overview
The TOLOCO Cordless Hand Massager combines air compression, vibration, and heat to provide a comprehensive hand massage. It is designed to target the entire hand, including fingers, knuckles, and palm.
Components
- Main Massager Unit
- USB Charging Cable
- User Manual (this document)
- Optional: Finger exerciser and stress balls (may be included with some packages)
Control Panel and Indicators
The device features an intuitive control panel with LED indicators for various functions.
Image Description: A close-up view of the TOLOCO Hand Massager's control panel. It features a central circular display surrounded by five buttons: Power, Mode, Intensity, Heat, and Vibration. LED indicators show battery level, massage modes (L1-L6), and intensity levels (P0-P5).
- Power Button: Turns the device on/off.
- Mode Button: Cycles through 6 compression massage modes.
- Intensity Button: Adjusts the air compression intensity through 6 levels.
- Heat Button: Activates/deactivates the heat function.
- Vibration Button: Activates/deactivates vibration modes (2 modes available).
- Battery Indicator: Shows the current battery charge level.
Setup
Charging the Device
- Before first use, fully charge the hand massager.
- Connect the USB charging cable to the charging port on the device.
- Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
- The battery indicator lights will show charging progress. Once fully charged, the indicators will remain solid.
The device is cordless and portable once charged, allowing for use in various locations.
Image Description: The TOLOCO Hand Massager displayed with its dimensions (11.8 inches height, 6.3 inches width) and internal hand chamber dimensions (5.1 inches length, 3.5 inches width). Icons indicate its suitability for easy storage, travel, and lightweight design.
Operating Instructions
- Power On: Press and hold the Power Button to turn on the device.
- Position Hand: Insert your hand into the massager, ensuring your palm and fingers are comfortably placed within the chamber.
- Select Mode: Press the Mode Button to cycle through the 6 available compression massage modes (L1-L6).
- Adjust Intensity: Press the Intensity Button to select one of the 6 air compression intensity levels (P0-P5). It is recommended to start at the lowest pressure (P0) and gradually increase as desired.
- Activate Heat: Press the Heat Button to turn on the soothing heat function. Press again to turn off.
- Activate Vibration: Press the Vibration Button to activate one of the 2 vibration modes. Press again to cycle or turn off.
- Power Off: Press and hold the Power Button to turn off the device after use.
The massager is designed to provide targeted relief to the wrist, palm, and fingers through air compression and optional heat.
Image Description: An internal diagram of the hand massager showing how air compression targets different areas of the hand: wrist relaxing, palm massage, and finger compression. Arrows indicate the direction of pressure and heat distribution.
Modes and Settings
The TOLOCO Hand Massager offers customizable settings to suit individual preferences and needs.
- 6 Compression Modes: Varying patterns of air pressure for different massage sensations.
- 6 Intensity Levels: Adjustable air pressure strength from gentle to strong.
- 2 Vibration Modes: Provides additional soothing sensation.
Image Description: A hand placed inside the massager, illustrating the heat therapy function. Orange arrows emanate from the device's interior, symbolizing the gentle warmth provided to the hand.
Heat Therapy
The integrated heat function provides gentle warmth to your hands, which can help promote blood circulation and alleviate soreness, numbness, and coldness in fingers and palms. This feature can be activated or deactivated independently using the Heat Button.
Maintenance and Care
- Cleaning: Wipe the exterior of the massager with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in frequent use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully using the provided USB cable. |
| No air compression. | Mode or intensity not selected. | Ensure a massage mode and intensity level are selected on the control panel. |
| No heat. | Heat function not activated. | Press the Heat Button to activate the heat function. Allow a few minutes for the heat to become noticeable. |
| Massage feels too weak or too strong. | Intensity level is not suitable. | Adjust the intensity level using the Intensity Button. Start with lower settings and gradually increase. |
If the problem persists after trying these solutions, please contact TOLOCO customer support.
Specifications
- Model Number: FE-0134
- Product Dimensions: 5 x 6 x 3 inches
- Item Weight: 2.78 Pounds
- Power Source: Battery Powered
- Material: Acrylonitrile Butadiene Styrene
- Manufacturer: TOLOCO
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official TOLOCO website. Please have your model number (FE-0134) and purchase date available when contacting support.
You can visit the TOLOCO Store for more information: TOLOCO Store
