1. Introduction and Overview
Thank you for choosing the PAWPRO PP6-A Replacement Collar. This collar is designed to be an additional or replacement unit for your existing PAWPRO PP6-A electric dog training system. It cannot be used as a standalone device and requires pairing with a compatible PAWPRO remote control.
This collar provides three safe and effective training modes: Beep, Vibration, and Static Stimulation (Shock), helping to correct unwanted behaviors and foster a balanced relationship with your dog. It is built with high-quality, hypoallergenic materials, ensuring your pet's comfort and safety.
Image 1.1: The PAWPRO PP6-A Replacement Collar. This collar is designed to integrate seamlessly with your existing PAWPRO PP6-A remote control system.
2. Product Components
Your PAWPRO PP6-A Replacement Collar package includes the following:
- 1 x PAWPRO PP6-A Replacement Collar Receiver
- 4 x Metal Contact Points (various sizes for different coat lengths)
- 1 x Spring Contact Point
- 4 x Protective Silicone Caps for Contact Points
Image 2.1: The PAWPRO PP6-A Replacement Collar shown with its accompanying accessories, including contact points and protective caps.
Image 2.2: A detailed view of the various contact points and silicone caps provided with the collar, designed for optimal fit and comfort.
3. Setup: Pairing Procedure
To use your new PAWPRO PP6-A Replacement Collar, it must be paired with your existing PAWPRO remote control. The pairing process is quick and easy.
Image 3.1: Visual guide for the pairing procedure of the PAWPRO collar to your remote control.
Step-by-Step Pairing Instructions:
- Turn off your new collar: If the collar is on, press the PAWPRO button for 2 seconds until it vibrates and flashes red twice. Place the collar next to your remote control.
- Set the remote control channel: Set your remote control to channel 1 (or channel 2 if you are using the new collar to control a second dog).
- Activate collar pairing mode: On your collar (which you turned off in step 1), press the PAWPRO button for 3 seconds until a red and green light flashes alternately.
- Initiate pairing on remote: Then, simultaneously press and hold the BEEP + VIBRATION button on the remote control for 2 seconds to pair it with the collar.
- Confirmation: If all of these steps have been completed successfully, the pairing has been successful and the collar will emit a BEEP 3 times as well as flash green 3 times.
If you encounter any difficulties during the pairing process, please refer to the Troubleshooting section or contact our US Customer Service Team.
4. Operating the Collar
Once paired, the PAWPRO PP6-A Replacement Collar operates in conjunction with your PAWPRO remote control, offering various modes to assist in training.
Training Modes:
- Beep Mode: Delivers an audible tone. Ideal for initial commands and positive reinforcement.
- Vibration Mode: Provides a gentle vibration. Useful for gaining your dog's attention without static stimulation.
- Static Stimulation (Shock) Mode: Offers 16 adjustable levels of static stimulation. Use this mode responsibly and at the lowest effective level for correction.
Key Features:
- Long Range: Operates effectively up to 3000 feet (approximately 914 meters), providing ample freedom for training in various environments.
- IPX7 Waterproof: The collar is fully waterproof, allowing your dog to swim or play in the rain without damaging the device.
- Long Battery Life: Provides more than 15 days of battery life on a single charge, depending on usage.
- Quick Recharge: Fully recharges in approximately 2 hours.
- Dog Compatibility: Suitable for all dogs weighing over 3 kg (6.6 lbs) and puppies over 4 months old.
Image 4.1: A dog wearing the PAWPRO collar, demonstrating its waterproof capability and its role in correcting unwanted behaviors such as excessive barking or running away.
Image 4.2: A visual guide illustrating the PAWPRO collar's compatibility with various dog breeds and sizes, ranging from small puppies to large adult dogs (6 lbs to 130 lbs).
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your PAWPRO PP6-A Replacement Collar.
Charging:
- Connect the collar to a standard USB charger using the provided charging cable.
- A full charge typically takes approximately 2 hours.
- Ensure the charging port is dry before connecting the charger.
Cleaning:
- Due to its IPX7 waterproof rating, the collar can be rinsed with water.
- Wipe the collar clean with a damp cloth. For stubborn dirt, use a mild soap solution.
- Regularly clean the contact points to ensure proper conductivity and prevent skin irritation for your dog.
- Ensure the collar is completely dry before storing or recharging.
Storage:
Store the collar in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
6. Troubleshooting
If you experience issues with your PAWPRO PP6-A Replacement Collar, please review the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote | Not paired, low battery, out of range | Re-pair the collar (see Section 3). Charge the collar. Ensure you are within the 3000 ft range. |
| Collar not charging | Faulty cable/charger, dirty charging port | Try a different USB cable and charger. Clean the charging port. |
| Static stimulation not felt | Incorrect contact points, poor contact, low battery | Ensure contact points are appropriate for dog's coat length and make good skin contact. Charge the collar. |
| Collar indicator light not working | Low battery, internal fault | Charge the collar. If issue persists, contact customer service. |
If the problem persists after attempting these solutions, please contact PAWPRO Customer Service for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | PP6-A |
| Brand | PAWPRO |
| Training Modes | Beep, Vibration, Static Stimulation (16 levels) |
| Range | Up to 3000 ft (approx. 914 meters) |
| Waterproof Rating | IPX7 |
| Battery Life | More than 15 days (usage dependent) |
| Recharge Time | Approx. 2 hours |
| Compatible Dog Weight | Over 3 kg (6.6 lbs) |
| Compatible Dog Age | Puppies over 4 months old, Adult dogs |
| Material | Nylon (collar strap), Hypoallergenic materials (receiver) |
| Color | Black |
| Item Weight | 5.6 ounces |
8. Warranty and Support
PAWPRO is a French Brand committed to providing high-quality training collars while ensuring your dog's safety. Our products comply with the strictest American regulations.
For any questions, technical support, or warranty inquiries, our dedicated US Customer Service Team is ready to assist you. Please refer to the contact information provided with your original PAWPRO system or visit the official PAWPRO website for the most up-to-date support details.
We are dedicated to ensuring your satisfaction and the well-being of your pet.
