Prilotte Tire Inflator Portable Air Compressor P005 User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your Prilotte P005 Portable Air Compressor. Please read this manual thoroughly before first use and retain it for future reference. This device is designed for inflating various items such as car, motorcycle, and bicycle tires, as well as sports balls.

2. Package Contents

Ensure all items are present upon unboxing:

• Air Pump (1)
• User Manual (1)
• Attachments (4)
• Storage Bag (1)
• Charger Cable (1)

Figure 2.1: Prilotte P005 Portable Air Compressor with included accessories.

3. Product Features

• High Capacity Battery: Equipped with a 20000mAh rechargeable battery for cordless operation.
• Fast Inflation: Built-in high-performance chip provides 34 L/min airflow, inflating small car tires (27-36 PSI) in less than 1 minute.
• Preset Modes & Auto-Stop: Features 4 preset inflation modes for cars, motorcycles, bikes, and balls. Automatically stops when the preset pressure is reached. Manual mode allows setting pressure up to 150 PSI.
• Large LED Digital Display: Shows real-time and preset pressure values for easy monitoring.
• Multi-functional Design: Includes an LED light for emergency illumination and USB-C input/USB-A output ports, allowing it to function as a power bank for mobile devices.
• Portable: Lightweight and compact design with an included storage bag for easy transport and storage.

Figure 3.1: Overview of the Prilotte P005's multi-functional capabilities.

4. Setup

4.1 Initial Charging

Before first use, ensure the device is charged. Connect the provided charger cable to the USB-C input port on the device and to a suitable power source. The device requires approximately 3 seconds of charging to power up for the first time.

4.2 Attaching the Air Hose

1. Locate the orange-colored port on the top of the inflator.
2. Screw the air hose clockwise into this port until it is securely fastened.

4.3 Attaching Nozzles/Adapters

Select the appropriate adapter for the item you wish to inflate. The device includes various attachments for different valve types (e.g., Presta to Schrader valve adapter, needle adapter for balls, general inflatables).

1. Attach the chosen adapter to the end of the air hose.
2. Ensure it is securely connected to prevent air leakage during inflation.

Figure 4.1: Steps for connecting the air hose and preparing for inflation.

5. Operating Instructions

5.1 Powering On/Off

• To power on: Press and hold the power button (usually the central button) for a few seconds until the LED display illuminates.
• To power off: Press and hold the power button again until the display turns off.

5.2 Selecting Inflation Mode

• Press the 'M' (Mode) button to cycle through the preset inflation modes: Car, Motorcycle, Bicycle, and Ball.
• Each mode has a default PSI setting.
• For custom pressure, select manual mode or adjust the preset mode.

5.3 Setting Target Pressure

• Use the '+' and '-' buttons to increase or decrease the target pressure value.
• The display will show the real-time pressure and your set target pressure.

5.4 Starting/Stopping Inflation

1. Securely connect the air hose (with appropriate adapter) to the item's valve.
2. Press the power button once to start inflation. The device will automatically stop when the target pressure is reached.
3. To manually stop inflation, press the power button again.

Figure 5.1: Operating steps for the Prilotte P005.

5.5 Using the LED Flashlight

• Press the flashlight button (often indicated by a sun or lightbulb icon) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady, flashing, SOS).
• Press and hold to turn off the flashlight.

5.6 Using as a Power Bank

• Connect your mobile device's charging cable to the USB-A output port on the inflator.
• The inflator will begin charging your device.

Figure 5.2: Charging the inflator and using it as a power bank.

6. Maintenance

6.1 Overheating Prevention

To prevent damage from overheating, do not operate the device continuously for more than 10 minutes. If continuous use is required, allow the device to cool down for at least 10 minutes before restarting.

6.2 Charging and Storage

• Regularly charge the device to maintain battery health.
• Store the inflator and all accessories in the provided storage bag to prevent loss or damage.

7. Troubleshooting

• Device not powering on: Ensure the device has sufficient battery charge. Connect to a power source using the charger cable.
• Inflation is slow or stops unexpectedly: Check the battery level. Ensure the air hose and adapters are securely connected. Allow the device to cool down if it has been running for more than 10 minutes.
• Inaccurate pressure reading: Ensure the air hose is properly connected to the valve without leaks.

8. Specifications

9. Warranty and Support

For any product issues within 6 months of your order, please contact the Amazon customer service team for support. The product is subject to Amazon's standard return policy.

10. Additional Resources

No official seller videos are available for this product based on the provided criteria.